mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: Sascha Hauer <s.hauer@pengutronix.de>
Cc: barebox@lists.infradead.org
Subject: Re: [for master PATCH 1/2] miidev: add phy_addr detection support
Date: Tue, 2 Oct 2012 16:25:09 +0200	[thread overview]
Message-ID: <20121002142509.GX26553@game.jcrosoft.org> (raw)
In-Reply-To: <20121002132357.GK24458@pengutronix.de>

On 15:23 Tue 02 Oct     , Sascha Hauer wrote:
> Hi J,
> 
> Can you revamp this on current master? Without the detection part if a
> phy address is given, thus introducing no change when phy address is > 0.
on the master this patch is not usefull as you apply Eric fix

Best Regards,
J.
> Thanks
>  Sascha
> 
> On Tue, Aug 14, 2012 at 05:48:55PM +0200, Jean-Christophe PLAGNIOL-VILLARD wrote:
> > export via param the phy_addr and the phy_id detected
> > 
> > Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
> > ---
> > Hi,
> > 
> > 	this is need to fix the calao board support since the introduction of
> > 	the gigabit phy detection support
> > 
> > Best Regards,
> > J.
> >  drivers/net/miidev.c |   76 ++++++++++++++++++++++++++++++++++++++++++++++----
> >  include/miidev.h     |    2 ++
> >  2 files changed, 72 insertions(+), 6 deletions(-)
> > 
> > diff --git a/drivers/net/miidev.c b/drivers/net/miidev.c
> > index b49944b..ab1811d 100644
> > --- a/drivers/net/miidev.c
> > +++ b/drivers/net/miidev.c
> > @@ -236,18 +236,82 @@ static struct file_operations miidev_ops = {
> >  	.lseek = dev_lseek_default,
> >  };
> >  
> > +static int get_phy_id(struct mii_device *mdev, int phy_addr,
> > +			  uint32_t *phy_id)
> > +{
> > +	int val;
> > +
> > +	val = mii_read(mdev, phy_addr, MII_PHYSID1);
> > +	if (val < 0)
> > +		return -EIO;
> > +	*phy_id = (val & 0xffff) << 16;
> > +	val = mii_read(mdev, phy_addr, MII_PHYSID2);
> > +	if (val < 0)
> > +		return -EIO;
> > +	*phy_id |= (val & 0xffff);
> > +
> > +	return 0;
> > +}
> > +
> > +static int phy_detect_one(struct mii_device *mdev, int phy_addr,
> > +			  uint32_t *phy_id)
> > +{
> > +	uint32_t _phy_id;
> > +	int ret;
> > +
> > +	ret = get_phy_id(mdev, phy_addr, &_phy_id);
> > +
> > +	if (ret)
> > +		return ret;
> > +
> > +	/* If the phy_id is mostly Fs, there is no device there */
> > +	if ((_phy_id & 0x1fffffff) == 0x1fffffff)
> > +		return -EIO;
> > +
> > +	*phy_id = _phy_id;
> > +
> > +	return 0;
> > +}
> > +
> > +static int phy_detect(struct mii_device *mdev)
> > +{
> > +	int phy_addr;
> > +
> > +	for (phy_addr = 0; phy_addr <= 0x1f; phy_addr++) {
> > +		if (!phy_detect_one(mdev, phy_addr, &mdev->phy_id))
> > +			return phy_addr;
> > +	}
> > +
> > +	return -EIO;
> > +}
> > +
> >  static int miidev_probe(struct device_d *dev)
> >  {
> >  	struct mii_device *mdev = dev->priv;
> >  	int val;
> >  	int caps = 0;
> > +	char str[11];
> > +
> > +	if (mdev->address < 0) {
> > +		int phy_addr;
> > +
> > +		phy_addr = phy_detect(mdev);
> > +
> > +		if (phy_addr < 0) {
> > +			dev_err(dev, "cannot detect PHY\n");
> > +			return -ENODEV;
> > +		}
> > +		mdev->address = phy_addr;
> > +	} else {
> > +		if (phy_detect_one(mdev, mdev->address, &mdev->phy_id) < 0)
> > +			goto err_out;
> > +	}
> > +
> > +	sprintf(str, "%u", mdev->address);
> > +	dev_add_param_fixed(dev, "phy_addr", str);
> > +	sprintf(str, "0x%08x", mdev->phy_id);
> > +	dev_add_param_fixed(dev, "phy_id", str);
> >  
> > -	val = mii_read(mdev, mdev->address, MII_PHYSID1);
> > -	if (val < 0 || val == 0xffff)
> > -		goto err_out;
> > -	val = mii_read(mdev, mdev->address, MII_PHYSID2);
> > -	if (val < 0 || val == 0xffff)
> > -		goto err_out;
> >  	val = mii_read(mdev, mdev->address, MII_BMSR);
> >  	if (val < 0)
> >  		goto err_out;
> > diff --git a/include/miidev.h b/include/miidev.h
> > index 4bbf94c..2f39234 100644
> > --- a/include/miidev.h
> > +++ b/include/miidev.h
> > @@ -38,6 +38,8 @@ struct mii_device {
> >  	struct device_d *parent;
> >  
> >  	int address;	/* The address the phy has on the bus */
> > +	uint32_t phy_id;	/* The phy id */
> > +
> >  	int	(*read) (struct mii_device *dev, int addr, int reg);
> >  	int	(*write) (struct mii_device *dev, int addr, int reg, int value);
> >  
> > -- 
> > 1.7.10.4
> > 
> > 
> > _______________________________________________
> > barebox mailing list
> > barebox@lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/barebox
> > 
> 
> -- 
> Pengutronix e.K.                           |                             |
> Industrial Linux Solutions                 | http://www.pengutronix.de/  |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

      reply	other threads:[~2012-10-02 14:27 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-08-14 15:48 Jean-Christophe PLAGNIOL-VILLARD
2012-08-14 15:48 ` [for master PATCH 2/2] calao: at91 qil/tny/usb auto detect the phy addr Jean-Christophe PLAGNIOL-VILLARD
2012-09-15 14:23   ` Jean-Christophe PLAGNIOL-VILLARD
2012-10-02 14:25     ` Jean-Christophe PLAGNIOL-VILLARD
2012-08-14 19:58 ` [for master PATCH 1/2] miidev: add phy_addr detection support Sascha Hauer
2012-08-15  4:32   ` Jean-Christophe PLAGNIOL-VILLARD
2012-08-29  7:09     ` Sascha Hauer
2012-09-10 15:19 ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-11  7:53   ` Sascha Hauer
2012-09-11  8:57     ` Jean-Christophe PLAGNIOL-VILLARD
2012-09-11  9:14       ` Sascha Hauer
2012-09-11  9:25         ` Jean-Christophe PLAGNIOL-VILLARD
2012-10-02 13:23 ` Sascha Hauer
2012-10-02 14:25   ` Jean-Christophe PLAGNIOL-VILLARD [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20121002142509.GX26553@game.jcrosoft.org \
    --to=plagnioj@jcrosoft.com \
    --cc=barebox@lists.infradead.org \
    --cc=s.hauer@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox