From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:6f8:1178:4:290:27ff:fe1d:cc33]) by merlin.infradead.org with esmtps (Exim 4.76 #1 (Red Hat Linux)) id 1TfSbb-0000we-M5 for barebox@lists.infradead.org; Mon, 03 Dec 2012 09:46:28 +0000 Date: Mon, 3 Dec 2012 10:46:25 +0100 From: Sascha Hauer Message-ID: <20121203094625.GJ10369@pengutronix.de> References: MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: barebox-bounces@lists.infradead.org Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: suddenly, i can't boot barebox on my beagle xM anymore To: "Robert P. J. Day" Cc: "U-Boot Version 2 (barebox)" Hi Robert, On Sat, Dec 01, 2012 at 04:18:08PM -0500, Robert P. J. Day wrote: > > a bit embarrassed but, all of a sudden, what used to work just fine > in terms of building and booting barebox on my beagleboard xM (rev C) > doesn't work anymore. > > not that long ago, i documented how easy this was here: > > http://www.crashcourse.ca/wiki/index.php/BeagleBoard-xM#Barebox_for_the_xM > > absolutely nothing out of the ordinary as i remember it. so, when > this worked, the boot looked like what you see here: > > http://www.crashcourse.ca/wiki/index.php/BeagleBoard-xM#Booting_to_Barebox_on_your_xM_--_it_actually_works > > now, the boot process produces: > > barebox 2012.11.0-00305-g159109f #1 Sat Dec 1 15:51:00 EST 2012 > > > Board: Texas Instrument's Beagle > NAND type unknown: ff,ff > No NAND device found (-19)! > gpmc_nand gpmc_nand0: probe failed: error 6 > omap-hsmmc omap-hsmmc0: registered as omap-hsmmc0 > mci mci0: registered disk0 > malloc space: 0x87bfff10 -> 0x87ffff0f (size 4 MB) > stack space: 0x4020f000 -> 0x4020fc00 (size 3 kB) > booting from MMC1 > > ... and hangs, suggesting that the MLO file is fine, but it's > barebox.bin that simply fails. I just rechecked, current master works fine for me on my beagle (no xM though). Just a guess, have you used the barebox-flash-image link instead of barebox.bin? Since the image is compressed now it becomes important to use the link (which points to the compressed image). Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox