From: Sascha Hauer <s.hauer@pengutronix.de>
To: Wolfram Sang <w.sang@pengutronix.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH V2] mtd: nand: mxs: reset BCH earlier, too, to avoid NAND startup problems
Date: Thu, 6 Dec 2012 08:43:15 +0100 [thread overview]
Message-ID: <20121206074315.GT10369@pengutronix.de> (raw)
In-Reply-To: <1354734167-13486-1-git-send-email-w.sang@pengutronix.de>
On Wed, Dec 05, 2012 at 08:02:47PM +0100, Wolfram Sang wrote:
> It could happen (1 out of 100 times) that NAND did not start up
> correctly after warm rebooting, so barebox could not find its
> environment or DMA timed out due to a stalled BCH. When resetting BCH
> together with GPMI, the issue could not be observed anymore. We probably
> need the consistent state already before sending commands to NAND.
>
> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Applied, thanks
Sascha
> ---
> drivers/mtd/nand/nand_mxs.c | 13 ++++++++++---
> 1 file changed, 10 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/mtd/nand/nand_mxs.c b/drivers/mtd/nand/nand_mxs.c
> index 975a44f..c4509d3 100644
> --- a/drivers/mtd/nand/nand_mxs.c
> +++ b/drivers/mtd/nand/nand_mxs.c
> @@ -1128,6 +1128,7 @@ int mxs_nand_alloc_buffers(struct mxs_nand_info *nand_info)
> int mxs_nand_hw_init(struct mxs_nand_info *info)
> {
> void __iomem *gpmi_regs = (void *)MXS_GPMI_BASE;
> + void __iomem *bch_regs = (void __iomem *)MXS_BCH_BASE;
> int i = 0, ret;
> u32 val;
>
> @@ -1153,6 +1154,15 @@ int mxs_nand_hw_init(struct mxs_nand_info *info)
> if (ret)
> return ret;
>
> + val = readl(gpmi_regs + GPMI_VERSION);
> + info->version = val >> GPMI_VERSION_MINOR_OFFSET;
> +
> + /* Reset BCH. Don't use SFTRST on MX23 due to Errata #2847 */
> + ret = mxs_reset_block(bch_regs + BCH_CTRL,
> + info->version == GPMI_VERSION_TYPE_MX23);
> + if (ret)
> + return ret;
> +
> /*
> * Choose NAND mode, set IRQ polarity, disable write protection and
> * select BCH ECC.
> @@ -1163,9 +1173,6 @@ int mxs_nand_hw_init(struct mxs_nand_info *info)
> GPMI_CTRL1_BCH_MODE;
> writel(val, gpmi_regs + GPMI_CTRL1);
>
> - val = readl(gpmi_regs + GPMI_VERSION);
> - info->version = val >> GPMI_VERSION_MINOR_OFFSET;
> -
> return 0;
>
> err2:
> --
> 1.7.10.4
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
prev parent reply other threads:[~2012-12-06 7:43 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-12-05 14:53 [PATCH] mtd: nand: mxs: reset BCH earlier " Wolfram Sang
2012-12-05 18:37 ` Sascha Hauer
2012-12-05 18:42 ` Wolfram Sang
2012-12-05 18:50 ` Sascha Hauer
2012-12-05 19:02 ` [PATCH V2] mtd: nand: mxs: reset BCH earlier, too, " Wolfram Sang
2012-12-06 7:43 ` Sascha Hauer [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20121206074315.GT10369@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=w.sang@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox