From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: barebox@lists.infradead.org
Subject: [PATCH 0/1 v5] net: introduce phylib
Date: Mon, 17 Sep 2012 07:43:32 +0200 [thread overview]
Message-ID: <20120917054332.GO25990@game.jcrosoft.org> (raw)
HI,
v5:
- drop edev in mii_device
v4:
- move phy_dev attachement to eth_device instead of mii_device
this will allow multiple phy_device per mii bus
- move phy cdev to phy_device
- add interface type support (so phy driver can configure themselves
if MII/RMII/RGMII etc...
- manage link status at framework level
- mx6 update to fixup the phy at device opening
v3:
- fix comment
- add phy_driver probe and remove
- renambe phydev.h to phy.h and phylib.c to phy.c as in linux
please pull
The following changes since commit 0b3c3e77945243c262f9ff1275479e6d8ea1d5c3:
net: catch error on eth_send (2012-09-16 20:39:07 +0800)
are available in the git repository at:
git://git.jcrosoft.org/barebox.git tags/net_phylib
for you to fetch changes up to bb8f85c7aac0c3354ab374d2df110d3df84a395f:
net: introduce phylib (2012-09-17 13:41:27 +0800)
----------------------------------------------------------------
net: check error and introduce phylib
Adapt phylib from linux
This will allow to have
- phy drivers
- to only connect the phy at then opening of the device
- if the phy is not ready or down fail on open
Same behaviour as in linux and will allow to share code and simplify porting.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
----------------------------------------------------------------
Jean-Christophe PLAGNIOL-VILLARD (1):
net: introduce phylib
arch/arm/boards/freescale-mx6-arm2/board.c | 41 ++++-----
arch/arm/boards/freescale-mx6-sabrelite/board.c | 38 +++------
drivers/net/Kconfig | 2 +
drivers/net/Makefile | 2 +-
drivers/net/altera_tse.c | 27 +++---
drivers/net/altera_tse.h | 1 +
drivers/net/at91_ether.c | 32 ++++---
drivers/net/designware.c | 45 +++++-----
drivers/net/dm9k.c | 23 ++---
drivers/net/ep93xx.c | 14 ++-
drivers/net/fec_imx.c | 72 ++++++++++------
drivers/net/fec_imx.h | 4 +
drivers/net/fec_mpc5200.c | 34 +++++---
drivers/net/fec_mpc5200.h | 2 +
drivers/net/gianfar.c | 46 +++++-----
drivers/net/ks8851_mll.c | 21 ++---
drivers/net/macb.c | 64 ++++++++------
drivers/net/miidev.c | 250 +----------------------------------------------------
drivers/net/netx_eth.c | 9 +-
drivers/net/phy/Kconfig | 17 ++++
drivers/net/phy/Makefile | 2 +
drivers/net/phy/generic.c | 36 ++++++++
drivers/net/phy/phy.c | 687 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
drivers/net/smc91111.c | 30 +++----
drivers/net/smc911x.c | 20 ++---
drivers/net/usb/asix.c | 11 +--
drivers/net/usb/smsc95xx.c | 11 +--
drivers/net/usb/usbnet.c | 11 +--
include/fec.h | 3 +
include/linux/ethtool.h | 114 +++++++++++++++++++++++++
include/linux/mii.h | 421 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-----------------------
include/linux/phy.h | 206 ++++++++++++++++++++++++++++++++++++++++++++
include/miidev.h | 21 +----
include/net.h | 4 +
include/usb/usbnet.h | 1 +
net/eth.c | 6 +-
36 files changed, 1673 insertions(+), 655 deletions(-)
create mode 100644 drivers/net/phy/Kconfig
create mode 100644 drivers/net/phy/Makefile
create mode 100644 drivers/net/phy/generic.c
create mode 100644 drivers/net/phy/phy.c
create mode 100644 include/linux/ethtool.h
create mode 100644 include/linux/phy.h
Best Regards,
J.
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2012-09-17 5:46 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-09-17 5:43 Jean-Christophe PLAGNIOL-VILLARD [this message]
2012-09-17 5:59 ` [PATCH 1/1] " Jean-Christophe PLAGNIOL-VILLARD
2012-09-17 14:13 ` Sascha Hauer
2012-09-17 14:26 ` Jean-Christophe PLAGNIOL-VILLARD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120917054332.GO25990@game.jcrosoft.org \
--to=plagnioj@jcrosoft.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox