From: Sascha Hauer <s.hauer@pengutronix.de>
To: barebox@lists.infradead.org
Subject: v2012.09.0
Date: Wed, 5 Sep 2012 15:51:18 +0200 [thread overview]
Message-ID: <20120905135118.GH26594@pengutronix.de> (raw)
Got it. We have a september release. Thank you all for working on
barebox and making this bootloader better.
Have fun!
Sascha
----------------------------------------------------------------
Alexander Shiyan (7):
PCM970: Add MMC support
PCM038: Read UID from fuses and pass this value to kernel as serial number
mc13xxx: Define maximum SPI clock frequency global to driver
tx51: Unused mc13xxx.h include removed
mc13xxx: Added dummy definitions if CONFIG_MFD_MC13XXX is not set
PCM038: Added setup for OTG host pins
i.MX: Removed unused declaration for imx_iim_get_mac
Alexey Galakhov (2):
S5P DRAM support
Add FriendlyArm Tiny210 board (S5PV210)
Antony Pavlov (6):
MIPS: malta: register memory bank
MIPS: remove unused processor-specific constants and macros
serial_ns16550: change the driver's name
MIPS: add initial exceptions handling
commands: memset: fix help message
commands/digest: don't print checksum for non-existing files
Bernhard Walle (1):
lib/Kconfig: Fix alignment of arrows in label
Christian Kapeller (2):
input: Add i.MX matrix keypad driver
input: add i.MX51 platform code for matrix keypad driver
Eric Bénard (6):
string: add strim for ONFI code
nand_base: add ONFI flash detection
nand_imx: update to support onfi & 4k flashs
eukrea_cpuimx35: fix USB host
m25p80: wait for flash before returning after erase
stringlist: fix division by zero
Jan Luebbe (1):
scripts/mkublheader: add program to produce an UBL image header
Jan Weitzel (1):
gpmc: Add reset to gpmc_generic_init
Jean-Christophe PLAGNIOL-VILLARD (8):
stddev: make it selectable via Kconfig
kbuild: Init all relevant variables used in kbuild files
decompress_unlzo: define decompress_unlzo as decompress
arm/bootm: fix initrd_start init
bootm: do not load the initrd in the common code
uimage_sdram_flush: fix resource start
uimage_laod: fix ramdisk support
nhk8815: fix nand IO_DATA end resource
Juergen Beisert (23):
Enable a way to provide the reason for "being here"
ARM/Samsung: add support to detect the reset source
ARM/i.MX: add support to detect the reset source
ARM/MXS: add reset cause detection
ARM/Samsung: add the vendor FriendlyARM to the board's directory name
ARM/Samsung: List only really supported S3C24xx SoCs
ARM/Samsung: follow the name style of the other source files in this directory
Samsung/serial: remove more ugly ifdef lines
Samsung/serial: make the code more readable
Samsung/serial: there is no need to ifdef these register defines
Samsung/serial: there is no need to ifdef the slot table
Samsung/serial: move the decision about an improved UART into Kconfig
Samsung/serial: unify UCON register settings
Samsung/serial: make the clock source configureable
ARM/Samsung: add S3C6410 SoC iomap
ARM/Samsung: adapt the generic timer driver to support the S3C6410 SoC
ARM/Samsung: add the clock tree support for the S3C6410 SoC
ARM/Samsung: add GPIO handling support for the S3C6410 SoC
ARM/Samsung: add generic S3C6410 SoC specific functions
ARM/Samsung: add the S3C6410 SoC
ARM/Samsung: add the Mini6410 platform as a user of the S3C6410 SoC
ARM/Samsung: add the Tiny6410 platform as a user of the S3C6410 SoC
serial Samsung: add the S3C64xx requirements
Juergen Kilb (3):
Added SDR-size auto detection.
pca-a-l1: added memory device for int. 60kB RAM.
phyCARD-A-L1: Create xload configuration.
Marc Kleine-Budde (1):
usb: gadget: enable for MXS
Marc Reilly (2):
imx35: mmc clock has 6 bit divider, not 3_3
i2c: add platform_data for i2c_board_info
Maxime Ripard (2):
Add bootargs script to boot on ext filesystems
Add support for the Crystalfontz CFA-10036 board
Sascha Hauer (82):
ARM tqma53: Add standard flash header
ARM tqma53: switch to new environment
hush getopt: shift argv arguments
defenv-2: Add usage information for bootargs scripts
defenv-2: improve boot script
lzo: Allow for static inlining
ARM lds: remove unused got
ARM: remove board linker script option
ARM: remove exception vectors from boards
ARM startup: calculate offset instead of runtime address
ARM ep93xx: Get rid of special handling in linker file
ARM boards: Use _text rather than TEXT_BASE
ARM: Separate assembler functions into their own section
ARM at91rm9200: remove SoC specific copying of exception vectors
ARM: move exception vector table to exceptions.S
kconfig: fix IS_ENABLED to not require all options to be defined
USB: Fix typo tranceiver -> transceiver
ARM: let armlinux_set_* depend on the correct option
bootm: Fix undefined reference to of_fix_tree
uimage: introduce UIMAGE Kconfig symbol
ARM at91rm9200: Add missing include
Add missing semicolons at end of EXPORT_SYMBOL
exec command: Fix compilation
input gpio buttons: needs poller API
loadb: fix compilation
mfd TWL4030: Fix Kconfig dependencies
pwm PXA: Compile only on PXA
fs nfs: depend on net
mtd nand: Fix compilation without bbt support
led: remove gpio include
ARM Samsung S5P: Disable support until we have a board
gpio: add static inlines for gpio_request/gpio_free
ARM: remove mx1ads leftovers
usb gadget at91: Use correct include
usb gadget: Enable gadget support only when a driver is available
ARM i.MX: rename internal-nand-boot.c to external-nand-boot.c
ARM i.MX: No external NAND boot on i.MX1
mtd: remove dead disk-on-chip support
mtd omap: add prefix to omap specific decode_bch function
ARM at91: remove const
ARM at91: fix typo in define
uimage: select uncompress and crc32 support
I2C i.MX: disable driver for i.MX1
mtd: scan_write_bbt is only needed with mtd write support
UBI: select crc32 support
nor m25p80: remove progression bar
nor m25p80: remove unused variables
nor m25p80: refactor chip erase
nor m25p80: align start and end to erase blocks
nor m25p80: optimize erase
nor m25p80: implement fast read
SPI i.MX: Add support for i.MX6
ARM i.MX: Add support for internal serial boot mode
ARM i.MX: Add support for the Freescale i.MX6 sabrelite board
ARM i.MX: Add defconfig for Freescale i.MX6 Sabre Lite board
ubi: cdev->write has to return the bytes read, not 0
ubi: align ubi writes to LEB size
Merge branch 'for-next/cfa-10036'
Merge branch 'for-next/compressed-prepare'
Merge branch 'for-next/defenv-2'
Merge branch 'for-next/depend'
Merge branch 'for-next/friendlyarm'
Merge branch 'for-next/i2c'
Merge branch 'for-next/imx-keypad'
Merge branch 'for-next/imx-misc'
Merge branch 'for-next/m25p80'
Merge branch 'for-next/mips'
Merge branch 'for-next/misc'
Merge branch 'for-next/mkublheader'
Merge branch 'for-next/omap'
Merge branch 'for-next/onfi'
Merge branch 'for-next/pcm038'
Merge branch 'for-next/randconfig'
Merge branch 'for-next/reset-source'
Merge branch 'for-next/sabrelite'
Merge branch 'for-next/samsung'
Merge branch 'for-next/tqma53'
Merge branch 'for-next/ubi'
qsort: Fix wrong check
glob: fix GLOB_SORT
Merge tag 'bootm_fix' of git://git.jcrosoft.org/barebox
Release v2012.09.0
Steffen Trumtrar (2):
trivial: fix spelling in usb code
trivial: bootm: correct grammar in error message
Teresa Gámez (2):
OMAP4: small header cleanup
defaultenv-2: Add bootargs for booting from disk
Wolfram Sang (1):
arm: mxs: bcb: fix usage of second bootstream
.gitignore | 1 +
Makefile | 2 +-
arch/arm/Kconfig | 30 +-
arch/arm/Makefile | 20 +-
arch/arm/boards/a9m2410/a9m2410.c | 3 +-
arch/arm/boards/a9m2440/a9m2440.c | 3 +-
arch/arm/boards/ccxmx51/ccxmx51.c | 1 -
arch/arm/boards/crystalfontz-cfa10036/Makefile | 1 +
arch/arm/boards/crystalfontz-cfa10036/cfa10036.c | 106 ++
arch/arm/boards/crystalfontz-cfa10036/config.h | 16 +
.../boards/crystalfontz-cfa10036/env/boot/mmc-ext3 | 10 +
.../crystalfontz-cfa10036/env/init/automount | 9 +
.../crystalfontz-cfa10036/env/init/bootargs-base | 8 +
.../boards/crystalfontz-cfa10036/env/init/general | 12 +
.../boards/crystalfontz-cfa10036/env/init/hostname | 8 +
arch/arm/boards/eukrea_cpuimx25/eukrea_cpuimx25.c | 7 +-
arch/arm/boards/eukrea_cpuimx25/lowlevel.c | 4 +-
arch/arm/boards/eukrea_cpuimx27/eukrea_cpuimx27.c | 4 +-
arch/arm/boards/eukrea_cpuimx27/lowlevel_init.S | 11 +-
arch/arm/boards/eukrea_cpuimx35/eukrea_cpuimx35.c | 2 +-
arch/arm/boards/eukrea_cpuimx35/flash_header.c | 2 -
arch/arm/boards/eukrea_cpuimx35/lowlevel.c | 4 +-
arch/arm/boards/freescale-mx25-3-stack/3stack.c | 8 +-
.../boards/freescale-mx25-3-stack/lowlevel_init.S | 11 +-
arch/arm/boards/freescale-mx35-3-stack/3stack.c | 4 +-
.../boards/freescale-mx35-3-stack/flash_header.c | 4 +-
.../boards/freescale-mx35-3-stack/lowlevel_init.S | 11 +-
arch/arm/boards/freescale-mx51-pdk/board.c | 1 -
arch/arm/boards/freescale-mx53-loco/flash_header.c | 2 +-
arch/arm/boards/freescale-mx53-smd/flash_header.c | 2 +-
arch/arm/boards/freescale-mx6-arm2/flash_header.c | 5 +-
arch/arm/boards/freescale-mx6-sabrelite/Makefile | 1 +
arch/arm/boards/freescale-mx6-sabrelite/board.c | 265 +++
arch/arm/boards/freescale-mx6-sabrelite/config.h | 4 +
.../freescale-mx6-sabrelite/env/init/bootargs-base | 8 +
.../freescale-mx6-sabrelite/env/init/hostname | 8 +
.../boards/freescale-mx6-sabrelite/flash_header.c | 178 ++
.../{mini2440 => friendlyarm-mini2440}/Kconfig | 0
.../{mini2440 => friendlyarm-mini2440}/Makefile | 0
.../{mini2440 => friendlyarm-mini2440}/config.h | 0
.../{mini2440 => friendlyarm-mini2440}/env/config | 0
.../lowlevel_init.S | 0
.../{mini2440 => friendlyarm-mini2440}/mini2440.c | 3 +-
arch/arm/boards/friendlyarm-mini6410/Makefile | 1 +
arch/arm/boards/friendlyarm-mini6410/config.h | 8 +
arch/arm/boards/friendlyarm-mini6410/env/config | 56 +
arch/arm/boards/friendlyarm-mini6410/mini6410.c | 305 ++++
arch/arm/boards/friendlyarm-tiny210/Makefile | 1 +
arch/arm/boards/friendlyarm-tiny210/config.h | 19 +
arch/arm/boards/friendlyarm-tiny210/lowlevel.c | 72 +
arch/arm/boards/friendlyarm-tiny210/tiny210.c | 113 ++
arch/arm/boards/friendlyarm-tiny6410/Kconfig | 19 +
arch/arm/boards/friendlyarm-tiny6410/Makefile | 3 +
arch/arm/boards/friendlyarm-tiny6410/config.h | 8 +
.../friendlyarm-tiny6410/development-board.c | 99 ++
arch/arm/boards/friendlyarm-tiny6410/env/config | 56 +
arch/arm/boards/friendlyarm-tiny6410/tiny6410.c | 80 +
arch/arm/boards/friendlyarm-tiny6410/tiny6410.h | 14 +
arch/arm/boards/guf-cupid/lowlevel.c | 4 +-
arch/arm/boards/guf-neso/lowlevel.c | 4 +-
arch/arm/boards/imx21ads/imx21ads.c | 4 +-
arch/arm/boards/imx21ads/lowlevel_init.S | 10 +-
arch/arm/boards/karo-tx25/board.c | 3 +-
arch/arm/boards/karo-tx25/lowlevel.c | 4 +-
arch/arm/boards/karo-tx51/flash_header.c | 2 +-
arch/arm/boards/karo-tx51/tx51.c | 1 -
arch/arm/boards/nhk8815/setup.c | 2 +-
arch/arm/boards/pcm037/lowlevel_init.S | 7 +-
arch/arm/boards/pcm037/pcm037.c | 4 +-
arch/arm/boards/pcm038/lowlevel.c | 4 +-
arch/arm/boards/pcm038/pcm038.c | 36 +-
arch/arm/boards/pcm038/pcm970.c | 24 +
arch/arm/boards/pcm043/lowlevel.c | 4 +-
arch/arm/boards/phycard-a-l1/pca-a-l1.c | 181 +-
arch/arm/boards/phycard-i.MX27/lowlevel_init.S | 8 +-
arch/arm/boards/phycard-i.MX27/pca100.c | 2 +-
arch/arm/boards/tqma53/env/config | 43 -
arch/arm/boards/tqma53/env/init/bootargs-base | 8 +
arch/arm/boards/tqma53/env/init/hostname | 8 +
arch/arm/boards/tqma53/flash_header.c | 5 +-
arch/arm/configs/cfa10036_defconfig | 42 +
arch/arm/configs/freescale-mx6-sabrelite_defconfig | 71 +
...40_defconfig => friendlyarm_mini2440_defconfig} | 2 +-
arch/arm/configs/friendlyarm_mini6410_defconfig | 40 +
arch/arm/configs/friendlyarm_tiny210_defconfig | 17 +
arch/arm/configs/friendlyarm_tiny6410_defconfig | 41 +
arch/arm/configs/phycard_a_l1_xload_defconfig | 43 +
arch/arm/configs/tqma53_defconfig | 14 +-
arch/arm/cpu/cache-armv4.S | 7 +-
arch/arm/cpu/cache-armv5.S | 7 +-
arch/arm/cpu/cache-armv6.S | 11 +-
arch/arm/cpu/cache-armv7.S | 8 +-
arch/arm/cpu/exceptions.S | 28 +-
arch/arm/cpu/start.c | 37 +-
arch/arm/include/asm/armlinux.h | 3 +-
arch/arm/lib/Makefile | 3 +-
arch/arm/lib/ashldi3.S | 1 +
arch/arm/lib/ashrdi3.S | 1 +
arch/arm/lib/barebox.lds.S | 8 -
arch/arm/lib/bootm.c | 6 +-
arch/arm/lib/io-writesw-armv4.S | 2 +
arch/arm/lib/lib1funcs.S | 7 +
arch/arm/lib/lshrdi3.S | 1 +
arch/arm/mach-at91/Kconfig | 1 -
arch/arm/mach-at91/at91rm9200_devices.c | 3 +-
arch/arm/mach-at91/at91rm9200_lowlevel_init.c | 18 -
arch/arm/mach-at91/at91sam9261_devices.c | 6 +-
arch/arm/mach-at91/include/mach/gpio.h | 9 -
arch/arm/mach-ep93xx/Makefile | 2 +-
arch/arm/mach-ep93xx/header.c | 8 +
arch/arm/mach-ep93xx/include/mach/barebox.lds.h | 9 +
arch/arm/mach-imx/Kconfig | 24 +-
arch/arm/mach-imx/Makefile | 3 +-
arch/arm/mach-imx/devices.c | 5 +
.../{internal-nand-boot.c => external-nand-boot.c} | 0
arch/arm/mach-imx/include/mach/barebox.lds.h | 12 +-
arch/arm/mach-imx/include/mach/devices-imx51.h | 4 +
arch/arm/mach-imx/include/mach/devices-imx6.h | 5 +
arch/arm/mach-imx/include/mach/devices.h | 2 +
arch/arm/mach-imx/include/mach/iim.h | 1 -
arch/arm/mach-imx/include/mach/imx-flash-header.h | 9 +
arch/arm/mach-imx/reset_source.c | 72 +
arch/arm/mach-imx/speed-imx35.c | 8 +-
arch/arm/mach-imx/speed-imx51.c | 5 +
arch/arm/mach-imx/speed-imx53.c | 5 +
arch/arm/mach-imx/speed-imx6.c | 5 +
arch/arm/mach-mxs/Kconfig | 8 +
arch/arm/mach-mxs/bcb.c | 2 +-
arch/arm/mach-omap/Kconfig | 1 +
arch/arm/mach-omap/gpmc.c | 12 +-
arch/arm/mach-omap/include/mach/clocks.h | 3 +
arch/arm/mach-omap/include/mach/omap3-silicon.h | 1 +
arch/arm/mach-omap/omap4_clock.c | 4 +-
arch/arm/mach-omap/omap4_generic.c | 5 +-
arch/arm/mach-samsung/Kconfig | 62 +-
arch/arm/mach-samsung/Makefile | 6 +-
.../{s3c24xx-clocks.c => clocks-s3c24xx.c} | 0
arch/arm/mach-samsung/clocks-s3c64xx.c | 338 ++++
arch/arm/mach-samsung/gpio-s3c64xx.c | 301 ++++
.../mach-samsung/include/mach/devices-s3c64xx.h | 40 +
arch/arm/mach-samsung/include/mach/gpio.h | 3 +
arch/arm/mach-samsung/include/mach/iomux-s3c64xx.h | 542 ++++++
arch/arm/mach-samsung/include/mach/s3c-clocks.h | 3 +
arch/arm/mach-samsung/include/mach/s3c-generic.h | 23 +
arch/arm/mach-samsung/include/mach/s3c-iomap.h | 3 +
.../arm/mach-samsung/include/mach/s3c64xx-clocks.h | 67 +
arch/arm/mach-samsung/include/mach/s3c64xx-iomap.h | 51 +
arch/arm/mach-samsung/include/mach/s5pcxx-iomap.h | 5 +-
arch/arm/mach-samsung/mem-s3c64xx.c | 66 +
arch/arm/mach-samsung/mem-s5pcxx.c | 320 ++++
arch/arm/mach-samsung/reset_source.c | 56 +
arch/arm/mach-samsung/s3c-timer.c | 16 +-
arch/mips/boards/qemu-malta/init.c | 9 +
arch/mips/boot/main_entry.c | 47 +
arch/mips/include/asm/addrspace.h | 109 ++
arch/mips/include/asm/asm.h | 8 -
arch/mips/include/asm/mipsregs.h | 32 -
arch/mips/lib/Makefile | 2 +
arch/mips/lib/genex.S | 31 +
arch/mips/lib/traps.c | 107 ++
commands/Kconfig | 2 +
commands/Makefile | 2 +-
commands/bootm.c | 10 +-
commands/digest.c | 12 +-
commands/exec.c | 4 +-
commands/loadb.c | 4 +-
commands/mem.c | 5 +-
commands/usb.c | 2 +-
common/Kconfig | 19 +
common/Makefile | 5 +-
common/hush.c | 5 +-
common/reset_source.c | 44 +
common/uimage.c | 6 +-
defaultenv-2/base/bin/boot | 42 +-
defaultenv-2/base/bin/bootargs-root-disk | 26 +
defaultenv-2/base/bin/bootargs-root-ext | 12 +
defaultenv-2/base/bin/bootargs-root-initrd | 7 +-
defaultenv-2/base/bin/bootargs-root-jffs2 | 14 +-
defaultenv-2/base/bin/bootargs-root-nfs | 7 +-
defaultenv-2/base/bin/bootargs-root-ubi | 13 +-
drivers/i2c/busses/Kconfig | 2 +-
drivers/i2c/i2c.c | 1 +
drivers/input/Kconfig | 14 +
drivers/input/Makefile | 1 +
drivers/input/imx_keypad.c | 463 +++++
drivers/led/core.c | 1 -
drivers/mfd/Kconfig | 1 -
drivers/mfd/mc13xxx.c | 1 +
drivers/mfd/mc34704.c | 4 +-
drivers/mfd/mc9sdz60.c | 4 +-
drivers/mtd/nand/Kconfig | 32 -
drivers/mtd/nand/Makefile | 1 -
drivers/mtd/nand/diskonchip.c | 1787 --------------------
drivers/mtd/nand/nand_base.c | 174 +-
drivers/mtd/nand/nand_bbt.c | 2 +
drivers/mtd/nand/nand_imx.c | 98 +-
drivers/mtd/nand/nand_omap_bch_decoder.c | 2 +-
drivers/mtd/nand/nand_omap_gpmc.c | 4 +-
drivers/mtd/nand/nand_write.c | 5 +-
drivers/mtd/ubi/Kconfig | 1 +
drivers/mtd/ubi/cdev.c | 35 +-
drivers/nor/m25p80.c | 77 +-
drivers/nor/m25p80.h | 12 +-
drivers/pwm/Kconfig | 1 +
drivers/serial/Kconfig | 4 +
drivers/serial/serial_ns16550.c | 2 +-
drivers/serial/serial_s3c.c | 74 +-
drivers/spi/Kconfig | 2 +-
drivers/spi/imx_spi.c | 6 +-
drivers/usb/core/usb.c | 4 +-
drivers/usb/gadget/Kconfig | 7 +-
drivers/usb/gadget/at91_udc.c | 3 +-
drivers/usb/otg/Kconfig | 7 +-
drivers/watchdog/im28wd.c | 25 +
fs/Kconfig | 1 +
include/asm-generic/barebox.lds.h | 3 +-
include/driver.h | 2 +-
include/gpio.h | 13 +
include/i2c/i2c.h | 1 +
include/linux/kconfig.h | 20 +-
include/linux/mtd/mtd-abi.h | 7 +-
include/linux/mtd/nand.h | 74 +-
include/linux/string.h | 3 +
include/lzo.h | 8 +-
include/matrix_keypad.h | 59 +
include/mfd/mc13xxx.h | 23 +-
include/reset_source.h | 27 +
lib/Kconfig | 2 +-
lib/decompress_unlzo.c | 10 +-
lib/glob.c | 4 +-
lib/lzo/lzo1x_decompress.c | 2 +-
lib/qsort.c | 2 +-
lib/string.c | 39 +
lib/stringlist.c | 4 +-
scripts/.gitignore | 5 +-
scripts/Makefile | 1 +
scripts/Makefile.build | 25 +-
scripts/mkublheader.c | 99 ++
238 files changed, 6042 insertions(+), 2390 deletions(-)
create mode 100644 arch/arm/boards/crystalfontz-cfa10036/Makefile
create mode 100644 arch/arm/boards/crystalfontz-cfa10036/cfa10036.c
create mode 100644 arch/arm/boards/crystalfontz-cfa10036/config.h
create mode 100644 arch/arm/boards/crystalfontz-cfa10036/env/boot/mmc-ext3
create mode 100644 arch/arm/boards/crystalfontz-cfa10036/env/init/automount
create mode 100644 arch/arm/boards/crystalfontz-cfa10036/env/init/bootargs-base
create mode 100644 arch/arm/boards/crystalfontz-cfa10036/env/init/general
create mode 100644 arch/arm/boards/crystalfontz-cfa10036/env/init/hostname
create mode 100644 arch/arm/boards/freescale-mx6-sabrelite/Makefile
create mode 100644 arch/arm/boards/freescale-mx6-sabrelite/board.c
create mode 100644 arch/arm/boards/freescale-mx6-sabrelite/config.h
create mode 100644 arch/arm/boards/freescale-mx6-sabrelite/env/init/bootargs-base
create mode 100644 arch/arm/boards/freescale-mx6-sabrelite/env/init/hostname
create mode 100644 arch/arm/boards/freescale-mx6-sabrelite/flash_header.c
rename arch/arm/boards/{mini2440 => friendlyarm-mini2440}/Kconfig (100%)
rename arch/arm/boards/{mini2440 => friendlyarm-mini2440}/Makefile (100%)
rename arch/arm/boards/{mini2440 => friendlyarm-mini2440}/config.h (100%)
rename arch/arm/boards/{mini2440 => friendlyarm-mini2440}/env/config (100%)
rename arch/arm/boards/{mini2440 => friendlyarm-mini2440}/lowlevel_init.S (100%)
rename arch/arm/boards/{mini2440 => friendlyarm-mini2440}/mini2440.c (99%)
create mode 100644 arch/arm/boards/friendlyarm-mini6410/Makefile
create mode 100644 arch/arm/boards/friendlyarm-mini6410/config.h
create mode 100644 arch/arm/boards/friendlyarm-mini6410/env/config
create mode 100644 arch/arm/boards/friendlyarm-mini6410/mini6410.c
create mode 100644 arch/arm/boards/friendlyarm-tiny210/Makefile
create mode 100644 arch/arm/boards/friendlyarm-tiny210/config.h
create mode 100644 arch/arm/boards/friendlyarm-tiny210/lowlevel.c
create mode 100644 arch/arm/boards/friendlyarm-tiny210/tiny210.c
create mode 100644 arch/arm/boards/friendlyarm-tiny6410/Kconfig
create mode 100644 arch/arm/boards/friendlyarm-tiny6410/Makefile
create mode 100644 arch/arm/boards/friendlyarm-tiny6410/config.h
create mode 100644 arch/arm/boards/friendlyarm-tiny6410/development-board.c
create mode 100644 arch/arm/boards/friendlyarm-tiny6410/env/config
create mode 100644 arch/arm/boards/friendlyarm-tiny6410/tiny6410.c
create mode 100644 arch/arm/boards/friendlyarm-tiny6410/tiny6410.h
delete mode 100644 arch/arm/boards/tqma53/env/config
create mode 100644 arch/arm/boards/tqma53/env/init/bootargs-base
create mode 100644 arch/arm/boards/tqma53/env/init/hostname
create mode 100644 arch/arm/configs/cfa10036_defconfig
create mode 100644 arch/arm/configs/freescale-mx6-sabrelite_defconfig
rename arch/arm/configs/{mini2440_defconfig => friendlyarm_mini2440_defconfig} (92%)
create mode 100644 arch/arm/configs/friendlyarm_mini6410_defconfig
create mode 100644 arch/arm/configs/friendlyarm_tiny210_defconfig
create mode 100644 arch/arm/configs/friendlyarm_tiny6410_defconfig
create mode 100644 arch/arm/configs/phycard_a_l1_xload_defconfig
create mode 100644 arch/arm/mach-ep93xx/header.c
create mode 100644 arch/arm/mach-ep93xx/include/mach/barebox.lds.h
rename arch/arm/mach-imx/{internal-nand-boot.c => external-nand-boot.c} (100%)
create mode 100644 arch/arm/mach-imx/reset_source.c
rename arch/arm/mach-samsung/{s3c24xx-clocks.c => clocks-s3c24xx.c} (100%)
create mode 100644 arch/arm/mach-samsung/clocks-s3c64xx.c
create mode 100644 arch/arm/mach-samsung/gpio-s3c64xx.c
create mode 100644 arch/arm/mach-samsung/include/mach/devices-s3c64xx.h
create mode 100644 arch/arm/mach-samsung/include/mach/iomux-s3c64xx.h
create mode 100644 arch/arm/mach-samsung/include/mach/s3c64xx-clocks.h
create mode 100644 arch/arm/mach-samsung/include/mach/s3c64xx-iomap.h
create mode 100644 arch/arm/mach-samsung/mem-s3c64xx.c
create mode 100644 arch/arm/mach-samsung/mem-s5pcxx.c
create mode 100644 arch/arm/mach-samsung/reset_source.c
create mode 100644 arch/mips/include/asm/addrspace.h
create mode 100644 arch/mips/lib/genex.S
create mode 100644 arch/mips/lib/traps.c
create mode 100644 common/reset_source.c
create mode 100644 defaultenv-2/base/bin/bootargs-root-disk
create mode 100644 defaultenv-2/base/bin/bootargs-root-ext
create mode 100644 drivers/input/imx_keypad.c
delete mode 100644 drivers/mtd/nand/diskonchip.c
create mode 100644 include/matrix_keypad.h
create mode 100644 include/reset_source.h
create mode 100644 scripts/mkublheader.c
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
reply other threads:[~2012-09-05 13:51 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120905135118.GH26594@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox