Re: how does one enable barebox's low-level debugging?

[Sascha Hauer <s.hauer@pengutronix.de>]

On Mon, Dec 03, 2012 at 10:45:41AM -0500, Robert P. J. Day wrote:
> 
>   looking through common/startup.c and decided i wanted to see
> confirmation of all the initcalls running here:
> 
>         for (initcall = __barebox_initcalls_start;
>                         initcall < __barebox_initcalls_end; initcall++) {
>                 debug("initcall-> %pS\n", *initcall);
>                 result = (*initcall)();
>                 if (result)
>                         pr_err("initcall %pS failed: %s\n", *initcall,
>                                         strerror(-result));
>         }
> 
> 
> so i started from scratch, ran "make menuconfig" for both the x-loader
> and barebox to enable "low level debug messages", but i don't see any
> difference in the boot output.
> 
>   i've perused the barebox wiki and don't see anything regarding that
> setting.  am i doing something wrong?

You have to add a "#define DEBUG" to the file you want to have the debug
messages from. Add this *above* the includes, just like in the kernel.

Something not mentioned in the wiki is that before the first console is
initialized barebox will print the messages into a ring buffer which it
will dump when the first console is initialized.

Sascha


-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox