From: Sascha Hauer <s.hauer@pengutronix.de>
To: barebox@lists.infradead.org
Subject: v2012.10.0 is out
Date: Thu, 4 Oct 2012 17:45:40 +0200 [thread overview]
Message-ID: <20121004154540.GM1322@pengutronix.de> (raw)
We have an october release. Quite much has happened all over the place.
Most notable feature is the support for compressed images on ARM which
has the potential to reduce the binary size significantly.
Thank you all for working on barebox :)
Sascha
----------------------------------------------------------------
Alexander Aring (6):
mtd: fix compiler warnings
mtd: add private data to mtddev-hook
sandbox: add asm-generic/io.h
sandbox: fix whitespaces in board file
sandbox: fix malloc argument
fs: fs.c fix cast
Alexander Shiyan (3):
mc13xxx: Added mc13xxx_revision() function.
mc13xxx: Hide private struct mc13xxx from other units
mc13xxx: Fixed memory leak
Antony Pavlov (1):
commands/digest: don't print checksum for non-existing files
Eric Bénard (4):
i.MX35: add cspi1 support
stringlist: fix division by zero
i.MX51: unbreak FEC iomux
miidev: fix 1G wrong detection
Franck Jullien (1):
nios2: Fix DMA functions when CPU has no dcache
Jan Luebbe (2):
mtd: use correct format specifier
mtd/mtdraw: fix format specifier for ssize_t
Jan Weitzel (7):
ARM OMAP4: use writel and readl
Add support for OMAP4460 TPS62361
OMAP4460: ram init changes
OMAP4460: clock init
pcm049: use NAND_BUSWIDTH_AUTO
PCM049: nand_bootstrap add shebang
smsc911x: Check platformdata pointer
Jean-Christophe PLAGNIOL-VILLARD (60):
kbuild: add pre-bootloader (pbl) target
Add pre-bootloader (pbl) image support
pbl: discard unwind symbol if enable in barebox
Add compressed image support
decompressor: import malloc/free implementation for linux 3.4
ARM: add early malloc support needed by the decompressor
compressed image: add gzip support
at91: add lowlevel init to the pbl
kbuild: allow to have custom cppflags for pbl
arm: always enable the garbage collector for pbl
arm: at91: add debug_ll support
arm introduce CONFIG_MACH_ARM_HEAD option to allow custom head
arm: at91: add custom barebox-arm-head
at91: sam9260/sam9g20/sam9261/sam9g10/sam9263 add autodetect sdram size
at91: Calao and Atmel reboard sam{9260/9g20/9261/9g10/9263}ek autodetect sdram size
menu: add number key support
devices: fix missing conversion to DEVICE_ID_DYNAMIC
driver: set DEVICE_ID_DYNAMIC to -2 and DEVICE_ID_SINGLE to -1
arm: do not enable the previous bootz command
smc911x: move register define to smc911x.h
smc911x: introduce read/write ops
smc911x: add 16bit bus width support
smc911x: add support to pass the shift via platform data
smc911x: improve detection handle
smc911x: update chip detection
smc911x: check if the device is ready before using it
fs/mount: add autodetection type support
filetype: add fat filesystem support
fs/fat: add filetype
command/mount: add autodetection support
fs: add readlink support
fs: fix rmdir with symlink
fs: rename stat to lstat as we implement lstat
fs: add symlink support
fs: implement stat
fs: open: add symlink support
fs: introduce get_mounted_path to get the path where a file is mounted
ramfs: add symlink and readlink support
nfs: add readlink support
test: add -L support to test if it's a symbolic link
command: add readlink support
command: add ln support
ls: add symlink support to -l
dirname: add -V option to return only path related to the mountpoint
recursive_action: add ACTION_FOLLOWLINKS support
envfs: introduce version major and minor
envfs: add support of variable inode size
envfs: add support of symlink
defautenv: add support of symlink
Calao boards: enable the pbl
Atmel sam9x boards: enable the pbl
fs/nfs: fix read when size < 1024
smc911x: fix typo pn check if the device is ready before using it
uncompress: drop wrong BUG(uncompress_size)
arm: armlinux: get the architecture before shutdown barebox
tap: fix missing parent setting on eth_device
MAKEALL: accept defconfig with '-' in it
sandbox: check only image option in the second getopt
sandbox: do not register device before barebox is started
net/tap: use xzalloc to allocate data
Maxime Ripard (1):
arm: cfa10036: Add proper resource length
Renaud Barbier (12):
ppc: GIANFAR base address definition
net: GIANFAR driver
fsl: Freescale TSEC specific initialization.
ppc: P2020RDB Ethernet configuration
mpc85xx: i2c frequency
ppc/asm/fsl_i2c.h is removed
mpc85xx: header update
ppc: add unaligned support
IMX driver: replace imx -> fsl
i2c: adapt the i2c-imx driver to mpc85xx machines
ppc: p2020rdb i2c support
fsl TSEC: register map boundary
Sascha Hauer (59):
mtd OMAP NAND: Fix dev_ready handling
Makefile.clean: include Makefiles again
ARM pbl: Add .gitignore for generated files
Merge tag 'pbl' of git://git.jcrosoft.org/barebox into for-next/pbl
ARM OMAP gpmc nand: specify platform data in boards
mtd OMAP NAND: Use prefetch engine
mtd nand: implement buswidth detection
mtd OMAP NAND: implement buswidth autodetection support
hush: Make exit a shell builtin
hush: catch errors from execute_binfmt
Makefile.lib: add disasm and ln commands
Makefile: generate a barebox-flash-image link
ARM eukrea cpuimx25: Move flash_header to seperate file
ARM s3c boards: Do not hardcode image sizes
ARM boards: Make boards pbl safe
ARM Makefile: Do not hardcode targets in MLO/netx/davinci/s5p
ARM: fix netx/MLO/s5p image build for pbl
ARM pbl: generate zbarebox.map in $(obj)
ARM __mmu_cache_*: Do not clobber registers
ARM MMU: call __mmu_cache_* as regular C functions
ARM pbl: enable MMU during decompression
create a common ARM flush_icache function
add gpiolib support
ARM i.MX35 3stack: do not dereference members of struct mc13xxx
blackfin: Add unaligned support
openrisc: Add unaligned support
ARM i.MX: switch to gpiolib support
Merge tag 'fs-symlink' of git://git.jcrosoft.org/barebox into for-next/link
Merge branch 'for-next/atmel'
Merge branch 'for-next/device-id'
Merge branch 'for-next/fs'
Merge branch 'for-next/gpiolib'
Merge branch 'for-next/hush'
Merge branch 'for-next/i2c'
Merge branch 'for-next/imx'
Merge branch 'for-next/jtag'
Merge branch 'for-next/link'
Merge branch 'for-next/mc13xxx'
Merge branch 'for-next/menu'
Merge branch 'for-next/misc'
Merge branch 'for-next/mtd'
Merge branch 'for-next/omap'
Merge branch 'for-next/pbl'
Merge branch 'for-next/ppc'
Merge branch 'for-next/sandbox'
Merge branch 'for-next/smc911x'
Merge branch 'for-next/usb'
ARM i.MX21: Add missing include
mips: remove undefined local_irq_save/local_irq_restore
mtd mtdraw: Fix partial page read
Make: Fix if_changed when command contains backslashes
ARM mmu: use xmemalign
mtd mtdraw: fix fixing partial page read
ARM i.MX51 babbage: update defconfig
kconfig: remove autogenerated file
mci imx-esdhc: increase write timeout
ARM i.MX pca100: Fix nand boot
ARM: Disable MMU feature in PBL
Release v2012.10.0
Steffen Trumtrar (10):
ARM i.MX: Add support for i2c on imx6
usb: use ep-specific pwrgood delay
ARM i.MX6: add the usbphy1 base addr
ARM i.MX6: enable usbphy1
ARM i.MX6: Add usb-ehci to sabrelite
ARM i.MX6: Add i2c iomux to sabrelite
mfd: add stmpe-i2c driver
gpio: add driver for stmpe io-expander
ARM i.MX6: add usb function prototypes
ARM i.MX6: fix usb_ehci warnings for sabrelite
Wjatscheslaw Stoljarski (1):
Add JTAG bitbang driver
Wolfram Sang (3):
net: miidev: really wait for auto negotiation
arm: mxs: add proper resource length
net: tftp: timeout only after a proper amount of time
gregory hermant (3):
Enable pull-up on Rx serial ports for the CALAO MB-QIL-A9260
Add documentation for the calao boards
NAND Flash SMC timings update (nwe_pulse) for calao board based on AT91SAM9G20 SoC
vicencb@gmail.com (3):
ARM: set rev instead of returning it
mmc_omap: improve error message
add gitignore file
Documentation/boards.dox | 5 +
MAKEALL | 7 +-
Makefile | 32 +-
arch/arm/Kconfig | 8 +
arch/arm/Makefile | 56 +-
arch/arm/boards/a9m2410/Makefile | 1 +
arch/arm/boards/a9m2410/a9m2410.c | 7 -
arch/arm/boards/a9m2440/Makefile | 1 +
arch/arm/boards/a9m2440/a9m2440.c | 7 -
arch/arm/boards/at91sam9260ek/init.c | 2 +-
arch/arm/boards/at91sam9261ek/init.c | 2 +-
arch/arm/boards/at91sam9263ek/init.c | 2 +-
arch/arm/boards/beagle/board.c | 11 +-
arch/arm/boards/ccxmx51/Makefile | 1 +
arch/arm/boards/ccxmx51/ccxmx51.c | 2 +-
arch/arm/boards/chumby_falconwing/falconwing.c | 2 +-
arch/arm/boards/crystalfontz-cfa10036/cfa10036.c | 5 +-
.../crystalfontz-cfa10036/env/init/automount | 2 +-
arch/arm/boards/edb93xx/Makefile | 1 +
arch/arm/boards/edb93xx/edb93xx.c | 2 +-
arch/arm/boards/eukrea_cpuimx25/Makefile | 3 +
arch/arm/boards/eukrea_cpuimx25/eukrea_cpuimx25.c | 34 -
arch/arm/boards/eukrea_cpuimx25/flash_header.c | 61 +
arch/arm/boards/eukrea_cpuimx27/Makefile | 1 +
arch/arm/boards/eukrea_cpuimx27/eukrea_cpuimx27.c | 8 +-
arch/arm/boards/eukrea_cpuimx35/Makefile | 2 +
arch/arm/boards/eukrea_cpuimx35/eukrea_cpuimx35.c | 4 +-
arch/arm/boards/eukrea_cpuimx51/Makefile | 1 +
arch/arm/boards/freescale-mx25-3-stack/3stack.c | 2 +-
arch/arm/boards/freescale-mx25-3-stack/Makefile | 1 +
arch/arm/boards/freescale-mx28-evk/mx28-evk.c | 10 +-
arch/arm/boards/freescale-mx35-3-stack/3stack.c | 6 +-
arch/arm/boards/freescale-mx35-3-stack/Makefile | 2 +
arch/arm/boards/freescale-mx51-pdk/Makefile | 1 +
arch/arm/boards/freescale-mx51-pdk/board.c | 2 +-
arch/arm/boards/freescale-mx53-loco/Makefile | 1 +
arch/arm/boards/freescale-mx53-smd/Makefile | 1 +
arch/arm/boards/freescale-mx6-arm2/Makefile | 1 +
arch/arm/boards/freescale-mx6-sabrelite/Makefile | 1 +
arch/arm/boards/freescale-mx6-sabrelite/board.c | 33 +
arch/arm/boards/friendlyarm-mini2440/Makefile | 1 +
arch/arm/boards/friendlyarm-mini2440/mini2440.c | 7 -
arch/arm/boards/friendlyarm-tiny210/tiny210.c | 2 +-
arch/arm/boards/guf-cupid/Makefile | 1 +
arch/arm/boards/guf-neso/Makefile | 3 +-
arch/arm/boards/guf-neso/board.c | 2 +-
arch/arm/boards/imx21ads/Makefile | 1 +
arch/arm/boards/imx21ads/imx21ads.c | 2 +-
arch/arm/boards/imx27ads/Makefile | 1 +
arch/arm/boards/imx27ads/imx27ads.c | 2 +-
arch/arm/boards/karo-tx25/Makefile | 1 +
arch/arm/boards/karo-tx28/tx28-stk5.c | 12 +-
arch/arm/boards/karo-tx51/Makefile | 3 +-
arch/arm/boards/mioa701/board.c | 2 +-
arch/arm/boards/mioa701/env/bin/sdcard_override | 2 +-
arch/arm/boards/netx/Makefile | 2 +-
arch/arm/boards/netx/netx.c | 2 +-
arch/arm/boards/omap343xdsp/board.c | 2 +-
arch/arm/boards/panda/Makefile | 4 +-
arch/arm/boards/panda/board.c | 2 +-
arch/arm/boards/panda/lowlevel.c | 4 +-
arch/arm/boards/panda/mux.c | 8 +
arch/arm/boards/pcm027/Makefile | 1 +
arch/arm/boards/pcm037/Makefile | 1 +
arch/arm/boards/pcm038/Makefile | 1 +
arch/arm/boards/pcm038/pcm038.c | 2 +-
arch/arm/boards/pcm038/pcm970.c | 4 +-
arch/arm/boards/pcm043/Makefile | 1 +
arch/arm/boards/pcm043/pcm043.c | 2 +-
arch/arm/boards/pcm049/Makefile | 1 +
arch/arm/boards/pcm049/board.c | 9 +-
arch/arm/boards/pcm049/env/bin/nand_bootstrap | 4 +-
arch/arm/boards/pcm049/lowlevel.c | 15 +-
arch/arm/boards/pcm049/mux.c | 8 +
arch/arm/boards/phycard-a-l1/pca-a-l1.c | 11 +-
arch/arm/boards/phycard-a-xl2/Makefile | 1 +
.../boards/phycard-a-xl2/env/bin/nand_bootstrap | 2 +-
arch/arm/boards/phycard-a-xl2/lowlevel.c | 13 +-
arch/arm/boards/phycard-a-xl2/mux.c | 8 +
arch/arm/boards/phycard-a-xl2/pca-a-xl2.c | 13 +-
arch/arm/boards/phycard-i.MX27/Makefile | 1 +
arch/arm/boards/phycard-i.MX27/lowlevel_init.S | 5 +-
arch/arm/boards/phycard-i.MX27/pca100.c | 12 +-
arch/arm/boards/qil-a9260/init.c | 12 +-
arch/arm/boards/qil-a9260/qil-a9260.dox | 22 +
arch/arm/boards/scb9328/Makefile | 1 +
arch/arm/boards/scb9328/scb9328.c | 4 +-
arch/arm/boards/tny-a926x/init.c | 4 +-
arch/arm/boards/tny-a926x/tny-a9263.dox | 33 +
arch/arm/boards/tny-a926x/tny-a9g20-lpw.dox | 37 +
arch/arm/boards/toshiba-ac100/serial.c | 2 +-
arch/arm/boards/tqma53/Makefile | 1 +
arch/arm/boards/usb-a926x/init.c | 10 +-
arch/arm/boards/usb-a926x/usb-a9263.dox | 30 +
arch/arm/boards/usb-a926x/usb-a9g20-lpw.dox | 33 +
arch/arm/boards/versatile/versatilepb.c | 2 +-
arch/arm/configs/at91sam9260ek_defconfig | 1 +
arch/arm/configs/at91sam9261ek_defconfig | 1 +
arch/arm/configs/at91sam9263ek_defconfig | 1 +
arch/arm/configs/at91sam9g10ek_defconfig | 1 +
arch/arm/configs/at91sam9g20ek_defconfig | 1 +
arch/arm/configs/at91sam9m10g45ek_defconfig | 1 +
arch/arm/configs/at91sam9x5ek_defconfig | 1 +
arch/arm/configs/freescale_mx51_babbage_defconfig | 2 +-
arch/arm/configs/qil_a9260_128mib_defconfig | 1 +
arch/arm/configs/qil_a9260_defconfig | 1 +
arch/arm/configs/tny_a9260_defconfig | 1 +
arch/arm/configs/tny_a9263_defconfig | 1 +
arch/arm/configs/tny_a9g20_defconfig | 1 +
arch/arm/configs/usb_a9260_defconfig | 1 +
arch/arm/configs/usb_a9263_128mib_defconfig | 1 +
arch/arm/configs/usb_a9263_defconfig | 1 +
arch/arm/configs/usb_a9g20_128mib_defconfig | 1 +
arch/arm/configs/usb_a9g20_defconfig | 1 +
arch/arm/cpu/Makefile | 7 +-
arch/arm/cpu/cache-armv4.S | 3 +-
arch/arm/cpu/cache-armv7.S | 6 +-
arch/arm/cpu/mmu.c | 27 +-
arch/arm/cpu/mmu.h | 8 +
arch/arm/cpu/start-pbl.c | 217 ++
arch/arm/cpu/start-reset.c | 67 +
arch/arm/cpu/start.c | 58 +-
arch/arm/include/asm/barebox-arm-head.h | 4 +
arch/arm/include/asm/cache.h | 9 +
arch/arm/lib/Makefile | 4 +
arch/arm/lib/armlinux.c | 5 +-
arch/arm/lib/barebox.lds.S | 3 +-
arch/arm/mach-at91/Makefile | 2 +
arch/arm/mach-at91/at91sam9260_devices.c | 4 +
arch/arm/mach-at91/at91sam9261_devices.c | 4 +
arch/arm/mach-at91/at91sam9263_devices.c | 4 +
arch/arm/mach-at91/include/mach/at91sam9_sdramc.h | 28 +
arch/arm/mach-at91/include/mach/barebox-arm-head.h | 33 +
arch/arm/mach-at91/include/mach/debug_ll.h | 37 +
arch/arm/mach-ep93xx/Makefile | 1 +
arch/arm/mach-imx/Makefile | 3 +-
arch/arm/mach-imx/devices.c | 2 +-
arch/arm/mach-imx/gpio.c | 94 +-
arch/arm/mach-imx/gpio.h | 4 -
arch/arm/mach-imx/imx1.c | 21 +-
arch/arm/mach-imx/imx21.c | 24 +-
arch/arm/mach-imx/imx25.c | 15 +-
arch/arm/mach-imx/imx27.c | 19 +-
arch/arm/mach-imx/imx31.c | 14 +-
arch/arm/mach-imx/imx35.c | 14 +-
arch/arm/mach-imx/imx51.c | 16 +-
arch/arm/mach-imx/imx53.c | 21 +-
arch/arm/mach-imx/imx6.c | 28 +-
arch/arm/mach-imx/include/mach/clock.h | 2 +-
arch/arm/mach-imx/include/mach/devices-imx35.h | 5 +
arch/arm/mach-imx/include/mach/devices-imx6.h | 15 +
arch/arm/mach-imx/include/mach/imx35-regs.h | 2 +
arch/arm/mach-imx/include/mach/imx6-regs.h | 1 +
arch/arm/mach-imx/include/mach/iomux-mx51.h | 14 +-
arch/arm/mach-imx/include/mach/usb.h | 3 +
arch/arm/mach-imx/speed-imx25.c | 2 +-
arch/arm/mach-imx/speed-imx27.c | 2 +-
arch/arm/mach-imx/speed-imx35.c | 7 +-
arch/arm/mach-imx/speed-imx51.c | 2 +-
arch/arm/mach-imx/speed-imx53.c | 4 +-
arch/arm/mach-imx/speed-imx6.c | 6 +
arch/arm/mach-imx/usb-imx6.c | 111 +
arch/arm/mach-omap/Makefile | 3 +
arch/arm/mach-omap/devices-gpmc-nand.c | 26 +-
arch/arm/mach-omap/gpmc.c | 61 +
arch/arm/mach-omap/include/mach/gpmc.h | 16 +-
arch/arm/mach-omap/include/mach/gpmc_nand.h | 20 +-
arch/arm/mach-omap/include/mach/omap4-clock.h | 19 +
arch/arm/mach-omap/include/mach/omap4-silicon.h | 13 +-
arch/arm/mach-omap/omap4_clock.c | 58 +-
arch/arm/mach-omap/omap4_generic.c | 90 +-
arch/arm/mach-samsung/Makefile | 2 +
arch/arm/pbl/.gitignore | 5 +
arch/arm/pbl/Makefile | 40 +
arch/arm/pbl/piggy.gzip.S | 6 +
arch/arm/pbl/piggy.lzo.S | 6 +
arch/arm/pbl/zbarebox.lds.S | 78 +
arch/blackfin/Makefile | 2 +-
arch/blackfin/boards/ipe337/ipe337.c | 7 +-
arch/blackfin/include/asm/unaligned.h | 11 +
arch/mips/Makefile | 2 -
arch/mips/boards/dlink-dir-320/serial.c | 2 +-
arch/mips/boards/qemu-malta/init.c | 2 +-
arch/mips/boards/rzx50/serial.c | 2 +-
arch/mips/include/asm/mipsregs.h | 4 -
arch/nios2/boards/generic/generic.c | 2 +-
arch/nios2/include/asm/dma-mapping.h | 14 +-
arch/openrisc/boards/generic/generic.c | 2 +-
arch/openrisc/include/asm/unaligned.h | 51 +
arch/ppc/boards/freescale-p2020rdb/p2020rdb.c | 30 +-
arch/ppc/configs/p2020rdb_defconfig | 9 +
arch/ppc/include/asm/fsl_i2c.h | 86 -
arch/ppc/include/asm/unaligned.h | 16 +
arch/ppc/mach-mpc85xx/Makefile | 1 +
arch/ppc/mach-mpc85xx/eth-devices.c | 49 +
.../include/mach/{clocks.h => clock.h} | 1 +
arch/ppc/mach-mpc85xx/include/mach/gianfar.h | 31 +
arch/ppc/mach-mpc85xx/include/mach/immap_85xx.h | 11 +
arch/ppc/mach-mpc85xx/speed.c | 11 +-
arch/ppc/mach-mpc85xx/time.c | 2 +-
arch/sandbox/board/Makefile | 1 +
arch/sandbox/board/board.c | 2 +-
arch/sandbox/board/console.c | 2 +-
arch/sandbox/board/devices.c | 33 +
arch/sandbox/board/hostfile.c | 19 +-
arch/sandbox/include/asm/io.h | 7 +-
arch/sandbox/mach-sandbox/include/mach/linux.h | 3 +
arch/sandbox/os/common.c | 77 +-
arch/x86/Makefile | 5 -
arch/x86/boards/x86_generic/generic_pc.c | 2 +-
commands/Kconfig | 11 +-
commands/Makefile | 2 +
commands/dirname.c | 24 +-
commands/ln.c | 51 +
commands/ls.c | 31 +-
commands/mount.c | 18 +-
commands/readlink.c | 80 +
commands/test.c | 11 +-
common/Kconfig | 44 +
common/Makefile | 2 +-
common/command.c | 20 -
common/environment.c | 150 +-
common/filetype.c | 20 +
common/hush.c | 45 +-
common/menu.c | 17 +
defaultenv-2/base/init/automount | 6 +-
drivers/Kconfig | 2 +
drivers/Makefile | 2 +
drivers/gpio/Kconfig | 13 +
drivers/gpio/Makefile | 2 +
drivers/gpio/gpio-stmpe.c | 161 ++
drivers/gpio/gpio.c | 134 ++
drivers/i2c/busses/Kconfig | 4 +-
drivers/i2c/busses/i2c-imx.c | 324 ++-
drivers/mci/imx-esdhc.c | 2 +-
drivers/mci/omap_hsmmc.c | 2 +-
drivers/mfd/Kconfig | 4 +
drivers/mfd/Makefile | 1 +
drivers/mfd/mc13xxx.c | 31 +-
drivers/mfd/stmpe-i2c.c | 153 ++
drivers/misc/Kconfig | 17 +
drivers/misc/Makefile | 5 +
drivers/misc/jtag.c | 392 ++++
drivers/mtd/core.c | 12 +-
drivers/mtd/mtd.h | 5 +-
drivers/mtd/mtdoob.c | 15 +-
drivers/mtd/mtdraw.c | 22 +-
drivers/mtd/nand/Makefile | 1 +
drivers/mtd/nand/nand_base.c | 20 +-
drivers/mtd/nand/nand_omap_gpmc.c | 177 +-
drivers/mtd/nand/nand_s3c24xx.c | 10 +
drivers/net/Kconfig | 11 +-
drivers/net/Makefile | 1 +
drivers/net/gianfar.c | 548 +++++
drivers/net/gianfar.h | 284 +++
drivers/net/miidev.c | 35 +-
drivers/net/smc911x.c | 589 ++---
drivers/net/smc911x.h | 342 +++
drivers/net/tap.c | 5 +-
drivers/spi/Kconfig | 2 +-
drivers/spi/imx_spi.c | 2 +-
drivers/usb/core/usb.c | 3 +-
fs/Kconfig | 5 +
fs/fat/fat.c | 1 +
fs/fs.c | 267 ++-
fs/nfs.c | 92 +-
fs/ramfs.c | 61 +-
include/asm-generic/memory_layout.h | 1 +
include/asm-generic/sections.h | 2 +
include/driver.h | 4 +-
include/envfs.h | 15 +-
include/filetype.h | 1 +
include/fs.h | 17 +
include/gpio.h | 27 +-
include/jtag.h | 109 +
include/libbb.h | 2 +-
include/linux/decompress/mm.h | 68 +
include/linux/mtd/nand.h | 3 +
include/mfd/mc13xxx.h | 19 +-
include/mfd/stmpe-i2c.h | 53 +
include/smc911x.h | 18 +
lib/decompress_inflate.c | 1 +
lib/recursive_action.c | 7 +-
lib/uncompress.c | 2 -
net/tftp.c | 3 +-
pbl/Makefile | 5 +
pbl/misc.c | 14 +
pbl/string.c | 127 +
scripts/Kbuild.include | 2 +-
scripts/Makefile.build | 48 +-
scripts/Makefile.clean | 2 +-
scripts/Makefile.lib | 20 +
scripts/bareboxenv.c | 2 +-
scripts/kconfig/.gitignore | 1 +
scripts/kconfig/zconf.lex.c | 2420 --------------------
295 files changed, 6096 insertions(+), 3834 deletions(-)
create mode 100644 arch/arm/boards/eukrea_cpuimx25/flash_header.c
create mode 100644 arch/arm/boards/qil-a9260/qil-a9260.dox
create mode 100644 arch/arm/boards/tny-a926x/tny-a9263.dox
create mode 100644 arch/arm/boards/tny-a926x/tny-a9g20-lpw.dox
create mode 100644 arch/arm/boards/usb-a926x/usb-a9263.dox
create mode 100644 arch/arm/boards/usb-a926x/usb-a9g20-lpw.dox
create mode 100644 arch/arm/cpu/mmu.h
create mode 100644 arch/arm/cpu/start-pbl.c
create mode 100644 arch/arm/cpu/start-reset.c
create mode 100644 arch/arm/include/asm/cache.h
create mode 100644 arch/arm/mach-at91/include/mach/barebox-arm-head.h
create mode 100644 arch/arm/mach-at91/include/mach/debug_ll.h
delete mode 100644 arch/arm/mach-imx/gpio.h
create mode 100644 arch/arm/mach-imx/usb-imx6.c
create mode 100644 arch/arm/pbl/.gitignore
create mode 100644 arch/arm/pbl/Makefile
create mode 100644 arch/arm/pbl/piggy.gzip.S
create mode 100644 arch/arm/pbl/piggy.lzo.S
create mode 100644 arch/arm/pbl/zbarebox.lds.S
create mode 100644 arch/blackfin/include/asm/unaligned.h
create mode 100644 arch/openrisc/include/asm/unaligned.h
delete mode 100644 arch/ppc/include/asm/fsl_i2c.h
create mode 100644 arch/ppc/include/asm/unaligned.h
create mode 100644 arch/ppc/mach-mpc85xx/eth-devices.c
rename arch/ppc/mach-mpc85xx/include/mach/{clocks.h => clock.h} (91%)
create mode 100644 arch/ppc/mach-mpc85xx/include/mach/gianfar.h
create mode 100644 arch/sandbox/board/devices.c
create mode 100644 commands/ln.c
create mode 100644 commands/readlink.c
create mode 100644 drivers/gpio/Kconfig
create mode 100644 drivers/gpio/Makefile
create mode 100644 drivers/gpio/gpio-stmpe.c
create mode 100644 drivers/gpio/gpio.c
create mode 100644 drivers/mfd/stmpe-i2c.c
create mode 100644 drivers/misc/Kconfig
create mode 100644 drivers/misc/Makefile
create mode 100644 drivers/misc/jtag.c
create mode 100644 drivers/net/gianfar.c
create mode 100644 drivers/net/gianfar.h
create mode 100644 drivers/net/smc911x.h
create mode 100644 include/jtag.h
create mode 100644 include/linux/decompress/mm.h
create mode 100644 include/mfd/stmpe-i2c.h
create mode 100644 include/smc911x.h
create mode 100644 pbl/Makefile
create mode 100644 pbl/misc.c
create mode 100644 pbl/string.c
delete mode 100644 scripts/kconfig/zconf.lex.c
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
reply other threads:[~2012-10-04 15:45 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20121004154540.GM1322@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox