mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: barebox@lists.infradead.org
Subject: Re: [for master PATCH 1/2] miidev: add phy_addr detection support
Date: Tue, 2 Oct 2012 15:23:57 +0200	[thread overview]
Message-ID: <20121002132357.GK24458@pengutronix.de> (raw)
In-Reply-To: <1344959336-18562-1-git-send-email-plagnioj@jcrosoft.com>

Hi J,

Can you revamp this on current master? Without the detection part if a
phy address is given, thus introducing no change when phy address is > 0.

Thanks
 Sascha

On Tue, Aug 14, 2012 at 05:48:55PM +0200, Jean-Christophe PLAGNIOL-VILLARD wrote:
> export via param the phy_addr and the phy_id detected
> 
> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
> ---
> Hi,
> 
> 	this is need to fix the calao board support since the introduction of
> 	the gigabit phy detection support
> 
> Best Regards,
> J.
>  drivers/net/miidev.c |   76 ++++++++++++++++++++++++++++++++++++++++++++++----
>  include/miidev.h     |    2 ++
>  2 files changed, 72 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/net/miidev.c b/drivers/net/miidev.c
> index b49944b..ab1811d 100644
> --- a/drivers/net/miidev.c
> +++ b/drivers/net/miidev.c
> @@ -236,18 +236,82 @@ static struct file_operations miidev_ops = {
>  	.lseek = dev_lseek_default,
>  };
>  
> +static int get_phy_id(struct mii_device *mdev, int phy_addr,
> +			  uint32_t *phy_id)
> +{
> +	int val;
> +
> +	val = mii_read(mdev, phy_addr, MII_PHYSID1);
> +	if (val < 0)
> +		return -EIO;
> +	*phy_id = (val & 0xffff) << 16;
> +	val = mii_read(mdev, phy_addr, MII_PHYSID2);
> +	if (val < 0)
> +		return -EIO;
> +	*phy_id |= (val & 0xffff);
> +
> +	return 0;
> +}
> +
> +static int phy_detect_one(struct mii_device *mdev, int phy_addr,
> +			  uint32_t *phy_id)
> +{
> +	uint32_t _phy_id;
> +	int ret;
> +
> +	ret = get_phy_id(mdev, phy_addr, &_phy_id);
> +
> +	if (ret)
> +		return ret;
> +
> +	/* If the phy_id is mostly Fs, there is no device there */
> +	if ((_phy_id & 0x1fffffff) == 0x1fffffff)
> +		return -EIO;
> +
> +	*phy_id = _phy_id;
> +
> +	return 0;
> +}
> +
> +static int phy_detect(struct mii_device *mdev)
> +{
> +	int phy_addr;
> +
> +	for (phy_addr = 0; phy_addr <= 0x1f; phy_addr++) {
> +		if (!phy_detect_one(mdev, phy_addr, &mdev->phy_id))
> +			return phy_addr;
> +	}
> +
> +	return -EIO;
> +}
> +
>  static int miidev_probe(struct device_d *dev)
>  {
>  	struct mii_device *mdev = dev->priv;
>  	int val;
>  	int caps = 0;
> +	char str[11];
> +
> +	if (mdev->address < 0) {
> +		int phy_addr;
> +
> +		phy_addr = phy_detect(mdev);
> +
> +		if (phy_addr < 0) {
> +			dev_err(dev, "cannot detect PHY\n");
> +			return -ENODEV;
> +		}
> +		mdev->address = phy_addr;
> +	} else {
> +		if (phy_detect_one(mdev, mdev->address, &mdev->phy_id) < 0)
> +			goto err_out;
> +	}
> +
> +	sprintf(str, "%u", mdev->address);
> +	dev_add_param_fixed(dev, "phy_addr", str);
> +	sprintf(str, "0x%08x", mdev->phy_id);
> +	dev_add_param_fixed(dev, "phy_id", str);
>  
> -	val = mii_read(mdev, mdev->address, MII_PHYSID1);
> -	if (val < 0 || val == 0xffff)
> -		goto err_out;
> -	val = mii_read(mdev, mdev->address, MII_PHYSID2);
> -	if (val < 0 || val == 0xffff)
> -		goto err_out;
>  	val = mii_read(mdev, mdev->address, MII_BMSR);
>  	if (val < 0)
>  		goto err_out;
> diff --git a/include/miidev.h b/include/miidev.h
> index 4bbf94c..2f39234 100644
> --- a/include/miidev.h
> +++ b/include/miidev.h
> @@ -38,6 +38,8 @@ struct mii_device {
>  	struct device_d *parent;
>  
>  	int address;	/* The address the phy has on the bus */
> +	uint32_t phy_id;	/* The phy id */
> +
>  	int	(*read) (struct mii_device *dev, int addr, int reg);
>  	int	(*write) (struct mii_device *dev, int addr, int reg, int value);
>  
> -- 
> 1.7.10.4
> 
> 
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2012-10-02 13:24 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-08-14 15:48 Jean-Christophe PLAGNIOL-VILLARD
2012-08-14 15:48 ` [for master PATCH 2/2] calao: at91 qil/tny/usb auto detect the phy addr Jean-Christophe PLAGNIOL-VILLARD
2012-09-15 14:23   ` Jean-Christophe PLAGNIOL-VILLARD
2012-10-02 14:25     ` Jean-Christophe PLAGNIOL-VILLARD
2012-08-14 19:58 ` [for master PATCH 1/2] miidev: add phy_addr detection support Sascha Hauer
2012-08-15  4:32   ` Jean-Christophe PLAGNIOL-VILLARD
2012-08-29  7:09     ` Sascha Hauer
2012-09-10 15:19 ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-11  7:53   ` Sascha Hauer
2012-09-11  8:57     ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-11  9:14       ` Sascha Hauer
2012-09-11  9:25         ` Jean-Christophe PLAGNIOL-VILLARD
2012-10-02 13:23 ` Sascha Hauer [this message]
2012-10-02 14:25   ` Jean-Christophe PLAGNIOL-VILLARD

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20121002132357.GK24458@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=plagnioj@jcrosoft.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox