mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: barebox@lists.infradead.org
Subject: Re: [PATCH 0/2 v2] add bus device
Date: Thu, 15 Nov 2012 11:11:09 +0100	[thread overview]
Message-ID: <20121115101109.GD31820@game.jcrosoft.org> (raw)
In-Reply-To: <20121103150823.GY29599@game.jcrosoft.org>

ping
On 16:08 Sat 03 Nov     , Jean-Christophe PLAGNIOL-VILLARD wrote:
> Hi,
> 
> The following changes since commit 37b37cb2bff79f4edbbcaf316149d814e11a358e:
> 
>   eth: register device a pure device (2012-11-03 07:48:12 +0800)
> 
> are available in the git repository at:
> 
>   git://git.jcrosoft.org/barebox.git tags/bus_device
> 
> for you to fetch changes up to 35f8933bf003b5049131487882d8ae57a1a50d3a:
> 
>   bus: add bus device (2012-11-03 07:52:49 +0800)
> 
> ----------------------------------------------------------------
> add bus device
> 
> This patch serie add a pure device for each bus
> 
> And set this device to each bus device as a parent if the device
> does not have a parent already
> 
> we have now a nice output per bus
> 
> barebox@Atmel at91sam9x5-ek:/
> devices:
> `---- platform
>      `---- atmel_usart0
>           `---- cs0
>      `---- atmel_usart1
>           `---- cs1
>      `---- mem0
>           `---- 0x00000000-0x07ffffff: /dev/ram0
>      `---- mem1
>           `---- 0x00000000-0x00007fff: /dev/sram0
>      `---- mem2
>           `---- 0x00000000-0x000037bf: /dev/defaultenv
>      `---- mem3
>           `---- 0x00000000-0xfffffffe: /dev/mem
>      `---- cs2
>      `---- w1-gpio
>           `---- w1_bus0
>                `---- w1-2d-0
>                     `---- 0x00000000-0x0000007f: /dev/ds24310
>                `---- w1-2d-1
>                     `---- 0x00000000-0x0000007f: /dev/ds24311
>                `---- w1-23-0
>                     `---- 0x00000000-0x000001ff: /dev/ds24330
>      `---- at91sam9x5cm
>      `---- at91sam9x5ek
>      `---- at91sam9x5dm
>      `---- atmel_nand0
>           `---- nand0
>                `---- 0x00000000-0x1fffffff: /dev/nand0
>                `---- 0x00000000-0x0003ffff: /dev/at91bootstrap_raw
>                `---- 0x00040000-0x0009ffff: /dev/self_raw
>                `---- 0x000a0000-0x000bffff: /dev/env_raw
>                `---- 0x000c0000-0x000dffff: /dev/env_raw1
>                `---- 0x00000000-0x0003ffff: /dev/nand0.at91bootstrap
>                `---- 0x00040000-0x0009ffff: /dev/nand0.barebox
>                `---- 0x000a0000-0x000bffff: /dev/nand0.bareboxenv
>                `---- 0x000c0000-0x000dffff: /dev/nand0.bareboxenv2
>                `---- 0x000e0000-0x000fffff: /dev/nand0.oftree
>                `---- 0x00100000-0x001fffff: /dev/nand0.free
>                `---- 0x00200000-0x007fffff: /dev/nand0.kernel
>                `---- 0x00800000-0x07ffffff: /dev/nand0.rootfs
>                `---- 0x08000000-0x1fffffff: /dev/nand0.data
>      `---- macb0
>           `---- miibus0
>           `---- eth0
>      `---- atmel_spi0
>           `---- mtd_dataflash0
>                     `---- 0x00000000-0x0041ffff: /dev/dataflash0
>      `---- atmel_mci0
>           `---- mci0
>                `---- 0x00000000-0x1d9bfffff: /dev/disk0
>                `---- 0x00100000-0x064fffff: /dev/disk0.0
>                `---- 0x06500000-0x1d9bfffff: /dev/disk0.1
>      `---- i2c-gpio0
>           `---- i2c0
>                `---- qt10700
>                     `---- cs3
> `---- mdio_bus
> `---- spi
> `---- i2c
> `---- w1_bus
> `---- fs
>      `---- ramfs0
>      `---- devfs0
> `---- net
> `---- global
> 
> drivers:
> atmel_usart
> ramfs
> devfs
> fat
> macb
> Generic PHY
> atmel_nand
> mtd_dataflash
> m25p80
> atmel_spi
> i2c-gpio
> mci
> atmel_mci
> qt1070
> w1-gpio
> ds2431
> ds2433
> mem
> 
> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
> 
> ----------------------------------------------------------------
> Jean-Christophe PLAGNIOL-VILLARD (2):
>       bus_for_each_device/bus_for_each_driver: add () to allow use &bus
>       bus: add bus device
> 
>  drivers/base/bus.c    |   10 ++++++++++
>  drivers/base/driver.c |    5 +++++
>  include/driver.h      |    6 ++++--
>  3 files changed, 19 insertions(+), 2 deletions(-)
> 
> Best Regards,
> J.
> 
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2012-11-15 10:13 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-11-03 15:08 Jean-Christophe PLAGNIOL-VILLARD
2012-11-03 15:11 ` [PATCH 1/2] bus_for_each_device/bus_for_each_driver: add () to allow use &bus Jean-Christophe PLAGNIOL-VILLARD
2012-11-03 15:11   ` [PATCH 2/2] bus: add bus device Jean-Christophe PLAGNIOL-VILLARD
2012-11-15 10:11 ` Jean-Christophe PLAGNIOL-VILLARD [this message]
2012-11-19 10:36 ` [PATCH 0/2 v2] " Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20121115101109.GD31820@game.jcrosoft.org \
    --to=plagnioj@jcrosoft.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox