* [PATCH 1/5] ArchosG9: changed serial port and env
2012-10-13 14:03 [PATCH 0/5] archosg9: improve support for tablet Vicente
@ 2012-10-13 14:03 ` Vicente
2012-10-13 14:03 ` [PATCH 2/5] ARM: add/rename PSR bits to match linux names Vicente
` (4 subsequent siblings)
5 siblings, 0 replies; 12+ messages in thread
From: Vicente @ 2012-10-13 14:03 UTC (permalink / raw)
To: barebox; +Cc: Vicente
Signed-off-by: Vicente <vicencb@gmail.com>
---
arch/arm/boards/archosg9/env/config | 4 +++-
arch/arm/boards/archosg9/env/init/usbboot | 9 +++++----
arch/arm/configs/archosg9_defconfig | 2 +-
3 files changed, 9 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boards/archosg9/env/config b/arch/arm/boards/archosg9/env/config
index 38fc51c..8f3edb0 100644
--- a/arch/arm/boards/archosg9/env/config
+++ b/arch/arm/boards/archosg9/env/config
@@ -1 +1,3 @@
-global.linux.bootargs.base="earlyprintk=serial console=ttyO1,1000000n8 keep_bootcon pm_disable initcall_debug ignore_loglevel no_console_suspend=1 root=/dev/ram0 init=/linuxrc"
+global.bootm.image="${TARGET_ROOT}/boot/zImage"
+global.bootm.initrd="${TARGET_ROOT}/boot/initrd"
+global.linux.bootargs.base="console=ttyO0,115200n8 root=/dev/ram0"
diff --git a/arch/arm/boards/archosg9/env/init/usbboot b/arch/arm/boards/archosg9/env/init/usbboot
index 25536e2..83dd19a 100644
--- a/arch/arm/boards/archosg9/env/init/usbboot
+++ b/arch/arm/boards/archosg9/env/init/usbboot
@@ -1,5 +1,6 @@
-mkdir /usb
-mount -t omap4_usbbootfs omap4_usbboot /usb
+TARGET_ROOT="/mnt/usb"
+mkdir ${TARGET_ROOT}
+mount -t omap4_usbbootfs omap4_usbboot ${TARGET_ROOT}
. /env/config
-. /usb/boot/config
-bootm -r /usb/boot/initrd /usb/boot/zImage
+. ${TARGET_ROOT}/boot/config
+bootm
diff --git a/arch/arm/configs/archosg9_defconfig b/arch/arm/configs/archosg9_defconfig
index e598258..2a20dd7 100644
--- a/arch/arm/configs/archosg9_defconfig
+++ b/arch/arm/configs/archosg9_defconfig
@@ -55,7 +55,7 @@ CONFIG_CMD_I2C=y
CONFIG_DRIVER_SERIAL_OMAP4_USBBOOT=y
CONFIG_DRIVER_SERIAL_NS16550=y
CONFIG_DRIVER_SERIAL_NS16550_OMAP_EXTENSIONS=y
-CONFIG_BAUDRATE=1000000
+CONFIG_BAUDRATE=115200
# CONFIG_SPI is not set
CONFIG_I2C=y
CONFIG_I2C_OMAP=y
--
1.7.12.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 2/5] ARM: add/rename PSR bits to match linux names
2012-10-13 14:03 [PATCH 0/5] archosg9: improve support for tablet Vicente
2012-10-13 14:03 ` [PATCH 1/5] ArchosG9: changed serial port and env Vicente
@ 2012-10-13 14:03 ` Vicente
2012-10-13 18:25 ` Sascha Hauer
2012-10-13 14:03 ` [PATCH 3/5] ARM: ensure irqs are disabled at barebox exit Vicente
` (3 subsequent siblings)
5 siblings, 1 reply; 12+ messages in thread
From: Vicente @ 2012-10-13 14:03 UTC (permalink / raw)
To: barebox; +Cc: Vicente
Signed-off-by: Vicente <vicencb@gmail.com>
---
arch/arm/cpu/exceptions.S | 1 -
arch/arm/cpu/interrupts.c | 6 ++---
arch/arm/include/asm/ptrace.h | 55 +++++++++++++++++++++++--------------------
3 files changed, 33 insertions(+), 29 deletions(-)
diff --git a/arch/arm/cpu/exceptions.S b/arch/arm/cpu/exceptions.S
index fe63a37..115c4e5 100644
--- a/arch/arm/cpu/exceptions.S
+++ b/arch/arm/cpu/exceptions.S
@@ -35,7 +35,6 @@
#define S_R0 0
#define MODE_SVC 0x13
-#define I_BIT 0x80
/*
* use bad_save_user_regs for abort/prefetch/undef/swi ...
diff --git a/arch/arm/cpu/interrupts.c b/arch/arm/cpu/interrupts.c
index 4ed562f..6e60adc 100644
--- a/arch/arm/cpu/interrupts.c
+++ b/arch/arm/cpu/interrupts.c
@@ -57,9 +57,9 @@ void show_regs (struct pt_regs *regs)
printf ("r3 : %08lx r2 : %08lx r1 : %08lx r0 : %08lx\n",
regs->ARM_r3, regs->ARM_r2, regs->ARM_r1, regs->ARM_r0);
printf ("Flags: %c%c%c%c",
- flags & CC_N_BIT ? 'N' : 'n',
- flags & CC_Z_BIT ? 'Z' : 'z',
- flags & CC_C_BIT ? 'C' : 'c', flags & CC_V_BIT ? 'V' : 'v');
+ flags & PSR_N_BIT ? 'N' : 'n',
+ flags & PSR_Z_BIT ? 'Z' : 'z',
+ flags & PSR_C_BIT ? 'C' : 'c', flags & PSR_V_BIT ? 'V' : 'v');
printf (" IRQs %s FIQs %s Mode %s%s\n",
interrupts_enabled (regs) ? "on" : "off",
fast_interrupts_enabled (regs) ? "on" : "off",
diff --git a/arch/arm/include/asm/ptrace.h b/arch/arm/include/asm/ptrace.h
index b384369..ac065ab 100644
--- a/arch/arm/include/asm/ptrace.h
+++ b/arch/arm/include/asm/ptrace.h
@@ -23,25 +23,30 @@
/*
* PSR bits
*/
-#define USR26_MODE 0x00
-#define FIQ26_MODE 0x01
-#define IRQ26_MODE 0x02
-#define SVC26_MODE 0x03
-#define USR_MODE 0x10
-#define FIQ_MODE 0x11
-#define IRQ_MODE 0x12
-#define SVC_MODE 0x13
-#define ABT_MODE 0x17
-#define UND_MODE 0x1b
-#define SYSTEM_MODE 0x1f
-#define MODE_MASK 0x1f
-#define T_BIT 0x20
-#define F_BIT 0x40
-#define I_BIT 0x80
-#define CC_V_BIT (1 << 28)
-#define CC_C_BIT (1 << 29)
-#define CC_Z_BIT (1 << 30)
-#define CC_N_BIT (1 << 31)
+#define USR26_MODE 0x00000000
+#define FIQ26_MODE 0x00000001
+#define IRQ26_MODE 0x00000002
+#define SVC26_MODE 0x00000003
+#define USR_MODE 0x00000010
+#define FIQ_MODE 0x00000011
+#define IRQ_MODE 0x00000012
+#define SVC_MODE 0x00000013
+#define ABT_MODE 0x00000017
+#define UND_MODE 0x0000001b
+#define SYSTEM_MODE 0x0000001f
+#define MODE32_BIT 0x00000010
+#define MODE_MASK 0x0000001f
+#define PSR_T_BIT 0x00000020
+#define PSR_F_BIT 0x00000040
+#define PSR_I_BIT 0x00000080
+#define PSR_A_BIT 0x00000100
+#define PSR_E_BIT 0x00000200
+#define PSR_J_BIT 0x01000000
+#define PSR_Q_BIT 0x08000000
+#define PSR_V_BIT 0x10000000
+#define PSR_C_BIT 0x20000000
+#define PSR_Z_BIT 0x40000000
+#define PSR_N_BIT 0x80000000
#define PCMASK 0
#ifndef __ASSEMBLY__
@@ -79,7 +84,7 @@ struct pt_regs {
#ifdef CONFIG_ARM_THUMB
#define thumb_mode(regs) \
- (((regs)->ARM_cpsr & T_BIT))
+ (((regs)->ARM_cpsr & PSR_T_BIT))
#else
#define thumb_mode(regs) (0)
#endif
@@ -88,13 +93,13 @@ struct pt_regs {
((regs)->ARM_cpsr & MODE_MASK)
#define interrupts_enabled(regs) \
- (!((regs)->ARM_cpsr & I_BIT))
+ (!((regs)->ARM_cpsr & PSR_I_BIT))
#define fast_interrupts_enabled(regs) \
- (!((regs)->ARM_cpsr & F_BIT))
+ (!((regs)->ARM_cpsr & PSR_F_BIT))
#define condition_codes(regs) \
- ((regs)->ARM_cpsr & (CC_V_BIT|CC_C_BIT|CC_Z_BIT|CC_N_BIT))
+ ((regs)->ARM_cpsr & (PSR_V_BIT|PSR_C_BIT|PSR_Z_BIT|PSR_N_BIT))
/* Are the current registers suitable for user mode?
* (used to maintain security in signal handlers)
@@ -102,13 +107,13 @@ struct pt_regs {
static inline int valid_user_regs(struct pt_regs *regs)
{
if ((regs->ARM_cpsr & 0xf) == 0 &&
- (regs->ARM_cpsr & (F_BIT|I_BIT)) == 0)
+ (regs->ARM_cpsr & (PSR_F_BIT|PSR_I_BIT)) == 0)
return 1;
/*
* Force CPSR to something logical...
*/
- regs->ARM_cpsr &= (CC_V_BIT|CC_C_BIT|CC_Z_BIT|CC_N_BIT|0x10);
+ regs->ARM_cpsr &= (PSR_V_BIT|PSR_C_BIT|PSR_Z_BIT|PSR_N_BIT|0x10);
return 0;
}
--
1.7.12.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 2/5] ARM: add/rename PSR bits to match linux names
2012-10-13 14:03 ` [PATCH 2/5] ARM: add/rename PSR bits to match linux names Vicente
@ 2012-10-13 18:25 ` Sascha Hauer
0 siblings, 0 replies; 12+ messages in thread
From: Sascha Hauer @ 2012-10-13 18:25 UTC (permalink / raw)
To: Vicente; +Cc: barebox
On Sat, Oct 13, 2012 at 04:03:24PM +0200, Vicente wrote:
>
> Signed-off-by: Vicente <vicencb@gmail.com>
> ---
> arch/arm/cpu/exceptions.S | 1 -
> arch/arm/cpu/interrupts.c | 6 ++---
> arch/arm/include/asm/ptrace.h | 55 +++++++++++++++++++++++--------------------
> 3 files changed, 33 insertions(+), 29 deletions(-)
>
> /* Are the current registers suitable for user mode?
> * (used to maintain security in signal handlers)
> @@ -102,13 +107,13 @@ struct pt_regs {
> static inline int valid_user_regs(struct pt_regs *regs)
> {
> if ((regs->ARM_cpsr & 0xf) == 0 &&
> - (regs->ARM_cpsr & (F_BIT|I_BIT)) == 0)
> + (regs->ARM_cpsr & (PSR_F_BIT|PSR_I_BIT)) == 0)
> return 1;
>
> /*
> * Force CPSR to something logical...
> */
> - regs->ARM_cpsr &= (CC_V_BIT|CC_C_BIT|CC_Z_BIT|CC_N_BIT|0x10);
> + regs->ARM_cpsr &= (PSR_V_BIT|PSR_C_BIT|PSR_Z_BIT|PSR_N_BIT|0x10);
Since you are changing these lines anyway, could you add a whitespace
left and right to the operators to match our coding style?
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 3/5] ARM: ensure irqs are disabled at barebox exit
2012-10-13 14:03 [PATCH 0/5] archosg9: improve support for tablet Vicente
2012-10-13 14:03 ` [PATCH 1/5] ArchosG9: changed serial port and env Vicente
2012-10-13 14:03 ` [PATCH 2/5] ARM: add/rename PSR bits to match linux names Vicente
@ 2012-10-13 14:03 ` Vicente
2012-10-14 8:57 ` Sascha Hauer
2012-10-13 14:03 ` [PATCH 4/5] uimage: improve transfer speed Vicente
` (2 subsequent siblings)
5 siblings, 1 reply; 12+ messages in thread
From: Vicente @ 2012-10-13 14:03 UTC (permalink / raw)
To: barebox; +Cc: Vicente
Signed-off-by: Vicente <vicencb@gmail.com>
---
arch/arm/cpu/cpu.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm/cpu/cpu.c b/arch/arm/cpu/cpu.c
index 51da3b5..2bfd3ed 100644
--- a/arch/arm/cpu/cpu.c
+++ b/arch/arm/cpu/cpu.c
@@ -31,6 +31,7 @@
#include <asm/system_info.h>
#include <asm/cputype.h>
#include <asm/cache.h>
+#include <asm/ptrace.h>
/**
* Enable processor's instruction cache
@@ -78,6 +79,16 @@ void arch_shutdown(void)
mmu_disable();
#endif
flush_icache();
+ /*
+ * barebox normally does not use interrupts, but some functionalities
+ * (eg. OMAP4_USBBOOT) require them enabled. So be sure interrupts are
+ * disabled before exiting.
+ */
+#if __LINUX_ARM_ARCH__ >= 6
+ __asm__ __volatile__("cpsid i");
+#else
+ __asm__ __volatile__("msr cpsr_c, %0" : : "I"(PSR_I_BIT | SVC_MODE));
+#endif
}
#ifdef CONFIG_THUMB2_BAREBOX
--
1.7.12.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 3/5] ARM: ensure irqs are disabled at barebox exit
2012-10-13 14:03 ` [PATCH 3/5] ARM: ensure irqs are disabled at barebox exit Vicente
@ 2012-10-14 8:57 ` Sascha Hauer
0 siblings, 0 replies; 12+ messages in thread
From: Sascha Hauer @ 2012-10-14 8:57 UTC (permalink / raw)
To: Vicente; +Cc: barebox
On Sat, Oct 13, 2012 at 04:03:25PM +0200, Vicente wrote:
>
> Signed-off-by: Vicente <vicencb@gmail.com>
> ---
> arch/arm/cpu/cpu.c | 11 +++++++++++
> 1 file changed, 11 insertions(+)
>
> diff --git a/arch/arm/cpu/cpu.c b/arch/arm/cpu/cpu.c
> index 51da3b5..2bfd3ed 100644
> --- a/arch/arm/cpu/cpu.c
> +++ b/arch/arm/cpu/cpu.c
> @@ -31,6 +31,7 @@
> #include <asm/system_info.h>
> #include <asm/cputype.h>
> #include <asm/cache.h>
> +#include <asm/ptrace.h>
>
> /**
> * Enable processor's instruction cache
> @@ -78,6 +79,16 @@ void arch_shutdown(void)
> mmu_disable();
> #endif
> flush_icache();
> + /*
> + * barebox normally does not use interrupts, but some functionalities
> + * (eg. OMAP4_USBBOOT) require them enabled. So be sure interrupts are
> + * disabled before exiting.
> + */
> +#if __LINUX_ARM_ARCH__ >= 6
> + __asm__ __volatile__("cpsid i");
> +#else
> + __asm__ __volatile__("msr cpsr_c, %0" : : "I"(PSR_I_BIT | SVC_MODE));
> +#endif
This won't work with multi ARM architecture support and also does not
compile in Thumb2 mode. So I suggest to do:
diff --git a/arch/arm/cpu/cpu.c b/arch/arm/cpu/cpu.c
index 25a0893..1328f0e 100644
--- a/arch/arm/cpu/cpu.c
+++ b/arch/arm/cpu/cpu.c
@@ -87,6 +87,23 @@ void arch_shutdown(void)
: "r0", "r1", "r2", "r3", "r6", "r10", "r12", "lr", "cc", "memory"
);
#endif
+
+ /*
+ * barebox normally does not use interrupts, but some functionalities
+ * (eg. OMAP4_USBBOOT) require them enabled. So be sure interrupts are
+ * disabled before exiting.
+ */
+ if (cpu_architecture() >= CPU_ARCH_ARMv6) {
+#if __LINUX_ARM_ARCH__ >= 6
+ __asm__ __volatile__("cpsid i");
+#endif
+ } else {
+ uint32_t r;
+
+ __asm__ __volatile__("mrs %0, cpsr":"=r"(r));
+ r |= PSR_I_BIT;
+ __asm__ __volatile__("msr cpsr, %0" : : "r"(r));
+ }
}
#ifdef CONFIG_THUMB2_BAREBOX
Or the following which is simpler as it doesn't use the cpsid
instruction which is only available on >= ARMv6:
diff --git a/arch/arm/cpu/cpu.c b/arch/arm/cpu/cpu.c
index 25a0893..bfad49d 100644
--- a/arch/arm/cpu/cpu.c
+++ b/arch/arm/cpu/cpu.c
@@ -73,6 +73,8 @@ int icache_status(void)
*/
void arch_shutdown(void)
{
+ uint32_t r;
+
#ifdef CONFIG_MMU
/* nearly the same as below, but this could also disable
* second level cache.
@@ -87,6 +89,15 @@ void arch_shutdown(void)
: "r0", "r1", "r2", "r3", "r6", "r10", "r12", "lr", "cc", "memory"
);
#endif
+
+ /*
+ * barebox normally does not use interrupts, but some functionalities
+ * (eg. OMAP4_USBBOOT) require them enabled. So be sure interrupts are
+ * disabled before exiting.
+ */
+ __asm__ __volatile__("mrs %0, cpsr":"=r"(r));
+ r |= PSR_I_BIT;
+ __asm__ __volatile__("msr cpsr, %0" : : "r"(r));
}
#ifdef CONFIG_THUMB2_BAREBOX
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 4/5] uimage: improve transfer speed
2012-10-13 14:03 [PATCH 0/5] archosg9: improve support for tablet Vicente
` (2 preceding siblings ...)
2012-10-13 14:03 ` [PATCH 3/5] ARM: ensure irqs are disabled at barebox exit Vicente
@ 2012-10-13 14:03 ` Vicente
2012-10-13 14:03 ` [PATCH 5/5] omap4_usbboot_fs: add benchmarking capabilities Vicente
2012-10-13 14:19 ` [PATCH 0/5] archosg9: improve support for tablet Jean-Christophe PLAGNIOL-VILLARD
5 siblings, 0 replies; 12+ messages in thread
From: Vicente @ 2012-10-13 14:03 UTC (permalink / raw)
To: barebox; +Cc: Vicente
Signed-off-by: Vicente <vicencb@gmail.com>
---
common/uimage.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/common/uimage.c b/common/uimage.c
index c72db41..b58dff1 100644
--- a/common/uimage.c
+++ b/common/uimage.c
@@ -373,7 +373,7 @@ static int uimage_sdram_flush(void *buf, unsigned int len)
return len;
}
-#define BUFSIZ (PAGE_SIZE * 2)
+#define BUFSIZ (PAGE_SIZE * 32)
struct resource *file_to_sdram(const char *filename, unsigned long adr)
{
--
1.7.12.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 12+ messages in thread
* [PATCH 5/5] omap4_usbboot_fs: add benchmarking capabilities
2012-10-13 14:03 [PATCH 0/5] archosg9: improve support for tablet Vicente
` (3 preceding siblings ...)
2012-10-13 14:03 ` [PATCH 4/5] uimage: improve transfer speed Vicente
@ 2012-10-13 14:03 ` Vicente
2012-10-13 18:27 ` Sascha Hauer
2012-10-13 14:19 ` [PATCH 0/5] archosg9: improve support for tablet Jean-Christophe PLAGNIOL-VILLARD
5 siblings, 1 reply; 12+ messages in thread
From: Vicente @ 2012-10-13 14:03 UTC (permalink / raw)
To: barebox; +Cc: Vicente
Signed-off-by: Vicente <vicencb@gmail.com>
---
scripts/Makefile | 2 +-
scripts/omap4_usbboot.c | 32 ++++++++++++++++++++++++++++++--
2 files changed, 31 insertions(+), 3 deletions(-)
diff --git a/scripts/Makefile b/scripts/Makefile
index 08b325c..f3e797c 100644
--- a/scripts/Makefile
+++ b/scripts/Makefile
@@ -13,7 +13,7 @@ hostprogs-$(CONFIG_ARCH_OMAP) += omap_signGP mk-am35xx-spi-image
hostprogs-$(CONFIG_ARCH_S5PCxx) += s5p_cksum
hostprogs-$(CONFIG_ARCH_DAVINCI) += mkublheader
-HOSTLOADLIBES_omap4_usbboot = -lpthread
+HOSTLOADLIBES_omap4_usbboot = -lpthread -lrt
omap4_usbboot-objs := usb_linux.o omap4_usbboot.o
hostprogs-$(CONFIG_OMAP4_USBBOOT)+= omap4_usbboot
diff --git a/scripts/omap4_usbboot.c b/scripts/omap4_usbboot.c
index a276c29..e142c8a 100644
--- a/scripts/omap4_usbboot.c
+++ b/scripts/omap4_usbboot.c
@@ -20,9 +20,11 @@
#include <sys/mman.h>
#include <pthread.h>
#include <termios.h>
-
+#include <time.h>
#include "usb.h"
+#undef BENCHMARK
+
#define USBBOOT_FS_MAGIC 0x5562464D
#define USBBOOT_FS_CMD_OPEN 0x46530000
#define USBBOOT_FS_CMD_CLOSE 0x46530001
@@ -166,6 +168,10 @@ int read_asic_id(struct usb_handle *usb)
struct file_data {
size_t size;
void *data;
+#ifdef BENCHMARK
+ size_t readden;
+ struct timespec opened;
+#endif
};
int process_file(
@@ -175,7 +181,10 @@ int process_file(
struct stat s;
int fd, ret;
char fname[256];
-
+#ifdef BENCHMARK
+ struct timespec closed;
+ double ts;
+#endif
if (usb_read(usb, &i, 4) != 4) {
host_print("USB error\n");
exit(1);
@@ -229,6 +238,10 @@ int process_file(
close(fd);
fd_vector[i].size = size = s.st_size;
fd = i;
+#ifdef BENCHMARK
+ fd_vector[i].readden = 0;
+ clock_gettime(CLOCK_REALTIME, &fd_vector[i].opened);
+#endif
goto open_ok;
open_error_2:
@@ -266,6 +279,18 @@ open_ok:
}
munmap(fd_vector[i].data, fd_vector[i].size);
fd_vector[i].data = NULL;
+#ifdef BENCHMARK
+ if (fd_vector[i].readden) {
+ clock_gettime(CLOCK_REALTIME, &closed);
+ ts = closed.tv_nsec - fd_vector[i].opened.tv_nsec;
+ ts /= 1.e9;
+ ts += closed.tv_sec - fd_vector[i].opened.tv_sec ;
+ host_print("Transferred %lu bytes"
+ "in %.2f seconds at %.2f MBps\n",
+ fd_vector[i].readden, ts,
+ fd_vector[i].readden/ts/1048576.0);
+ }
+#endif
break;
case USBBOOT_FS_CMD_READ:
if (usb_read(usb, &i, 4) != 4) {
@@ -308,6 +333,9 @@ open_ok:
host_print("could not send file to target\n");
exit(1);
}
+#ifdef BENCHMARK
+ fd_vector[i].readden += size;
+#endif
break;
case USBBOOT_FS_CMD_END:
default:
--
1.7.12.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 0/5] archosg9: improve support for tablet
2012-10-13 14:03 [PATCH 0/5] archosg9: improve support for tablet Vicente
` (4 preceding siblings ...)
2012-10-13 14:03 ` [PATCH 5/5] omap4_usbboot_fs: add benchmarking capabilities Vicente
@ 2012-10-13 14:19 ` Jean-Christophe PLAGNIOL-VILLARD
2012-10-13 14:35 ` vj
5 siblings, 1 reply; 12+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2012-10-13 14:19 UTC (permalink / raw)
To: Vicente; +Cc: barebox
HI,
can you use your REAL NAME please
Best Regards,
J.
On 16:03 Sat 13 Oct , Vicente wrote:
>
> This patch series solves/improves/implements:
> ttyOxxx are 0 based, so change ttyO1 to ttyO0
> change speed to 115200, there are some issues at Mbaud speed in linux
> make the archos environment more flexible: initrd and zImage names are overwritable
> added definition of PSR_I_BIT and some others, remaining PSR bits renamed to match the linux ones
> disable interrupts at barebox exit
> speed up initrd transfer
> add option to benchmark file transfers
>
> Thank you all for your review work:
> Sascha Hauer
> Jean-Christophe
> Antony Pavlov
> Teresa Gamez
> Which is greatly appreciated.
>
> I also want to thank scholbert for the information posted in this forum thread:
> http://forum.xda-developers.com/showpost.php?p=25919128&postcount=4
>
> Vicente (5):
> ArchosG9: changed serial port and env
> ARM: add/rename PSR bits to match linux names
> ARM: ensure irqs are disabled at barebox exit
> uimage: improve transfer speed
> omap4_usbboot_fs: add benchmarking capabilities
>
> arch/arm/boards/archosg9/env/config | 4 ++-
> arch/arm/boards/archosg9/env/init/usbboot | 9 ++---
> arch/arm/configs/archosg9_defconfig | 2 +-
> arch/arm/cpu/cpu.c | 11 +++++++
> arch/arm/cpu/exceptions.S | 1 -
> arch/arm/cpu/interrupts.c | 6 ++--
> arch/arm/include/asm/ptrace.h | 55 +++++++++++++++++--------------
> common/uimage.c | 2 +-
> scripts/Makefile | 2 +-
> scripts/omap4_usbboot.c | 32 ++++++++++++++++--
> 10 files changed, 85 insertions(+), 39 deletions(-)
>
> --
> 1.7.12.2
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [PATCH 0/5] archosg9: improve support for tablet
2012-10-13 14:19 ` [PATCH 0/5] archosg9: improve support for tablet Jean-Christophe PLAGNIOL-VILLARD
@ 2012-10-13 14:35 ` vj
2012-10-14 8:12 ` [SPAM] " Jean-Christophe PLAGNIOL-VILLARD
0 siblings, 1 reply; 12+ messages in thread
From: vj @ 2012-10-13 14:35 UTC (permalink / raw)
To: Jean-Christophe PLAGNIOL-VILLARD; +Cc: barebox
On Sat, Oct 13, 2012 at 4:19 PM, Jean-Christophe PLAGNIOL-VILLARD
<plagnioj@jcrosoft.com> wrote:
> HI,
>
> can you use your REAL NAME please
>
> Best Regards,
> J.
This project is my first time I'm using git to send e-mails. The first
e-mails were sent (as default) with
my nickname (vj).
Then I realized that was incorrect and changed it to my real name: Vicente.
On the other hand there are the e-mails directly sent from gmail that
uses my nickname vj. I prefer
not changing this because it's my personal e-mail and has other uses
besides posting to mailing lists.
Maybe I should use another, more professional, e-mail address.
Best Regards,
Vicente Jaime Bergas Villalonga.
> On 16:03 Sat 13 Oct , Vicente wrote:
>>
>> This patch series solves/improves/implements:
>> ttyOxxx are 0 based, so change ttyO1 to ttyO0
>> change speed to 115200, there are some issues at Mbaud speed in linux
>> make the archos environment more flexible: initrd and zImage names are overwritable
>> added definition of PSR_I_BIT and some others, remaining PSR bits renamed to match the linux ones
>> disable interrupts at barebox exit
>> speed up initrd transfer
>> add option to benchmark file transfers
>>
>> Thank you all for your review work:
>> Sascha Hauer
>> Jean-Christophe
>> Antony Pavlov
>> Teresa Gamez
>> Which is greatly appreciated.
>>
>> I also want to thank scholbert for the information posted in this forum thread:
>> http://forum.xda-developers.com/showpost.php?p=25919128&postcount=4
>>
>> Vicente (5):
>> ArchosG9: changed serial port and env
>> ARM: add/rename PSR bits to match linux names
>> ARM: ensure irqs are disabled at barebox exit
>> uimage: improve transfer speed
>> omap4_usbboot_fs: add benchmarking capabilities
>>
>> arch/arm/boards/archosg9/env/config | 4 ++-
>> arch/arm/boards/archosg9/env/init/usbboot | 9 ++---
>> arch/arm/configs/archosg9_defconfig | 2 +-
>> arch/arm/cpu/cpu.c | 11 +++++++
>> arch/arm/cpu/exceptions.S | 1 -
>> arch/arm/cpu/interrupts.c | 6 ++--
>> arch/arm/include/asm/ptrace.h | 55 +++++++++++++++++--------------
>> common/uimage.c | 2 +-
>> scripts/Makefile | 2 +-
>> scripts/omap4_usbboot.c | 32 ++++++++++++++++--
>> 10 files changed, 85 insertions(+), 39 deletions(-)
>>
>> --
>> 1.7.12.2
>>
>>
>> _______________________________________________
>> barebox mailing list
>> barebox@lists.infradead.org
>> http://lists.infradead.org/mailman/listinfo/barebox
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: [SPAM] Re: [PATCH 0/5] archosg9: improve support for tablet
2012-10-13 14:35 ` vj
@ 2012-10-14 8:12 ` Jean-Christophe PLAGNIOL-VILLARD
0 siblings, 0 replies; 12+ messages in thread
From: Jean-Christophe PLAGNIOL-VILLARD @ 2012-10-14 8:12 UTC (permalink / raw)
To: vj; +Cc: barebox
On 16:35 Sat 13 Oct , vj wrote:
> On Sat, Oct 13, 2012 at 4:19 PM, Jean-Christophe PLAGNIOL-VILLARD
> <plagnioj@jcrosoft.com> wrote:
> > HI,
> >
> > can you use your REAL NAME please
> >
> > Best Regards,
> > J.
>
> This project is my first time I'm using git to send e-mails. The first
> e-mails were sent (as default) with
> my nickname (vj).
> Then I realized that was incorrect and changed it to my real name: Vicente.
>
> On the other hand there are the e-mails directly sent from gmail that
> uses my nickname vj. I prefer
> not changing this because it's my personal e-mail and has other uses
> besides posting to mailing lists.
> Maybe I should use another, more professional, e-mail address.
the e-mail we don't care we about your ame given + familly in the Author of
the commit
Best Regards,
J.
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 12+ messages in thread