From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:6f8:1178:4:290:27ff:fe1d:cc33]) by merlin.infradead.org with esmtps (Exim 4.76 #1 (Red Hat Linux)) id 1TN0ai-0003Ug-Ql for barebox@lists.infradead.org; Sat, 13 Oct 2012 12:13:19 +0000 Date: Sat, 13 Oct 2012 14:13:14 +0200 From: Sascha Hauer Message-ID: <20121013121314.GV27665@pengutronix.de> References: <1349878154-7099-1-git-send-email-antonynpavlov@gmail.com> MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: <1349878154-7099-1-git-send-email-antonynpavlov@gmail.com> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: barebox-bounces@lists.infradead.org Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: [RFC v2] add 'miitool' command to view media-independent interface status To: Antony Pavlov Cc: barebox@lists.infradead.org Hi Antony, On Wed, Oct 10, 2012 at 06:09:14PM +0400, Antony Pavlov wrote: > This command is based on "mii-diag" and "mii-tool" programs. > > TODO: > * add GbE support (see http://ftp.debian.org/debian/pool/main/n/net-tools/net-tools_1.60-24.2.diff.gz); > * add routines to manipulate media-independent interface state. Looks good. Since it still has RFC state, should I apply it? Sascha > > EXAMPLES: > > barebox:/ miitool /dev/phy0 > negotiated 100baseTx-FD, link ok > > barebox:/ miitool -v /dev/phy0 > negotiated 100baseTx-FD, link ok > product info: Level One LXT971A rev 2 > basic mode: autonegotiation enabled > basic status: autonegotiation complete, link ok > capabilities: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD > advertising: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD > link partner: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD flow-control > > barebox:/ miitool -vv /dev/phy0 > negotiated 100baseTx-FD, link ok > registers for MII PHY: > 3100 782d 0013 78e2 01e1 45e1 0007 2001 > 0000 ffff ffff ffff ffff ffff ffff ffff > 0084 4780 0000 0000 0422 0000 0000 0000 > 0000 0000 0080 0000 ffff 0000 0000 3660 > product info: Level One LXT971A rev 2 > basic mode: autonegotiation enabled > basic status: autonegotiation complete, link ok > capabilities: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD > advertising: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD > link partner: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD flow-control > > Signed-off-by: Antony Pavlov > --- > commands/Kconfig | 11 +++ > commands/Makefile | 1 + > commands/miitool.c | 268 ++++++++++++++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 280 insertions(+) > create mode 100644 commands/miitool.c > > diff --git a/commands/Kconfig b/commands/Kconfig > index e934f29..c8cdd54 100644 > --- a/commands/Kconfig > +++ b/commands/Kconfig > @@ -620,6 +620,17 @@ config CMD_USB > help > The usb command allows to rescan for USB devices. > > +config CMD_MIITOOL > + bool > + prompt "miitool command" > + depends on NET > + help > + The miitool command allows to view media-independent interface status. > + The default short output reports the negotiated link speed and > + link status for selected MII. The '-v' option displays more > + detailed MII status information, such as MII capabilities, > + current advertising mode, and link partner capabilities. > + > config CMD_CLK > tristate > depends on COMMON_CLK > diff --git a/commands/Makefile b/commands/Makefile > index 610be55..c6416ca 100644 > --- a/commands/Makefile > +++ b/commands/Makefile > @@ -76,3 +76,4 @@ obj-$(CONFIG_CMD_READLINK) += readlink.o > obj-$(CONFIG_CMD_LN) += ln.o > obj-$(CONFIG_CMD_CLK) += clk.o > obj-$(CONFIG_CMD_TFTP) += tftp.o > +obj-$(CONFIG_CMD_MIITOOL) += miitool.o > diff --git a/commands/miitool.c b/commands/miitool.c > new file mode 100644 > index 0000000..3a9ac45 > --- /dev/null > +++ b/commands/miitool.c > @@ -0,0 +1,268 @@ > +/* > + * Copyright (C) 2012 Antony Pavlov > + * > + * This file is part of barebox. > + * See file CREDITS for list of people who contributed to this > + * project. > + * > + * This program is based on Donald Becker's "mii-diag" and > + * David A. Hinds' "mii-tool". > + * > + * mii-tool is written/copyright 2000 by David A. Hinds > + * > + * > + * mii-diag is written/copyright 1997-2000 by Donald Becker > + * > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 > + * as published by the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + */ > + > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > + > +static u16 mdio_read(int fd, int offset) > +{ > + int ret; > + u16 buf; > + > + ret = lseek(fd, offset << 1, SEEK_SET); > + if (ret < 0) > + return 0; > + > + ret = read(fd, &buf, sizeof(u16)); > + if (ret < 0) > + return 0; > + > + return buf; > +} > + > +/* Table of known MII's */ > +static const struct { > + u_short id1, id2; > + u_short mask1, mask2; > + char *name; > +} mii_id[] = { > + { 0x0013, 0x78e0, 0xffff, 0xfff0, "Level One LXT971A" }, > +}; > +#define NMII (sizeof(mii_id)/sizeof(mii_id[0])) > + > +const struct { > + char *name; > + u_short value; > +} media[] = { > + /* The order through 100baseT4 matches bits in the BMSR */ > + { "10baseT-HD", ADVERTISE_10HALF }, > + { "10baseT-FD", ADVERTISE_10FULL }, > + { "100baseTx-HD", ADVERTISE_100HALF }, > + { "100baseTx-FD", ADVERTISE_100FULL }, > + { "100baseT4", LPA_100BASE4 }, > + { "100baseTx", ADVERTISE_100FULL | ADVERTISE_100HALF }, > + { "10baseT", ADVERTISE_10FULL | ADVERTISE_10HALF }, > +}; > +#define NMEDIA (sizeof(media)/sizeof(media[0])) > + > +static char *media_list(int mask, int best) > +{ > + static char buf[100]; > + int i; > + > + *buf = '\0'; > + mask >>= 5; > + for (i = 4; i >= 0; i--) { > + if (mask & (1 << i)) { > + strcat(buf, " "); > + strcat(buf, media[i].name); > + if (best) > + break; > + } > + } > + > + if (mask & (1 << 5)) > + strcat(buf, " flow-control"); > + > + return buf; > +} > + > +static int show_basic_mii(int fd, int verbose) > +{ > + char buf[100]; > + int i, mii_val[32]; > + int bmcr, bmsr, advert, lkpar; > + > + /* Some bits in the BMSR are latched, but we can't rely on being > + the only reader, so only the current values are meaningful */ > + mdio_read(fd, MII_BMSR); > + for (i = 0; i < ((verbose > 1) ? 32 : 8); i++) > + mii_val[i] = mdio_read(fd, i); > + > + if (mii_val[MII_BMCR] == 0xffff) { > + fprintf(stderr, " No MII transceiver present!.\n"); > + return -1; > + } > + > + /* Descriptive rename. */ > + bmcr = mii_val[MII_BMCR]; > + bmsr = mii_val[MII_BMSR]; > + advert = mii_val[MII_ADVERTISE]; > + lkpar = mii_val[MII_LPA]; > + > + *buf = '\0'; > + if (bmcr & BMCR_ANENABLE) { > + if (bmsr & BMSR_ANEGCOMPLETE) { > + if (advert & lkpar) { > + sprintf(buf, "%s%s, ", (lkpar & LPA_LPACK) ? > + "negotiated" : "no autonegotiation,", > + media_list(advert & lkpar, 1)); > + } else { > + sprintf(buf, "autonegotiation failed, "); > + } > + } else if (bmcr & BMCR_ANRESTART) { > + sprintf(buf, "autonegotiation restarted, "); > + } > + } else { > + sprintf(buf, "%s Mbit, %s duplex, ", > + (bmcr & BMCR_SPEED100) ? "100" : "10", > + (bmcr & BMCR_FULLDPLX) ? "full" : "half"); > + } > + > + strcat(buf, (bmsr & BMSR_LSTATUS) ? "link ok" : "no link"); > + > + printf("%s\n", buf); > + > + if (verbose > 1) { > + printf(" registers for MII PHY: "); > + for (i = 0; i < 32; i++) > + printf("%s %4.4x", > + ((i % 8) ? "" : "\n "), mii_val[i]); > + > + printf("\n"); > + } > + > + if (verbose) { > + printf(" product info: "); > + for (i = 0; i < NMII; i++) > + if ((mii_id[i].id1 == (mii_val[2] & mii_id[i].mask1)) && > + (mii_id[i].id2 == > + (mii_val[3] & mii_id[i].mask2))) > + break; > + > + if (i < NMII) > + printf("%s rev %d\n", mii_id[i].name, mii_val[3]&0x0f); > + else > + printf("vendor %02x:%02x:%02x, model %d rev %d\n", > + mii_val[2] >> 10, (mii_val[2] >> 2) & 0xff, > + ((mii_val[2] << 6)|(mii_val[3] >> 10)) & 0xff, > + (mii_val[3] >> 4) & 0x3f, mii_val[3] & 0x0f); > + > + printf(" basic mode: "); > + if (bmcr & BMCR_RESET) > + printf("software reset, "); > + if (bmcr & BMCR_LOOPBACK) > + printf("loopback, "); > + if (bmcr & BMCR_ISOLATE) > + printf("isolate, "); > + if (bmcr & BMCR_CTST) > + printf("collision test, "); > + if (bmcr & BMCR_ANENABLE) { > + printf("autonegotiation enabled\n"); > + } else { > + printf("%s Mbit, %s duplex\n", > + (bmcr & BMCR_SPEED100) ? "100" : "10", > + (bmcr & BMCR_FULLDPLX) ? "full" : "half"); > + } > + printf(" basic status: "); > + if (bmsr & BMSR_ANEGCOMPLETE) > + printf("autonegotiation complete, "); > + else if (bmcr & BMCR_ANRESTART) > + printf("autonegotiation restarted, "); > + if (bmsr & BMSR_RFAULT) > + printf("remote fault, "); > + printf((bmsr & BMSR_LSTATUS) ? "link ok" : "no link"); > + printf("\n capabilities:%s", media_list(bmsr >> 6, 0)); > + printf("\n advertising: %s", media_list(advert, 0)); > + > +#define LPA_ABILITY_MASK (LPA_10HALF | LPA_10FULL \ > + | LPA_100HALF | LPA_100FULL \ > + | LPA_100BASE4 | LPA_PAUSE_CAP) > + > + if (lkpar & LPA_ABILITY_MASK) > + printf("\n link partner:%s", media_list(lkpar, 0)); > + printf("\n"); > + } > + > + return 0; > +} > + > +static int do_miitool(int argc, char *argv[]) > +{ > + char *filename; > + int opt; > + int argc_min; > + int fd; > + int verbose; > + > + verbose = 0; > + while ((opt = getopt(argc, argv, "v")) > 0) { > + switch (opt) { > + case 'v': > + verbose++; > + break; > + default: > + return COMMAND_ERROR_USAGE; > + } > + } > + > + argc_min = optind + 1; > + > + if (argc < argc_min) > + return COMMAND_ERROR_USAGE; > + > + filename = argv[optind]; > + > + fd = open(filename, O_RDONLY); > + if (fd < 0) { > + printf("unable to read %s\n", filename); > + return COMMAND_ERROR; > + } > + > + show_basic_mii(fd, verbose); > + > + close(fd); > + > + return COMMAND_SUCCESS; > +} > + > +BAREBOX_CMD_HELP_START(miitool) > +BAREBOX_CMD_HELP_USAGE("miitool [[[-v] -v] -v] \n") > +BAREBOX_CMD_HELP_SHORT("view status for MII .\n") > +BAREBOX_CMD_HELP_END > + > +/** > + * @page miitool_command > +This utility checks or sets the status of a network interface's > +Media Independent Interface (MII) unit. Most fast ethernet > +adapters use an MII to autonegotiate link speed and duplex setting. > + */ > +BAREBOX_CMD_START(miitool) > + .cmd = do_miitool, > + .usage = "view media-independent interface status", > + BAREBOX_CMD_HELP(cmd_miitool_help) > +BAREBOX_CMD_END > -- > 1.7.10.4 > > > _______________________________________________ > barebox mailing list > barebox@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/barebox > -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox