From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:6f8:1178:4:290:27ff:fe1d:cc33]) by merlin.infradead.org with esmtps (Exim 4.76 #1 (Red Hat Linux)) id 1T8oip-0002L6-VY for barebox@lists.infradead.org; Tue, 04 Sep 2012 08:43:02 +0000 Date: Tue, 4 Sep 2012 10:42:58 +0200 From: Sascha Hauer Message-ID: <20120904084258.GR26594@pengutronix.de> References: <1346672765-16162-1-git-send-email-jlu@pengutronix.de> <1346672765-16162-9-git-send-email-jlu@pengutronix.de> MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: <1346672765-16162-9-git-send-email-jlu@pengutronix.de> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: barebox-bounces@lists.infradead.org Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: [PATCH 08/10] drivers/net: add driver for the EMAC device found in some TI SoCs To: Jan Luebbe Cc: barebox@lists.infradead.org On Mon, Sep 03, 2012 at 01:46:03PM +0200, Jan Luebbe wrote: > Signed-off-by: Jan Luebbe > --- > arch/arm/mach-omap/include/mach/emac_defs.h | 53 +++ > drivers/net/Kconfig | 5 + > drivers/net/Makefile | 1 + > drivers/net/davinci_emac.c | 619 +++++++++++++++++++++++++++ > drivers/net/davinci_emac.h | 331 ++++++++++++++ > 5 files changed, 1009 insertions(+) > create mode 100644 arch/arm/mach-omap/include/mach/emac_defs.h > create mode 100644 drivers/net/davinci_emac.c > create mode 100644 drivers/net/davinci_emac.h > > diff --git a/arch/arm/mach-omap/include/mach/emac_defs.h b/arch/arm/mach-omap/include/mach/emac_defs.h > new file mode 100644 > index 0000000..ef930fc > --- /dev/null > +++ b/arch/arm/mach-omap/include/mach/emac_defs.h > +struct davinci_emac_priv { > + struct device_d *dev; > + struct eth_device edev; > + struct mii_device miidev; > + void __iomem *regs; This seems to be filled in in probe(), but otherwise unused. > + > + /* EMAC Addresses */ > + emac_regs *adap_emac; /* = (emac_regs *)EMAC_BASE_ADDR; */ > + ewrap_regs *adap_ewrap; /* = (ewrap_regs *)EMAC_WRAPPER_BASE_ADDR; */ > + mdio_regs *adap_mdio; /* = (mdio_regs *)EMAC_MDIO_BASE_ADDR; */ These should be filled in by resources, not hardcoded addresses. > +}; > + > +/* davinci_eth_mac_addr[0] goes out on the wire first */ > + > +static u_int8_t davinci_eth_mac_addr[] = { 0x00, 0xff, 0xff, 0xff, 0xff, 0x00 }; Add this to struct davinci_emac_priv > + > +/* > + * This function must be called before emac_open() if you want to override > + * the default mac address. > + */ > +void davinci_eth_set_mac_addr(const u_int8_t *addr) static please. If you intend to call this from somewhere else than this file there is something wrong. > +} > + > +/* Read a PHY register via MDIO inteface. Returns 1 on success, 0 otherwise */ > +int davinci_eth_phy_read(struct davinci_emac_priv *priv, u_int8_t phy_addr, u_int8_t reg_num, u_int16_t *data) static > +{ > + int tmp; > + > + while (readl(&priv->adap_mdio->USERACCESS0) & MDIO_USERACCESS0_GO); > + > + writel(MDIO_USERACCESS0_GO | > + MDIO_USERACCESS0_WRITE_READ | > + ((reg_num & 0x1f) << 21) | > + ((phy_addr & 0x1f) << 16), > + &priv->adap_mdio->USERACCESS0); > + > + /* Wait for command to complete */ > + while ((tmp = readl(&priv->adap_mdio->USERACCESS0)) & MDIO_USERACCESS0_GO); > + > + if (tmp & MDIO_USERACCESS0_ACK) { > + *data = tmp & 0xffff; > + dev_dbg(priv->dev, "emac_phy_read: addr=0x%02x reg=0x%02x data=0x%04x\n", > + phy_addr, reg_num, *data); > + return 1; > + } > + > + *data = -1; > + return 0; > +} > + > +/* Write to a PHY register via MDIO inteface. Blocks until operation is complete. */ > +int davinci_eth_phy_write(struct davinci_emac_priv *priv, u_int8_t phy_addr, u_int8_t reg_num, u_int16_t data) static > +{ > + > + while (readl(&priv->adap_mdio->USERACCESS0) & MDIO_USERACCESS0_GO); > + > + dev_dbg(priv->dev, "emac_phy_write: addr=0x%02x reg=0x%02x data=0x%04x\n", > + phy_addr, reg_num, data); > + writel(MDIO_USERACCESS0_GO | > + MDIO_USERACCESS0_WRITE_WRITE | > + ((reg_num & 0x1f) << 21) | > + ((phy_addr & 0x1f) << 16) | > + (data & 0xffff), > + &priv->adap_mdio->USERACCESS0); > + > + /* Wait for command to complete */ > + while (readl(&priv->adap_mdio->USERACCESS0) & MDIO_USERACCESS0_GO); > + > + return 1; > +} > + > +static int davinci_miidev_read(struct mii_device *dev, int addr, int reg) > +{ > + struct davinci_emac_priv *priv = (struct davinci_emac_priv *)dev->edev->priv; > + uint16_t value = 0; > + return davinci_eth_phy_read(priv, addr, reg, &value) ? value : -1; > +} > + > +static int davinci_miidev_write(struct mii_device *dev, int addr, int reg, int value) > +{ > + struct davinci_emac_priv *priv = (struct davinci_emac_priv *)dev->edev->priv; > + return davinci_eth_phy_write(priv, addr, reg, value) ? 0 : -1; > +} > + > +static int davinci_emac_get_ethaddr(struct eth_device *edev, unsigned char *adr) > +{ > + return -1; > +} > + > +static int davinci_emac_set_ethaddr(struct eth_device *edev, unsigned char *adr) > +{ > + davinci_eth_set_mac_addr(adr); > + return 0; > +} > + > +static int davinci_emac_init(struct eth_device *edev) > +{ > + dev_dbg(&edev->dev, "* emac_init\n"); > + return 0; > +} > + > +static int davinci_emac_open(struct eth_device *edev) > +{ > + struct davinci_emac_priv *priv = (struct davinci_emac_priv *)edev->priv; > + > + dv_reg_p addr; > + u_int32_t clkdiv, cnt; > + emac_desc *rx_desc; > + unsigned long mac_hi, mac_lo; > + int ret; > + > + dev_dbg(priv->dev, "+ emac_open\n"); > + > + dev_dbg(priv->dev, "emac->TXIDVER: 0x%08x\n", priv->adap_emac->TXIDVER); > + dev_dbg(priv->dev, "emac->RXIDVER: 0x%08x\n", priv->adap_emac->RXIDVER); > + > + /* Reset EMAC module and disable interrupts in wrapper */ > + writel(1, &priv->adap_emac->SOFTRESET); > + while (readl(&priv->adap_emac->SOFTRESET) != 0); > + writel(1, &priv->adap_ewrap->softrst); > + while (readl(&priv->adap_ewrap->softrst) != 0); > + > + writel(0, &priv->adap_ewrap->c0rxen); > + writel(0, &priv->adap_ewrap->c1rxen); > + writel(0, &priv->adap_ewrap->c2rxen); > + writel(0, &priv->adap_ewrap->c0txen); > + writel(0, &priv->adap_ewrap->c1txen); > + writel(0, &priv->adap_ewrap->c2txen); > + writel(0, &priv->adap_ewrap->c0miscen); > + writel(0, &priv->adap_ewrap->c1miscen); > + writel(0, &priv->adap_ewrap->c2miscen); > + > + rx_desc = priv->emac_rx_desc; > + > + /* > + * Set MAC Addresses & Init multicast Hash to 0 (disable any multicast > + * receive) > + * Use channel 0 only - other channels are disabled > + */ > + writel(0, &priv->adap_emac->MACINDEX); > + mac_hi = (davinci_eth_mac_addr[3] << 24) | > + (davinci_eth_mac_addr[2] << 16) | > + (davinci_eth_mac_addr[1] << 8) | > + (davinci_eth_mac_addr[0]); > + mac_lo = (davinci_eth_mac_addr[5] << 8) | > + (davinci_eth_mac_addr[4]); > + > + writel(mac_hi, &priv->adap_emac->MACADDRHI); > + writel(mac_lo | EMAC_MAC_ADDR_IS_VALID | EMAC_MAC_ADDR_MATCH, > + &priv->adap_emac->MACADDRLO); > + > + /* Set source MAC address - REQUIRED */ > + writel(mac_hi, &priv->adap_emac->MACSRCADDRHI); > + writel(mac_lo, &priv->adap_emac->MACSRCADDRLO); > + > + /* Set DMA 8 TX / 8 RX Head pointers to 0 */ > + addr = &priv->adap_emac->TX0HDP; > + for(cnt = 0; cnt < 16; cnt++) > + *addr++ = 0; > + > + addr = &priv->adap_emac->RX0HDP; > + for(cnt = 0; cnt < 16; cnt++) > + *addr++ = 0; > + > + /* Clear Statistics (do this before setting MacControl register) */ > + addr = &priv->adap_emac->RXGOODFRAMES; > + for(cnt = 0; cnt < EMAC_NUM_STATS; cnt++) > + *addr++ = 0; > + > + /* No multicast addressing */ > + writel(0, &priv->adap_emac->MACHASH1); > + writel(0, &priv->adap_emac->MACHASH2); > + > + writel(0x01, &priv->adap_emac->TXCONTROL); > + writel(0x01, &priv->adap_emac->RXCONTROL); > + > + /* Create RX queue and set receive process in place */ > + priv->emac_rx_active_head = priv->emac_rx_desc; > + for (cnt = 0; cnt < EMAC_MAX_RX_BUFFERS; cnt++) { > + rx_desc->next = BD_TO_HW(rx_desc + 1); > + rx_desc->buffer = &priv->emac_rx_buffers[cnt * (EMAC_MAX_ETHERNET_PKT_SIZE + EMAC_PKT_ALIGN)]; > + rx_desc->buff_off_len = EMAC_MAX_ETHERNET_PKT_SIZE; > + rx_desc->pkt_flag_len = EMAC_CPPI_OWNERSHIP_BIT; > + rx_desc++; > + } > + > + /* Set the last descriptor's "next" parameter to 0 to end the RX desc list */ > + rx_desc--; > + rx_desc->next = 0; > + priv->emac_rx_active_tail = rx_desc; > + priv->emac_rx_queue_active = 1; > + > + /* Enable TX/RX */ > + writel(EMAC_MAX_ETHERNET_PKT_SIZE, &priv->adap_emac->RXMAXLEN); > + writel(0, &priv->adap_emac->RXBUFFEROFFSET); > + > + /* No fancy configs - Use this for promiscous for debug - EMAC_RXMBPENABLE_RXCAFEN_ENABLE */ > + writel(EMAC_RXMBPENABLE_RXBROADEN, &priv->adap_emac->RXMBPENABLE); > + > + /* Enable ch 0 only */ > + writel(0x01, &priv->adap_emac->RXUNICASTSET); > + > + /* Enable MII interface and full duplex mode (using RMMI) */ > + writel((EMAC_MACCONTROL_MIIEN_ENABLE | > + EMAC_MACCONTROL_FULLDUPLEX_ENABLE | > + EMAC_MACCONTROL_RMIISPEED_100), > + &priv->adap_emac->MACCONTROL); > + > + /* Init MDIO & get link state */ > + clkdiv = (EMAC_MDIO_BUS_FREQ / EMAC_MDIO_CLOCK_FREQ) - 1; > + writel((clkdiv & 0xff) | MDIO_CONTROL_ENABLE | MDIO_CONTROL_FAULT, > + &priv->adap_mdio->CONTROL); > + > + /* Start receive process */ > + writel(BD_TO_HW(priv->emac_rx_desc), &priv->adap_emac->RX0HDP); > + > + ret = miidev_wait_aneg(&priv->miidev); > + if (ret) > + return ret; > + > + ret = miidev_get_status(&priv->miidev); > + if (ret < 0) > + return ret; > + > + miidev_print_status(&priv->miidev); > + > + dev_dbg(priv->dev, "- emac_open\n"); > + > + return 0; > +} > + > +/* EMAC Channel Teardown */ > +static void davinci_eth_ch_teardown(struct davinci_emac_priv *priv, int ch) > +{ > + dv_reg dly = 0xff; > + dv_reg cnt; > + > + dev_dbg(priv->dev, "+ emac_ch_teardown\n"); > + > + if (ch == EMAC_CH_TX) { > + /* Init TX channel teardown */ > + writel(0, &priv->adap_emac->TXTEARDOWN); > + for(cnt = 0; cnt != 0xfffffffc; cnt = readl(&priv->adap_emac->TX0CP)) { > + /* Wait here for Tx teardown completion interrupt to occur > + * Note: A task delay can be called here to pend rather than > + * occupying CPU cycles - anyway it has been found that teardown > + * takes very few cpu cycles and does not affect functionality */ > + dly--; > + udelay(1); > + if (dly == 0) > + break; > + } > + writel(cnt, &priv->adap_emac->TX0CP); > + writel(0, &priv->adap_emac->TX0HDP); > + } else { > + /* Init RX channel teardown */ > + writel(0, &priv->adap_emac->RXTEARDOWN); > + for(cnt = 0; cnt != 0xfffffffc; cnt = readl(&priv->adap_emac->RX0CP)) { > + /* Wait here for Rx teardown completion interrupt to occur > + * Note: A task delay can be called here to pend rather than > + * occupying CPU cycles - anyway it has been found that teardown > + * takes very few cpu cycles and does not affect functionality */ > + dly--; > + udelay(1); > + if (dly == 0) > + break; > + } > + writel(cnt, &priv->adap_emac->RX0CP); > + writel(0, &priv->adap_emac->RX0HDP); > + } > + > + dev_dbg(priv->dev, "- emac_ch_teardown\n"); > +} > + > +static void davinci_emac_halt(struct eth_device *edev) > +{ > + struct davinci_emac_priv *priv = (struct davinci_emac_priv *)edev->priv; > + > + dev_dbg(priv->dev, "+ emac_halt\n"); > + > + davinci_eth_ch_teardown(priv, EMAC_CH_TX); /* TX Channel teardown */ > + davinci_eth_ch_teardown(priv, EMAC_CH_RX); /* RX Channel teardown */ > + > + /* Reset EMAC module and disable interrupts in wrapper */ > + writel(1, &priv->adap_emac->SOFTRESET); > + writel(1, &priv->adap_ewrap->softrst); > + > + writel(0, &priv->adap_ewrap->c0rxen); > + writel(0, &priv->adap_ewrap->c1rxen); > + writel(0, &priv->adap_ewrap->c2rxen); > + writel(0, &priv->adap_ewrap->c0txen); > + writel(0, &priv->adap_ewrap->c1txen); > + writel(0, &priv->adap_ewrap->c2txen); > + writel(0, &priv->adap_ewrap->c0miscen); > + writel(0, &priv->adap_ewrap->c1miscen); > + writel(0, &priv->adap_ewrap->c2miscen); > + > + dev_dbg(priv->dev, "- emac_halt\n"); > +} > + > +/* > + * This function sends a single packet on the network and returns > + * positive number (number of bytes transmitted) or negative for error > + */ > +static int davinci_emac_send(struct eth_device *edev, void *packet, int length) > +{ > + struct davinci_emac_priv *priv = (struct davinci_emac_priv *)edev->priv; > + uint64_t start = 0; > + int ret_status = -1; > + > + dev_dbg(priv->dev, "+ emac_send (length %d)\n", length); > + > + /* Check packet size and if < EMAC_MIN_ETHERNET_PKT_SIZE, pad it up */ > + if (length < EMAC_MIN_ETHERNET_PKT_SIZE) { > + length = EMAC_MIN_ETHERNET_PKT_SIZE; > + } > + > + /* Populate the TX descriptor */ > + writel(0, &priv->emac_tx_desc->next); > + writel((u_int8_t *) packet, &priv->emac_tx_desc->buffer); > + writel((length & 0xffff), &priv->emac_tx_desc->buff_off_len); > + writel(((length & 0xffff) | EMAC_CPPI_SOP_BIT | > + EMAC_CPPI_OWNERSHIP_BIT | > + EMAC_CPPI_EOP_BIT), > + &priv->emac_tx_desc->pkt_flag_len); > + dma_flush_range((ulong) packet, (ulong)packet + length); > + /* Send the packet */ > + writel(BD_TO_HW(priv->emac_tx_desc), &priv->adap_emac->TX0HDP); > + > + /* Wait for packet to complete or link down */ > + start = get_time_ns(); You initialize a timeout value. That's good. > + while (1) { > + if (readl(&priv->adap_emac->TXINTSTATRAW) & 0x01) { > + /* Acknowledge the TX descriptor */ > + writel(BD_TO_HW(priv->emac_tx_desc), &priv->adap_emac->TX0CP); > + ret_status = length; > + break; > + } > + } Unfortunately it's unused. > + > + dev_dbg(priv->dev, "- emac_send (ret_status %i)\n", ret_status); > + return ret_status; > +} > + > +/* > + * This function handles receipt of a packet from the network > + */ > +static int davinci_emac_recv(struct eth_device *edev) > +{ > + struct davinci_emac_priv *priv = (struct davinci_emac_priv *)edev->priv; > + emac_desc *rx_curr_desc; > + emac_desc *curr_desc; > + emac_desc *tail_desc; > + unsigned char *pkt; > + int status, len, ret = -1; > + > + dev_dbg(priv->dev, "+ emac_recv\n"); > + > + rx_curr_desc = priv->emac_rx_active_head; > + status = readl(&rx_curr_desc->pkt_flag_len); > + if ((rx_curr_desc) && ((status & EMAC_CPPI_OWNERSHIP_BIT) == 0)) { The code would be easier to read if you just invert the 'if' above and return here. > + if (status & EMAC_CPPI_RX_ERROR_FRAME) { > + /* Error in packet - discard it and requeue desc */ > + dev_warn(priv->dev, "WARN: emac_rcv_pkt: Error in packet\n"); > + } else { > + pkt = (unsigned char *)readl(&rx_curr_desc->buffer); > + len = readl(&rx_curr_desc->buff_off_len) & 0xffff; > + dev_dbg(priv->dev, "| emac_recv got packet (length %i)\n", len); > + dma_inv_range((ulong)pkt, > + (ulong)rx_curr_desc->buffer + len); > + net_receive(pkt, len); > + ret = len; > + } > + > + /* Ack received packet descriptor */ > + writel(BD_TO_HW(rx_curr_desc), &priv->adap_emac->RX0CP); > + curr_desc = rx_curr_desc; > + priv->emac_rx_active_head = HW_TO_BD(readl(&rx_curr_desc->next)); > + > + if (status & EMAC_CPPI_EOQ_BIT) { > + if (priv->emac_rx_active_head) { > + writel(BD_TO_HW(priv->emac_rx_active_head), > + &priv->adap_emac->RX0HDP); > + } else { > + priv->emac_rx_queue_active = 0; > + dev_info(priv->dev, "INFO:emac_rcv_packet: RX Queue not active\n"); > + } > + } > + > + /* Recycle RX descriptor */ > + writel(EMAC_MAX_ETHERNET_PKT_SIZE, &rx_curr_desc->buff_off_len); > + writel(EMAC_CPPI_OWNERSHIP_BIT, &rx_curr_desc->pkt_flag_len); > + writel(0, &rx_curr_desc->next); > + > + if (priv->emac_rx_active_head == 0) { > + dev_info(priv->dev, "INFO: emac_rcv_pkt: active queue head = 0\n"); > + priv->emac_rx_active_head = curr_desc; > + priv->emac_rx_active_tail = curr_desc; > + if (priv->emac_rx_queue_active != 0) { > + writel(BD_TO_HW(priv->emac_rx_active_head), &priv->adap_emac->RX0HDP); > + dev_info(priv->dev, "INFO: emac_rcv_pkt: active queue head = 0, HDP fired\n"); > + priv->emac_rx_queue_active = 1; > + } > + } else { > + tail_desc = priv->emac_rx_active_tail; > + priv->emac_rx_active_tail = curr_desc; > + writel(BD_TO_HW(curr_desc), &tail_desc->next); > + status = readl(&tail_desc->pkt_flag_len); > + if (status & EMAC_CPPI_EOQ_BIT) { > + writel(BD_TO_HW(curr_desc), &priv->adap_emac->RX0HDP); > + status &= ~EMAC_CPPI_EOQ_BIT; > + writel(status, &tail_desc->pkt_flag_len); > + } > + } > + return ret; > + } > + > + dev_dbg(priv->dev, "- emac_recv\n"); > + > + return 0; > +} > + > +static int davinci_emac_probe(struct device_d *dev) > +{ > + struct davinci_emac_priv *priv; > + int i; > + > + dev_dbg(dev, "+ emac_probe\n"); > + > + priv = xzalloc(sizeof(*priv)); > + dev->priv = priv; > + > + priv->dev = dev; > + > + priv->adap_emac = (emac_regs *)EMAC_BASE_ADDR; > + priv->adap_ewrap = (ewrap_regs *)EMAC_WRAPPER_BASE_ADDR; > + priv->adap_mdio = (mdio_regs *)EMAC_MDIO_BASE_ADDR; > + > + /* EMAC descriptors */ > + priv->emac_rx_desc = (emac_desc *)(EMAC_WRAPPER_RAM_ADDR + EMAC_RX_DESC_BASE); > + priv->emac_tx_desc = (emac_desc *)(EMAC_WRAPPER_RAM_ADDR + EMAC_TX_DESC_BASE); > + priv->emac_rx_active_head = 0; > + priv->emac_rx_active_tail = 0; > + priv->emac_rx_queue_active = 0; > + > + /* Receive packet buffers */ > + priv->emac_rx_buffers = xmemalign(4096, EMAC_MAX_RX_BUFFERS * (EMAC_MAX_ETHERNET_PKT_SIZE + EMAC_PKT_ALIGN)); > + > + /* PHY address for a discovered PHY (0xff - not found) */ > + priv->active_phy_addr = 0xff; > + > + priv->edev.priv = priv; > + priv->edev.init = davinci_emac_init; > + priv->edev.open = davinci_emac_open; > + priv->edev.halt = davinci_emac_halt; > + priv->edev.send = davinci_emac_send; > + priv->edev.recv = davinci_emac_recv; > + priv->edev.get_ethaddr = davinci_emac_get_ethaddr; > + priv->edev.set_ethaddr = davinci_emac_set_ethaddr; > + priv->edev.parent = dev; > + > + priv->regs = dev_request_mem_region(dev, 0); > + > + davinci_eth_mdio_enable(priv); > + > + for (i = 0; i < 256; i++) { > + if (priv->adap_mdio->ALIVE) readl Also, use a regular is_timout() loop. > + break; > + udelay(1000); > + } > + > + if (i >= 256) { > + dev_err(dev, "No ETH PHY detected!\n"); > + } > + > + priv->miidev.read = davinci_miidev_read; > + priv->miidev.write = davinci_miidev_write; > + priv->miidev.address = 0x01; > + priv->miidev.flags = MIIDEV_FORCE_LINK; > + priv->miidev.edev = &priv->edev; > + priv->miidev.parent = dev; > + > + mii_register(&priv->miidev); > + > + eth_register(&priv->edev); > + > + dev_dbg(dev, "- emac_probe\n"); > + return 0; > +} > + > +static void davinci_emac_remove(struct device_d *dev) > +{ > + struct davinci_emac_priv *priv = dev->priv; > + > + davinci_emac_halt(&priv->edev); > +} > + > +static struct driver_d davinci_emac_driver = { > + .name = "davinci_emac", > + .probe = davinci_emac_probe, > + .remove = davinci_emac_remove, > +}; > + > +static int davinci_emac_register(void) > +{ > + register_driver(&davinci_emac_driver); > + return 0; > +} > + > +device_initcall(davinci_emac_register); > diff --git a/drivers/net/davinci_emac.h b/drivers/net/davinci_emac.h > new file mode 100644 > index 0000000..4e97ce5 > --- /dev/null > +++ b/drivers/net/davinci_emac.h > @@ -0,0 +1,331 @@ > +/* > + * Copyright (C) 2007 Sergey Kubushyn > + * > + * Based on: > + * > + * ---------------------------------------------------------------------------- > + * > + * dm644x_emac.h > + * > + * TI DaVinci (DM644X) EMAC peripheral driver header for DV-EVM > + * > + * Copyright (C) 2005 Texas Instruments. > + * > + * ---------------------------------------------------------------------------- > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; either version 2 of the License, or > + * (at your option) any later version. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program; if not, write to the Free Software > + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. > + * ---------------------------------------------------------------------------- > + > + * Modifications: > + * ver. 1.0: Sep 2005, TI PSP Team - Created EMAC version for uBoot. > + * > + */ > + > +#ifndef _DAVINCI_EMAC_H_ > +#define _DAVINCI_EMAC_H_ > + > +/* PHY mask - set only those phy number bits where phy is/can be connected */ > +#define EMAC_MDIO_PHY_NUM 1 > +#define EMAC_MDIO_PHY_MASK (1 << EMAC_MDIO_PHY_NUM) > + > +/* Ethernet Min/Max packet size */ > +#define EMAC_MIN_ETHERNET_PKT_SIZE 60 > +#define EMAC_MAX_ETHERNET_PKT_SIZE 1518 > +#define EMAC_PKT_ALIGN 18 /* 1518 + 18 = 1536 (packet aligned on 32 byte boundry) */ > + > +/* Number of RX packet buffers > + * NOTE: Only 1 buffer supported as of now > + */ > +#define EMAC_MAX_RX_BUFFERS 10 > + > +typedef unsigned int dv_reg; > +typedef unsigned int *dv_reg_p; > + > +/*********************************************** > + ******** Internally used macros *************** > + ***********************************************/ > + > +#define EMAC_CH_TX 1 > +#define EMAC_CH_RX 0 > + > +/* Each descriptor occupies 4 words, lets start RX desc's at 0 and > + * reserve space for 64 descriptors max > + */ > +#define EMAC_RX_DESC_BASE 0x0 > +#define EMAC_TX_DESC_BASE 0x1000 > + > +/* EMAC Teardown value */ > +#define EMAC_TEARDOWN_VALUE 0xfffffffc > + > +/* MII Status Register */ > +#define MII_STATUS_REG 1 > + > +/* Number of statistics registers */ > +#define EMAC_NUM_STATS 36 > + > + > +/* EMAC Descriptor */ > +typedef struct > +{ > + u_int32_t next; /* Pointer to next descriptor in chain */ > + u_int8_t *buffer; /* Pointer to data buffer */ > + u_int32_t buff_off_len; /* Buffer Offset(MSW) and Length(LSW) */ > + u_int32_t pkt_flag_len; /* Packet Flags(MSW) and Length(LSW) */ > +} emac_desc; > + > +/* CPPI bit positions */ > +#define EMAC_CPPI_SOP_BIT (0x80000000) > +#define EMAC_CPPI_EOP_BIT (0x40000000) > +#define EMAC_CPPI_OWNERSHIP_BIT (0x20000000) > +#define EMAC_CPPI_EOQ_BIT (0x10000000) > +#define EMAC_CPPI_TEARDOWN_COMPLETE_BIT (0x08000000) > +#define EMAC_CPPI_PASS_CRC_BIT (0x04000000) > + > +#define EMAC_CPPI_RX_ERROR_FRAME (0x03fc0000) > + > +#define EMAC_MACCONTROL_MIIEN_ENABLE (0x20) > +#define EMAC_MACCONTROL_FULLDUPLEX_ENABLE (0x1) > +#define EMAC_MACCONTROL_GIGABIT_ENABLE (1 << 7) > +#define EMAC_MACCONTROL_GIGFORCE (1 << 17) > +#define EMAC_MACCONTROL_RMIISPEED_100 (1 << 15) > + > +#define EMAC_MAC_ADDR_MATCH (1 << 19) > +#define EMAC_MAC_ADDR_IS_VALID (1 << 20) > + > +#define EMAC_RXMBPENABLE_RXCAFEN_ENABLE (0x200000) > +#define EMAC_RXMBPENABLE_RXBROADEN (0x2000) > + > + > +#define MDIO_CONTROL_IDLE (0x80000000) > +#define MDIO_CONTROL_ENABLE (0x40000000) > +#define MDIO_CONTROL_FAULT_ENABLE (0x40000) > +#define MDIO_CONTROL_FAULT (0x80000) > +#define MDIO_USERACCESS0_GO (0x80000000) > +#define MDIO_USERACCESS0_WRITE_READ (0x0) > +#define MDIO_USERACCESS0_WRITE_WRITE (0x40000000) > +#define MDIO_USERACCESS0_ACK (0x20000000) > + > +/* Ethernet MAC Registers Structure */ > +typedef struct { No typedef for structs please. > + dv_reg TXIDVER; Or better, no typedefs at all ;) Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox