mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: Carlo Caione <carlo.caione@gmail.com>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH 3/4] Add support for BCM2835
Date: Fri, 5 Oct 2012 12:30:10 +0200	[thread overview]
Message-ID: <20121005103010.GQ26553@game.jcrosoft.org> (raw)
In-Reply-To: <CAOQ7t2audMLVExJ6tWKWtadwPcsWfxK03L68RE0EbSBd0Dcjgg@mail.gmail.com>

On 10:47 Fri 05 Oct     , Carlo Caione wrote:
> Signed-off-by: Carlo Caione <carlo.caione@gmail.com>
> ---
>  arch/arm/Kconfig                              |   7 +
>  arch/arm/Makefile                             |   1 +
>  arch/arm/mach-bcm2835/Kconfig                 |  22 +++
>  arch/arm/mach-bcm2835/Makefile                |   3 +
>  arch/arm/mach-bcm2835/clock.c                 |  59 ++++++++
>  arch/arm/mach-bcm2835/core.c                  | 108 ++++++++++++++
>  arch/arm/mach-bcm2835/gpio.c                  | 145 ++++++++++++++++++
>  arch/arm/mach-bcm2835/include/mach/clkdev.h   |   7 +
>  arch/arm/mach-bcm2835/include/mach/clock.h    |  10 ++
>  arch/arm/mach-bcm2835/include/mach/core.h     |  27 ++++
>  arch/arm/mach-bcm2835/include/mach/gpio.h     |   9 ++
>  arch/arm/mach-bcm2835/include/mach/platform.h | 207 ++++++++++++++++++++++++++
>  12 files changed, 605 insertions(+)
>  create mode 100644 arch/arm/mach-bcm2835/Kconfig
>  create mode 100644 arch/arm/mach-bcm2835/Makefile
>  create mode 100644 arch/arm/mach-bcm2835/clock.c
>  create mode 100644 arch/arm/mach-bcm2835/core.c
>  create mode 100644 arch/arm/mach-bcm2835/gpio.c
>  create mode 100644 arch/arm/mach-bcm2835/include/mach/clkdev.h
>  create mode 100644 arch/arm/mach-bcm2835/include/mach/clock.h
>  create mode 100644 arch/arm/mach-bcm2835/include/mach/core.h
>  create mode 100644 arch/arm/mach-bcm2835/include/mach/gpio.h
>  create mode 100644 arch/arm/mach-bcm2835/include/mach/platform.h
> 
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index 8278c82..5029c50 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -31,6 +31,12 @@ config ARCH_AT91
>  	select HAS_DEBUG_LL
>  	select HAVE_MACH_ARM_HEAD
> 
> +config ARCH_BCM2835
> +	bool "Broadcom BCM2835 boards"
> +	select GENERIC_GPIO
wait a fwe I'm going to send a patch to drop the select of GENERIC_GPIO for
GPIOLIB and also add a generic gpio header
> +	select GPIOLIB
> +	select CPU_ARM1176
> +
>  config ARCH_EP93XX
>  	bool "Cirrus Logic EP93xx"
>  	select CPU_ARM920T
> @@ -99,6 +105,7 @@ endchoice
> 
>  source arch/arm/cpu/Kconfig
>  source arch/arm/mach-at91/Kconfig
> +source arch/arm/mach-bcm2835/Kconfig
>  source arch/arm/mach-ep93xx/Kconfig
>  source arch/arm/mach-imx/Kconfig
>  source arch/arm/mach-mxs/Kconfig
> diff --git a/arch/arm/Makefile b/arch/arm/Makefile
> index 855043a..2ea11d6 100644
> --- a/arch/arm/Makefile
> +++ b/arch/arm/Makefile
> @@ -52,6 +52,7 @@ AFLAGS   += -include asm/unified.h -msoft-float
> $(AFLAGS_THUMB2)
>  # Machine directory name.  This list is sorted alphanumerically
>  # by CONFIG_* macro name.
>  machine-$(CONFIG_ARCH_AT91)		:= at91
> +machine-$(CONFIG_ARCH_BCM2835)		:= bcm2835
>  machine-$(CONFIG_ARCH_EP93XX)		:= ep93xx
>  machine-$(CONFIG_ARCH_IMX)		:= imx
>  machine-$(CONFIG_ARCH_MXS)		:= mxs
> diff --git a/arch/arm/mach-bcm2835/Kconfig b/arch/arm/mach-bcm2835/Kconfig
> new file mode 100644
> index 0000000..9591004
> --- /dev/null
> +++ b/arch/arm/mach-bcm2835/Kconfig
> @@ -0,0 +1,22 @@
> +if ARCH_BCM2835
> +
> +config ARCH_TEXT_BASE
> +	hex
> +	default 0x04000000 if MACH_RPI
with the board patch
> +
> +
> +config BOARDINFO
> +	default "RaspberryPi (BCM2835/ARM1176JZF-S)" if MACH_RPI
ditoo
> +
> +choice
> +	prompt "Broadcom Board type"
> +
> +config MACH_RPI
> +	bool "RaspberryPi (BCM2835/ARM1176JZF-S)"
ditto
> +	select ARM_AMBA
> +	select CLKDEV_LOOKUP
this 2 select move them at SoC level
> +
> +endchoice
> +
> +
> +endif
> diff --git a/arch/arm/mach-bcm2835/Makefile b/arch/arm/mach-bcm2835/Makefile
> new file mode 100644
> index 0000000..04e6470
> --- /dev/null
> +++ b/arch/arm/mach-bcm2835/Makefile
> @@ -0,0 +1,3 @@
> +obj-y += core.o
> +obj-y += clock.o
> +obj-y += gpio.o
> diff --git a/arch/arm/mach-bcm2835/clock.c b/arch/arm/mach-bcm2835/clock.c
> new file mode 100644
> index 0000000..1d9b24a
> --- /dev/null
> +++ b/arch/arm/mach-bcm2835/clock.c
> @@ -0,0 +1,59 @@
> +/*
> + * Copyright (C) 2009 Alessandro Rubini
> + */
> +
> +#include <common.h>
> +#include <init.h>
> +#include <clock.h>
> +#include <debug_ll.h>
> +
> +#include <linux/clkdev.h>
> +#include <linux/clk.h>
> +#include <linux/err.h>
> +
> +#include <io.h>
> +#include <asm/hardware/arm_timer.h>
> +#include <asm/armlinux.h>
> +
> +#include <mach/platform.h>
> +#include <mach/clock.h>
> +
> +int clk_enable(struct clk *clk)
> +{
> +	return 0;
> +}
> +EXPORT_SYMBOL(clk_enable);
> +
> +void clk_disable(struct clk *clk)
> +{
> +}
> +EXPORT_SYMBOL(clk_disable);
> +
> +unsigned long clk_get_rate(struct clk *clk)
> +{
> +	return clk->rate;
> +}
> +EXPORT_SYMBOL(clk_get_rate);
> +
> +long clk_round_rate(struct clk *clk, unsigned long rate)
> +{
> +	return clk->rate;
> +}
> +EXPORT_SYMBOL(clk_round_rate);
> +
> +int clk_set_rate(struct clk *clk, unsigned long rate)
> +{
> +	return -EIO;
> +}
> +EXPORT_SYMBOL(clk_set_rate);
> +
> +int bcm2835_clk_create(struct clk *clk, const char *dev_id)
> +{
> +	struct clk_lookup *clkdev;
> +
> +	clkdev = clkdev_alloc(clk, NULL, dev_id);
> +	if (!clkdev)
> +		return -ENOMEM;
> +	clkdev_add(clkdev);
> +	return 0;
> +}
no need this clk_create drop id
on nomadik I forget to remove it when I update the amba support
> diff --git a/arch/arm/mach-bcm2835/core.c b/arch/arm/mach-bcm2835/core.c
> new file mode 100644
> index 0000000..2c41c86
> --- /dev/null
> +++ b/arch/arm/mach-bcm2835/core.c
> @@ -0,0 +1,108 @@
> +/*
> + * Author: Carlo Caione <carlo@carlocaione.org>
> + *
> + * Based on mach-nomadik
> + * Copyright (C) 2009 Jean-Christophe PLAGNIOL-VILLARD <plagnio@jcrosoft.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + *
> + */
> +
> +#include <common.h>
> +#include <init.h>
> +#include <clock.h>
> +#include <debug_ll.h>
> +
> +#include <linux/clkdev.h>
> +#include <linux/clk.h>
> +#include <linux/err.h>
> +
> +#include <io.h>
> +#include <asm/hardware/arm_timer.h>
> +#include <asm/armlinux.h>
> +
> +#include <mach/platform.h>
> +#include <mach/core.h>
> +#include <mach/clock.h>
> +#include <linux/amba/bus.h>
> +
> +static struct clk ref30_clk = {
> +	.rate = 3000000,
30 * 1000 * 1000 to be more readable
> +};
> +
> +static struct clk bcm2835_dummy;
> +
> +void bcm2835_add_device_sdram(u32 size)
> +{
> +	arm_add_mem_device("ram0", 0x00000000, size);
> +}
> +
> +static struct clk_lookup clocks_lookups[] = {
> +	CLKDEV_CON_ID("apb_pclk", &bcm2835_dummy),
> +	CLKDEV_DEV_ID("uart-pl0110", &ref30_clk),
> +};
> +
> +#define STC_FREQ_HZ 1000000
move the clocksource as a driver and request it's clcok cf my patch on the ml
> +
> +static uint64_t stc_read_cycles(void)
> +{
> +	return (uint64_t) readl(ST_BASE + 0x04);
no need the cast
> +}
> +
> +static struct clocksource bcm2835_cs = {
> +	.read = stc_read_cycles,
> +	.mask = CLOCKSOURCE_MASK(32),
> +};
> +
> +static int bcm2835_gpio_init(void)
> +{
> +    add_generic_device("bcm2835-gpio", 0, NULL, 0x20200000, 0xB0,
> IORESOURCE_MEM, NULL);
> +	return 0;
> +}
> +coredevice_initcall(bcm2835_gpio_init);
> +
> +static int bcm2835_clocksource_init(void)
> +{
> +	clocks_calc_mult_shift(&bcm2835_cs.mult, &bcm2835_cs.shift,
> STC_FREQ_HZ, NSEC_PER_SEC, 60);
> +	return init_clock(&bcm2835_cs);
> +}
> +core_initcall(bcm2835_clocksource_init);
> +
> +static int bcm2835_clkdev_init(void)
> +{
> +	clkdev_add_table(clocks_lookups, ARRAY_SIZE(clocks_lookups));
> +	return 0;
> +}
> +postcore_initcall(bcm2835_clkdev_init);
> +
> +void bcm2835_register_uart(void)
> +{
> +	amba_apb_device_add(NULL, "uart-pl011", 0, UART0_BASE, 4096, NULL, 0);
> +}
> +
> +#define RESET_TIMEOUT 10
> +
> +void __noreturn reset_cpu (unsigned long addr)
> +{
> +	uint32_t rstc;
> +
> +    rstc = readl(PM_RSTC);
> +    rstc &= ~PM_RSTC_WRCFG_SET;
> +    rstc |= PM_RSTC_WRCFG_FULL_RESET;
> +    writel(PM_PASSWORD | RESET_TIMEOUT, PM_WDOG);
> +    writel(PM_PASSWORD | rstc, PM_RSTC);
> +}
> +EXPORT_SYMBOL(reset_cpu);
> diff --git a/arch/arm/mach-bcm2835/gpio.c b/arch/arm/mach-bcm2835/gpio.c
> new file mode 100644
> index 0000000..a62cda4
> --- /dev/null
> +++ b/arch/arm/mach-bcm2835/gpio.c
move to drivers/gpio

in a sperated patch
> @@ -0,0 +1,145 @@
> +/*
> + * Author: Carlo Caione <carlo@carlocaione.org>
> + *
> + * Based on linux/arch/arm/mach-bcm2708/bcm2708_gpio.c
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + *
> + */
> +
> +#include <common.h>
> +#include <errno.h>
> +#include <io.h>
> +#include <gpio.h>
> +#include <init.h>
> +#include <mach/platform.h>
> +
> +#define GPIOFSEL(x)  (0x00+(x)*4)
> +#define GPIOSET(x)   (0x1c+(x)*4)
> +#define GPIOCLR(x)   (0x28+(x)*4)
> +#define GPIOLEV(x)   (0x34+(x)*4)
> +#define GPIOEDS(x)   (0x40+(x)*4)
> +#define GPIOREN(x)   (0x4c+(x)*4)
> +#define GPIOFEN(x)   (0x58+(x)*4)
> +#define GPIOHEN(x)   (0x64+(x)*4)
> +#define GPIOLEN(x)   (0x70+(x)*4)
> +#define GPIOAREN(x)  (0x7c+(x)*4)
> +#define GPIOAFEN(x)  (0x88+(x)*4)
> +#define GPIOUD(x)    (0x94+(x)*4)
> +#define GPIOUDCLK(x) (0x98+(x)*4)
> +
> +enum { GPIO_FSEL_INPUT, GPIO_FSEL_OUTPUT,
> +	GPIO_FSEL_ALT5, GPIO_FSEL_ALT_4,
> +	GPIO_FSEL_ALT0, GPIO_FSEL_ALT1,
> +	GPIO_FSEL_ALT2, GPIO_FSEL_ALT3,
> +};
> +
> +struct bcm2835_gpio_chip {
> +	void __iomem *base;
> +	struct gpio_chip chip;
> +};
> +
> +static int bcm2835_set_function(struct gpio_chip *chip, unsigned
> gpio, int function)
> +{
> +	struct bcm2835_gpio_chip *imxgpio = container_of(chip, struct
> bcm2835_gpio_chip, chip);
> +	void __iomem *base = imxgpio->base;
> +	unsigned gpiodir;
> +	unsigned gpio_bank = gpio / 10;
> +	unsigned gpio_field_offset = (gpio - 10 * gpio_bank) * 3;
> +
> +	gpiodir = readl(base + GPIOFSEL(gpio_bank));
> +	gpiodir &= ~(7 << gpio_field_offset);
> +	gpiodir |= function << gpio_field_offset;
> +	writel(gpiodir, base + GPIOFSEL(gpio_bank));
> +	gpiodir = readl(base + GPIOFSEL(gpio_bank));
> +
> +	return 0;
> +}
> +
> +static void bcm2835_gpio_set_value(struct gpio_chip *chip, unsigned
> gpio, int value)
> +{
> +	struct bcm2835_gpio_chip *imxgpio = container_of(chip, struct
> bcm2835_gpio_chip, chip);
> +	void __iomem *base = imxgpio->base;
> +	unsigned gpio_bank = gpio / 32;
> +	unsigned gpio_field_offset = (gpio - 32 * gpio_bank);
% 32
> +
> +	if (value)
> +		writel(1 << gpio_field_offset, base + GPIOSET(gpio_bank));
> +	else
> +		writel(1 << gpio_field_offset, base + GPIOCLR(gpio_bank));
> +}
> +
> +static int bcm2835_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
> +{
> +	struct bcm2835_gpio_chip *bcmgpio = container_of(chip, struct
> bcm2835_gpio_chip, chip);
> +	void __iomem *base = bcmgpio->base;
> +	unsigned gpio_bank = gpio / 32;
> +	unsigned gpio_field_offset = gpio % 32;
> +	unsigned lev;
> +
> +	lev = readl(base + GPIOLEV(gpio_bank));
> +	return 0x1 & (lev >> gpio_field_offset);
> +}
> +
> +static int bcm2835_gpio_direction_input(struct gpio_chip *chip, unsigned gpio)
> +{
> +	return bcm2835_set_function(chip, gpio, GPIO_FSEL_INPUT);
> +}
> +
> +static int bcm2835_gpio_direction_output(struct gpio_chip *chip,
> unsigned gpio, int value)
> +{
> +	int ret;
> +	ret =  bcm2835_set_function(chip, gpio, GPIO_FSEL_OUTPUT);
> +	if (ret >= 0)
> +		bcm2835_gpio_set_value(chip, gpio, value);
> +	return ret;
> +}
> +
> +static struct gpio_ops bcm2835_gpio_ops = {
> +	.direction_input = bcm2835_gpio_direction_input,
> +	.direction_output = bcm2835_gpio_direction_output,
> +	.get = bcm2835_gpio_get_value,
> +	.set = bcm2835_gpio_set_value,
> +};
> +
> +static int bcm2835_gpio_probe(struct device_d *dev)
> +{
> +	struct bcm2835_gpio_chip *bcmgpio;
> +
> +	bcmgpio = xzalloc(sizeof(*bcmgpio));
> +	bcmgpio->base = dev_request_mem_region(dev, 0);
> +	bcmgpio->chip.ops = &bcm2835_gpio_ops;
> +	bcmgpio->chip.base = -1;
> +	bcmgpio->chip.ngpio = 54;
> +	bcmgpio->chip.dev = dev;
> +	gpiochip_add(&bcmgpio->chip);
check the return
> +
> +	dev_info(dev, "probed gpiochip%d with base %d\n", dev->id,
> bcmgpio->chip.base);
> +
> +	return 0;
> +}
> +
> +static struct driver_d bcm2835_gpio_driver = {
> +	.name = "bcm2835-gpio",
> +	.probe = bcm2835_gpio_probe,
> +};
> +
> +static int bcm2835_gpio_add(void)
> +{
> +	register_driver(&bcm2835_gpio_driver);
can not work

use platform_driver
> +	return 0;
> +}
> +coredevice_initcall(bcm2835_gpio_add);
> diff --git a/arch/arm/mach-bcm2835/include/mach/clkdev.h
> b/arch/arm/mach-bcm2835/include/mach/clkdev.h
> new file mode 100644
> index 0000000..04b37a8
> --- /dev/null
> +++ b/arch/arm/mach-bcm2835/include/mach/clkdev.h
> @@ -0,0 +1,7 @@
> +#ifndef __ASM_MACH_CLKDEV_H
> +#define __ASM_MACH_CLKDEV_H
> +
> +#define __clk_get(clk) ({ 1; })
> +#define __clk_put(clk) do { } while (0)
> +
> +#endif
> diff --git a/arch/arm/mach-bcm2835/include/mach/clock.h
> b/arch/arm/mach-bcm2835/include/mach/clock.h
> new file mode 100644
> index 0000000..a365a77
> --- /dev/null
> +++ b/arch/arm/mach-bcm2835/include/mach/clock.h
> @@ -0,0 +1,10 @@
> +#ifndef _BCM2708_CLOCK_H
> +#define _BCM2708_CLOCK_H
> +
> +int bcm2835_clk_create(struct clk *clk, const char *dev_id);
> +
> +struct clk {
> +	unsigned long rate;
> +};
> +
> +#endif
> \ No newline at end of file
> diff --git a/arch/arm/mach-bcm2835/include/mach/core.h
> b/arch/arm/mach-bcm2835/include/mach/core.h
> new file mode 100644
> index 0000000..e60d947
> --- /dev/null
> +++ b/arch/arm/mach-bcm2835/include/mach/core.h
> @@ -0,0 +1,27 @@
> +/*
> + * Copyright (C) 2009 Carlo Caione <carlo@carlocaione.org>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
> + * MA 02111-1307 USA
> + *
> + */
> +
> +#ifndef __BCM2835_CORE_H__
> +#define __BCM2835_CORE_H__
> +
> +void bcm2835_register_uart(void);
> +void bcm2835_add_device_sdram(u32 size);
> +
> +#endif
> diff --git a/arch/arm/mach-bcm2835/include/mach/gpio.h
> b/arch/arm/mach-bcm2835/include/mach/gpio.h
> new file mode 100644
> index 0000000..6d31d20
> --- /dev/null
> +++ b/arch/arm/mach-bcm2835/include/mach/gpio.h
> @@ -0,0 +1,9 @@
> +#ifndef _BCM2835_GPIO_H
> +#define _BCM2835_GPIO_H
> +
> +void gpio_set_value(unsigned gpio, int value);
> +int gpio_get_value(unsigned gpio);
> +int gpio_direction_output(unsigned gpio, int value);
> +int gpio_direction_input(unsigned gpio);
I'm sending asm-generic/gpio.h

include it here
> +
> +#endif /* _BCM2835_GPIO_H */
> diff --git a/arch/arm/mach-bcm2835/include/mach/platform.h
> b/arch/arm/mach-bcm2835/include/mach/platform.h
> new file mode 100644
> index 0000000..3b92005
> --- /dev/null
> +++ b/arch/arm/mach-bcm2835/include/mach/platform.h
> @@ -0,0 +1,207 @@
> +/*
> + * arch/arm/mach-bcm2708/include/mach/platform.h
> + *
> + * Copyright (C) 2010 Broadcom
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
> + */
> +
> +#ifndef _BCM2708_PLATFORM_H
> +#define _BCM2708_PLATFORM_H
> +
> +
> +
> +/*
> + *  SDRAM
> + */
> +#define BCM2708_SDRAM_BASE           0x00000000
and use tab for indent
> +
> +/*
> + *  Logic expansion modules
> + *
> + */
> +
> +
> +/*
> + * Definitions and addresses for the ARM CONTROL logic
> + * This file is manually generated.
> + */
> +
> +#define BCM2708_PERI_BASE        0x20000000
> +#define ST_BASE                  (BCM2708_PERI_BASE + 0x3000)   /*
> System Timer */
> +#define DMA_BASE		 (BCM2708_PERI_BASE + 0x7000)	/* DMA controller */
> +#define ARM_BASE                 (BCM2708_PERI_BASE + 0xB000)	 /*
> BCM2708 ARM control block */
> +#define PM_BASE			 (BCM2708_PERI_BASE + 0x100000) /* Power
> Management, Reset controller and Watchdog registers */
> +#define GPIO_BASE                (BCM2708_PERI_BASE + 0x200000) /* GPIO */
> +#define UART0_BASE               (BCM2708_PERI_BASE + 0x201000)	/* Uart 0 */
> +#define MMCI0_BASE               (BCM2708_PERI_BASE + 0x202000) /*
> MMC interface */
> +#define SPI0_BASE		 (BCM2708_PERI_BASE + 0x204000) /* SPI0 */
> +#define BSC0_BASE		 (BCM2708_PERI_BASE + 0x205000) /* BSC0 I2C/TWI */
> +#define UART1_BASE               (BCM2708_PERI_BASE + 0x215000) /* Uart 1 */
> +#define EMMC_BASE                (BCM2708_PERI_BASE + 0x300000) /*
> eMMC interface */
> +#define SMI_BASE		 (BCM2708_PERI_BASE + 0x600000) /* SMI */
> +#define BSC1_BASE		 (BCM2708_PERI_BASE + 0x804000) /* BSC1 I2C/TWI */
> +#define USB_BASE                 (BCM2708_PERI_BASE + 0x980000) /*
> DTC_OTG USB controller */
> +#define MCORE_BASE               (BCM2708_PERI_BASE + 0x0000)   /*
> Fake frame buffer device (actually the multicore sync block*/
> +
> +#define ARMCTRL_BASE             (ARM_BASE + 0x000)
> +#define ARMCTRL_IC_BASE          (ARM_BASE + 0x200)           /* ARM
> interrupt controller */
> +#define ARMCTRL_TIMER0_1_BASE    (ARM_BASE + 0x400)           /*
> Timer 0 and 1 */
> +#define ARMCTRL_0_SBM_BASE       (ARM_BASE + 0x800)           /* User
> 0 (ARM)'s Semaphores Doorbells and Mailboxes */
> +
> +
> +/*
> + * Interrupt assignments
> + */
> +
> +#define ARM_IRQ1_BASE                  0
> +#define INTERRUPT_TIMER0               (ARM_IRQ1_BASE + 0)
> +#define INTERRUPT_TIMER1               (ARM_IRQ1_BASE + 1)
> +#define INTERRUPT_TIMER2               (ARM_IRQ1_BASE + 2)
> +#define INTERRUPT_TIMER3               (ARM_IRQ1_BASE + 3)
> +#define INTERRUPT_CODEC0               (ARM_IRQ1_BASE + 4)
> +#define INTERRUPT_CODEC1               (ARM_IRQ1_BASE + 5)
> +#define INTERRUPT_CODEC2               (ARM_IRQ1_BASE + 6)
> +#define INTERRUPT_VC_JPEG              (ARM_IRQ1_BASE + 7)
> +#define INTERRUPT_ISP                  (ARM_IRQ1_BASE + 8)
> +#define INTERRUPT_VC_USB               (ARM_IRQ1_BASE + 9)
> +#define INTERRUPT_VC_3D                (ARM_IRQ1_BASE + 10)
> +#define INTERRUPT_TRANSPOSER           (ARM_IRQ1_BASE + 11)
> +#define INTERRUPT_MULTICORESYNC0       (ARM_IRQ1_BASE + 12)
> +#define INTERRUPT_MULTICORESYNC1       (ARM_IRQ1_BASE + 13)
> +#define INTERRUPT_MULTICORESYNC2       (ARM_IRQ1_BASE + 14)
> +#define INTERRUPT_MULTICORESYNC3       (ARM_IRQ1_BASE + 15)
> +#define INTERRUPT_DMA0                 (ARM_IRQ1_BASE + 16)
> +#define INTERRUPT_DMA1                 (ARM_IRQ1_BASE + 17)
> +#define INTERRUPT_VC_DMA2              (ARM_IRQ1_BASE + 18)
> +#define INTERRUPT_VC_DMA3              (ARM_IRQ1_BASE + 19)
> +#define INTERRUPT_DMA4                 (ARM_IRQ1_BASE + 20)
> +#define INTERRUPT_DMA5                 (ARM_IRQ1_BASE + 21)
> +#define INTERRUPT_DMA6                 (ARM_IRQ1_BASE + 22)
> +#define INTERRUPT_DMA7                 (ARM_IRQ1_BASE + 23)
> +#define INTERRUPT_DMA8                 (ARM_IRQ1_BASE + 24)
> +#define INTERRUPT_DMA9                 (ARM_IRQ1_BASE + 25)
> +#define INTERRUPT_DMA10                (ARM_IRQ1_BASE + 26)
> +#define INTERRUPT_DMA11                (ARM_IRQ1_BASE + 27)
> +#define INTERRUPT_DMA12                (ARM_IRQ1_BASE + 28)
> +#define INTERRUPT_AUX                (ARM_IRQ1_BASE + 29)
> +#define INTERRUPT_ARM                  (ARM_IRQ1_BASE + 30)
> +#define INTERRUPT_VPUDMA               (ARM_IRQ1_BASE + 31)
> +
> +#define ARM_IRQ2_BASE                  32
> +#define INTERRUPT_HOSTPORT             (ARM_IRQ2_BASE + 0)
> +#define INTERRUPT_VIDEOSCALER          (ARM_IRQ2_BASE + 1)
> +#define INTERRUPT_CCP2TX               (ARM_IRQ2_BASE + 2)
> +#define INTERRUPT_SDC                  (ARM_IRQ2_BASE + 3)
> +#define INTERRUPT_DSI0                 (ARM_IRQ2_BASE + 4)
> +#define INTERRUPT_AVE                  (ARM_IRQ2_BASE + 5)
> +#define INTERRUPT_CAM0                 (ARM_IRQ2_BASE + 6)
> +#define INTERRUPT_CAM1                 (ARM_IRQ2_BASE + 7)
> +#define INTERRUPT_HDMI0                (ARM_IRQ2_BASE + 8)
> +#define INTERRUPT_HDMI1                (ARM_IRQ2_BASE + 9)
> +#define INTERRUPT_PIXELVALVE1          (ARM_IRQ2_BASE + 10)
> +#define INTERRUPT_I2CSPISLV            (ARM_IRQ2_BASE + 11)
> +#define INTERRUPT_DSI1                 (ARM_IRQ2_BASE + 12)
> +#define INTERRUPT_PWA0                 (ARM_IRQ2_BASE + 13)
> +#define INTERRUPT_PWA1                 (ARM_IRQ2_BASE + 14)
> +#define INTERRUPT_CPR                  (ARM_IRQ2_BASE + 15)
> +#define INTERRUPT_SMI                  (ARM_IRQ2_BASE + 16)
> +#define INTERRUPT_GPIO0                (ARM_IRQ2_BASE + 17)
> +#define INTERRUPT_GPIO1                (ARM_IRQ2_BASE + 18)
> +#define INTERRUPT_GPIO2                (ARM_IRQ2_BASE + 19)
> +#define INTERRUPT_GPIO3                (ARM_IRQ2_BASE + 20)
> +#define INTERRUPT_VC_I2C               (ARM_IRQ2_BASE + 21)
> +#define INTERRUPT_VC_SPI               (ARM_IRQ2_BASE + 22)
> +#define INTERRUPT_VC_I2SPCM            (ARM_IRQ2_BASE + 23)
> +#define INTERRUPT_VC_SDIO              (ARM_IRQ2_BASE + 24)
> +#define INTERRUPT_VC_UART              (ARM_IRQ2_BASE + 25)
> +#define INTERRUPT_SLIMBUS              (ARM_IRQ2_BASE + 26)
> +#define INTERRUPT_VEC                  (ARM_IRQ2_BASE + 27)
> +#define INTERRUPT_CPG                  (ARM_IRQ2_BASE + 28)
> +#define INTERRUPT_RNG                  (ARM_IRQ2_BASE + 29)
> +#define INTERRUPT_VC_ARASANSDIO        (ARM_IRQ2_BASE + 30)
> +#define INTERRUPT_AVSPMON              (ARM_IRQ2_BASE + 31)
> +
> +#define ARM_IRQ0_BASE                  64
> +#define INTERRUPT_ARM_TIMER            (ARM_IRQ0_BASE + 0)
> +#define INTERRUPT_ARM_MAILBOX          (ARM_IRQ0_BASE + 1)
> +#define INTERRUPT_ARM_DOORBELL_0       (ARM_IRQ0_BASE + 2)
> +#define INTERRUPT_ARM_DOORBELL_1       (ARM_IRQ0_BASE + 3)
> +#define INTERRUPT_VPU0_HALTED          (ARM_IRQ0_BASE + 4)
> +#define INTERRUPT_VPU1_HALTED          (ARM_IRQ0_BASE + 5)
> +#define INTERRUPT_ILLEGAL_TYPE0        (ARM_IRQ0_BASE + 6)
> +#define INTERRUPT_ILLEGAL_TYPE1        (ARM_IRQ0_BASE + 7)
> +#define INTERRUPT_PENDING1             (ARM_IRQ0_BASE + 8)
> +#define INTERRUPT_PENDING2             (ARM_IRQ0_BASE + 9)
> +#define INTERRUPT_JPEG                 (ARM_IRQ0_BASE + 10)
> +#define INTERRUPT_USB                  (ARM_IRQ0_BASE + 11)
> +#define INTERRUPT_3D                   (ARM_IRQ0_BASE + 12)
> +#define INTERRUPT_DMA2                 (ARM_IRQ0_BASE + 13)
> +#define INTERRUPT_DMA3                 (ARM_IRQ0_BASE + 14)
> +#define INTERRUPT_I2C                  (ARM_IRQ0_BASE + 15)
> +#define INTERRUPT_SPI                  (ARM_IRQ0_BASE + 16)
> +#define INTERRUPT_I2SPCM               (ARM_IRQ0_BASE + 17)
> +#define INTERRUPT_SDIO                 (ARM_IRQ0_BASE + 18)
> +#define INTERRUPT_UART                 (ARM_IRQ0_BASE + 19)
> +#define INTERRUPT_ARASANSDIO           (ARM_IRQ0_BASE + 20)
> +
> +#define MAXIRQNUM                      (32 + 32 + 20)
> +#define MAXFIQNUM                      (32 + 32 + 20)
> +
> +#define MAX_TIMER                       2
> +#define MAX_PERIOD                      699050
> +#define TICKS_PER_uSEC                  1
> +
> +/*
> + *  These are useconds NOT ticks.
> + *
> + */
> +#define mSEC_1                          1000
> +#define mSEC_5                          (mSEC_1 * 5)
> +#define mSEC_10                         (mSEC_1 * 10)
> +#define mSEC_25                         (mSEC_1 * 25)
> +#define SEC_1                           (mSEC_1 * 1000)
> +
> +/*
> + * Watchdog
> + */
> +#define PM_RSTC			       (PM_BASE+0x1c)
> +#define PM_RSTS			       (PM_BASE+0x20)
> +#define PM_WDOG			       (PM_BASE+0x24)
> +
> +#define PM_WDOG_RESET                                         0000000000
> +#define PM_PASSWORD		       0x5a000000
> +#define PM_WDOG_TIME_SET	       0x000fffff
> +#define PM_RSTC_WRCFG_CLR              0xffffffcf
> +#define PM_RSTC_WRCFG_SET              0x00000030
> +#define PM_RSTC_WRCFG_FULL_RESET       0x00000020
> +#define PM_RSTC_RESET                  0x00000102
> +
> +#define PM_RSTS_HADPOR_SET                                 0x00001000
> +#define PM_RSTS_HADSRH_SET                                 0x00000400
> +#define PM_RSTS_HADSRF_SET                                 0x00000200
> +#define PM_RSTS_HADSRQ_SET                                 0x00000100
> +#define PM_RSTS_HADWRH_SET                                 0x00000040
> +#define PM_RSTS_HADWRF_SET                                 0x00000020
> +#define PM_RSTS_HADWRQ_SET                                 0x00000010
> +#define PM_RSTS_HADDRH_SET                                 0x00000004
> +#define PM_RSTS_HADDRF_SET                                 0x00000002
> +#define PM_RSTS_HADDRQ_SET                                 0x00000001
> +
> +#define UART0_CLOCK      3000000
no need
> +
> +#endif
> +
> +/* END */
> -- 
> 1.7.12.2
> 
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2012-10-05 10:32 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-10-05  8:47 Carlo Caione
2012-10-05 10:30 ` Jean-Christophe PLAGNIOL-VILLARD [this message]
2012-10-05 13:00 ` Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20121005103010.GQ26553@game.jcrosoft.org \
    --to=plagnioj@jcrosoft.com \
    --cc=barebox@lists.infradead.org \
    --cc=carlo.caione@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox