From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:6f8:1178:4:290:27ff:fe1d:cc33]) by merlin.infradead.org with esmtps (Exim 4.76 #1 (Red Hat Linux)) id 1TYxdJ-0002v5-3L for barebox@lists.infradead.org; Thu, 15 Nov 2012 11:29:22 +0000 Date: Thu, 15 Nov 2012 12:29:19 +0100 From: Sascha Hauer Message-ID: <20121115112919.GB10369@pengutronix.de> References: <1352971904-12409-1-git-send-email-plagnioj@jcrosoft.com> <1352971904-12409-2-git-send-email-plagnioj@jcrosoft.com> MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: <1352971904-12409-2-git-send-email-plagnioj@jcrosoft.com> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: barebox-bounces@lists.infradead.org Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: [PATCH 2/2] phy: add smsc phy driver support To: Jean-Christophe PLAGNIOL-VILLARD Cc: barebox@lists.infradead.org On Thu, Nov 15, 2012 at 10:31:44AM +0100, Jean-Christophe PLAGNIOL-VILLARD wrote: > as we to have specific phy init to fix chip issue link detection support > > based on linux 3.6 > > Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD The driver is never used here, because the generic phy is probed first. For this to work we somehow have to make sure that the generic phy is probed last. Sascha > --- > drivers/net/phy/Kconfig | 5 ++ > drivers/net/phy/Makefile | 1 + > drivers/net/phy/smsc.c | 146 ++++++++++++++++++++++++++++++++++++++++++++++ > include/linux/smscphy.h | 25 ++++++++ > 4 files changed, 177 insertions(+) > create mode 100644 drivers/net/phy/smsc.c > create mode 100644 include/linux/smscphy.h > > diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig > index b66261a..616b539 100644 > --- a/drivers/net/phy/Kconfig > +++ b/drivers/net/phy/Kconfig > @@ -14,4 +14,9 @@ config GENERIC_PHY > > endif > > +config SMSC_PHY > + bool "Drivers for SMSC PHYs" > + ---help--- > + Currently supports the LAN83C185, LAN8187 and LAN8700 PHYs > + > endmenu > diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile > index 82e90d4..0caeb70 100644 > --- a/drivers/net/phy/Makefile > +++ b/drivers/net/phy/Makefile > @@ -1,2 +1,3 @@ > obj-y += phy.o mdio_bus.o > obj-$(CONFIG_GENERIC_PHY) += generic.o > +obj-$(CONFIG_SMSC_PHY) += smsc.o > diff --git a/drivers/net/phy/smsc.c b/drivers/net/phy/smsc.c > new file mode 100644 > index 0000000..3c201f6 > --- /dev/null > +++ b/drivers/net/phy/smsc.c > @@ -0,0 +1,146 @@ > +/* > + * drivers/net/phy/smsc.c > + * > + * Driver for SMSC PHYs > + * > + * Author: Herbert Valerio Riedel > + * > + * Copyright (c) 2006 Herbert Valerio Riedel > + * > + * This program is free software; you can redistribute it and/or modify it > + * under the terms of the GNU General Public License as published by the > + * Free Software Foundation; either version 2 of the License, or (at your > + * option) any later version. > + * > + * Support added for SMSC LAN8187 and LAN8700 by steve.glendinning@shawell.net > + * > + */ > + > +#include > +#include > +#include > +#include > +#include > +#include > + > +static int smsc_phy_ack_interrupt(struct phy_device *phydev) > +{ > + int rc = phy_read (phydev, MII_LAN83C185_ISF); > + > + return rc < 0 ? rc : 0; > +} > + > +static int smsc_phy_config_init(struct phy_device *phydev) > +{ > + int rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS); > + if (rc < 0) > + return rc; > + > + /* Enable energy detect mode for this SMSC Transceivers */ > + rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS, > + rc | MII_LAN83C185_EDPWRDOWN); > + if (rc < 0) > + return rc; > + > + return smsc_phy_ack_interrupt (phydev); > +} > + > +static int lan87xx_config_init(struct phy_device *phydev) > +{ > + /* > + * Make sure the EDPWRDOWN bit is NOT set. Setting this bit on > + * LAN8710/LAN8720 PHY causes the PHY to misbehave, likely due > + * to a bug on the chip. > + * > + * When the system is powered on with the network cable being > + * disconnected all the way until after ifconfig ethX up is > + * issued for the LAN port with this PHY, connecting the cable > + * afterwards does not cause LINK change detection, while the > + * expected behavior is the Link UP being detected. > + */ > + int rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS); > + if (rc < 0) > + return rc; > + > + rc &= ~MII_LAN83C185_EDPWRDOWN; > + > + rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS, rc); > + if (rc < 0) > + return rc; > + > + return smsc_phy_ack_interrupt(phydev); > +} > + > +static int lan911x_config_init(struct phy_device *phydev) > +{ > + return smsc_phy_ack_interrupt(phydev); > +} > + > +static struct phy_driver smsc_phy_driver[] = { > +{ > + .phy_id = 0x0007c0a0, /* OUI=0x00800f, Model#=0x0a */ > + .phy_id_mask = 0xfffffff0, > + .drv.name = "SMSC LAN83C185", > + > + .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause > + | SUPPORTED_Asym_Pause), > + > + /* basic functions */ > + .config_aneg = genphy_config_aneg, > + .read_status = genphy_read_status, > + .config_init = smsc_phy_config_init, > +}, { > + .phy_id = 0x0007c0b0, /* OUI=0x00800f, Model#=0x0b */ > + .phy_id_mask = 0xfffffff0, > + .drv.name = "SMSC LAN8187", > + > + .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause > + | SUPPORTED_Asym_Pause), > + > + /* basic functions */ > + .config_aneg = genphy_config_aneg, > + .read_status = genphy_read_status, > + .config_init = smsc_phy_config_init, > +}, { > + .phy_id = 0x0007c0c0, /* OUI=0x00800f, Model#=0x0c */ > + .phy_id_mask = 0xfffffff0, > + .drv.name = "SMSC LAN8700", > + > + .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause > + | SUPPORTED_Asym_Pause), > + > + /* basic functions */ > + .config_aneg = genphy_config_aneg, > + .read_status = genphy_read_status, > + .config_init = smsc_phy_config_init, > +}, { > + .phy_id = 0x0007c0d0, /* OUI=0x00800f, Model#=0x0d */ > + .phy_id_mask = 0xfffffff0, > + .drv.name = "SMSC LAN911x Internal PHY", > + > + .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause > + | SUPPORTED_Asym_Pause), > + > + /* basic functions */ > + .config_aneg = genphy_config_aneg, > + .read_status = genphy_read_status, > + .config_init = lan911x_config_init, > +}, { > + .phy_id = 0x0007c0f0, /* OUI=0x00800f, Model#=0x0f */ > + .phy_id_mask = 0xfffffff0, > + .drv.name = "SMSC LAN8710/LAN8720", > + > + .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause > + | SUPPORTED_Asym_Pause), > + > + /* basic functions */ > + .config_aneg = genphy_config_aneg, > + .read_status = genphy_read_status, > + .config_init = lan87xx_config_init, > +} }; > + > +static int __init smsc_init(void) > +{ > + return phy_drivers_register(smsc_phy_driver, ARRAY_SIZE(smsc_phy_driver)); > +} > +device_initcall(smsc_init); > diff --git a/include/linux/smscphy.h b/include/linux/smscphy.h > new file mode 100644 > index 0000000..ce718cb > --- /dev/null > +++ b/include/linux/smscphy.h > @@ -0,0 +1,25 @@ > +#ifndef __LINUX_SMSCPHY_H__ > +#define __LINUX_SMSCPHY_H__ > + > +#define MII_LAN83C185_ISF 29 /* Interrupt Source Flags */ > +#define MII_LAN83C185_IM 30 /* Interrupt Mask */ > +#define MII_LAN83C185_CTRL_STATUS 17 /* Mode/Status Register */ > + > +#define MII_LAN83C185_ISF_INT1 (1<<1) /* Auto-Negotiation Page Received */ > +#define MII_LAN83C185_ISF_INT2 (1<<2) /* Parallel Detection Fault */ > +#define MII_LAN83C185_ISF_INT3 (1<<3) /* Auto-Negotiation LP Ack */ > +#define MII_LAN83C185_ISF_INT4 (1<<4) /* Link Down */ > +#define MII_LAN83C185_ISF_INT5 (1<<5) /* Remote Fault Detected */ > +#define MII_LAN83C185_ISF_INT6 (1<<6) /* Auto-Negotiation complete */ > +#define MII_LAN83C185_ISF_INT7 (1<<7) /* ENERGYON */ > + > +#define MII_LAN83C185_ISF_INT_ALL (0x0e) > + > +#define MII_LAN83C185_ISF_INT_PHYLIB_EVENTS \ > + (MII_LAN83C185_ISF_INT6 | MII_LAN83C185_ISF_INT4 | \ > + MII_LAN83C185_ISF_INT7) > + > +#define MII_LAN83C185_EDPWRDOWN (1 << 13) /* EDPWRDOWN */ > +#define MII_LAN83C185_ENERGYON (1 << 1) /* ENERGYON */ > + > +#endif /* __LINUX_SMSCPHY_H__ */ > -- > 1.7.10.4 > > > _______________________________________________ > barebox mailing list > barebox@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/barebox > -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox