From: Sascha Hauer <s.hauer@pengutronix.de>
To: Jan Luebbe <jlu@pengutronix.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH 19/19] drivers: net: add driver for TI CPSW
Date: Wed, 19 Dec 2012 22:11:56 +0100 [thread overview]
Message-ID: <20121219211156.GJ26326@pengutronix.de> (raw)
In-Reply-To: <1355840561-11552-20-git-send-email-jlu@pengutronix.de>
On Tue, Dec 18, 2012 at 03:22:41PM +0100, Jan Luebbe wrote:
> Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
> arch/arm/boards/beaglebone/board.c | 80 +++
> arch/arm/mach-omap/include/mach/cpsw.h | 49 ++
> drivers/net/Kconfig | 4 +
> drivers/net/Makefile | 1 +
> drivers/net/cpsw.c | 1021 ++++++++++++++++++++++++++++++++
> 5 files changed, 1155 insertions(+)
> create mode 100644 arch/arm/mach-omap/include/mach/cpsw.h
> create mode 100644 drivers/net/cpsw.c
>
> diff --git a/arch/arm/boards/beaglebone/board.c b/arch/arm/boards/beaglebone/board.c
> index d139e94..20b4bdd 100644
> --- a/arch/arm/boards/beaglebone/board.c
> +++ b/arch/arm/boards/beaglebone/board.c
> @@ -31,6 +31,7 @@
> #include <sizes.h>
> #include <io.h>
> #include <ns16550.h>
> +#include <net.h>
> #include <asm/armlinux.h>
> #include <generated/mach-types.h>
> #include <mach/am33xx-silicon.h>
> @@ -42,6 +43,7 @@
> #include <mach/ehci.h>
> #include <i2c/i2c.h>
> #include <linux/err.h>
> +#include <linux/phy.h>
> #include <usb/ehci.h>
> #include <mach/xload.h>
> #include <mach/am33xx-devices.h>
> @@ -306,6 +308,84 @@ static int beaglebone_console_init(void)
> console_initcall(beaglebone_console_init);
> #endif /* CONFIG_DRIVER_SERIAL_NS16550 */
>
> +#ifdef CONFIG_DRIVER_NET_CPSW
> +static void cpsw_control(int enabled)
> +{
> + return;
> +}
> +
> +static struct cpsw_slave_data cpsw_slaves[] = {
> + {
> + .slave_reg_ofs = 0x208,
> + .sliver_reg_ofs = 0xd80,
> + .phy_id = 0,
> + .phy_if = PHY_INTERFACE_MODE_MII,
> + },
> + {
> + .slave_reg_ofs = 0x308,
> + .sliver_reg_ofs = 0xdc0,
> + .phy_id = 1,
> + .phy_if = PHY_INTERFACE_MODE_MII,
> + },
> +};
> +
> +static struct cpsw_platform_data cpsw_data = {
> + .mdio_base = AM335X_CPSW_MDIO_BASE,
> + .cpsw_base = AM335X_CPSW_BASE,
> + .mdio_div = 0xff,
> + .channels = 8,
> + .cpdma_reg_ofs = 0x800,
> + .slaves = 2,
> + .slave_data = cpsw_slaves,
> + .ale_reg_ofs = 0xd00,
> + .ale_entries = 1024,
> + .host_port_reg_ofs = 0x108,
> + .hw_stats_reg_ofs = 0x900,
> + .mac_control = (1 << 5) /* MIIEN */,
> + .control = cpsw_control,
> + .host_port_num = 0,
> + .version = CPSW_CTRL_VERSION_2,
> +};
Most of this looks SoC specific, not board specific. You should use the
platform_device_id mechanism for this.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
prev parent reply other threads:[~2012-12-19 21:12 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-12-18 14:22 AM33xx and BeagleBone support Jan Luebbe
2012-12-18 14:22 ` [PATCH 01/19] ARM omap: remove unused function Jan Luebbe
2012-12-18 14:22 ` [PATCH 02/19] ARM omap4: remove unused struct Jan Luebbe
2012-12-18 14:22 ` [PATCH 03/19] ARM omap4: Add missing assembly protection in header file Jan Luebbe
2012-12-18 14:22 ` [PATCH 04/19] ARM omap4: Add missing double include protection Jan Luebbe
2012-12-18 14:22 ` [PATCH 05/19] ARM omap: Make gpmc base runtime configurable Jan Luebbe
2012-12-18 14:22 ` [PATCH 06/19] ARM omap: Make timer " Jan Luebbe
2012-12-18 14:22 ` [PATCH 07/19] ARM omap4: make PRM defines SoC specific Jan Luebbe
2012-12-18 14:22 ` [PATCH 08/19] ARM omap3: " Jan Luebbe
2012-12-18 14:22 ` [PATCH 09/19] ARM omap: Use SoC specific defines for gpmc and timer base Jan Luebbe
2012-12-18 14:22 ` [PATCH 10/19] ARM omap: include individual SoC files Jan Luebbe
2012-12-18 14:22 ` [PATCH 11/19] ARM omap: Add device register convenience functions Jan Luebbe
2012-12-18 14:22 ` [PATCH 12/19] ARM omap3: Use device register functions in boards Jan Luebbe
2012-12-18 14:22 ` [PATCH 13/19] ARM omap4: " Jan Luebbe
2012-12-18 14:22 ` [PATCH 14/19] ARM omap hsmmc: Fix register offset Jan Luebbe
2012-12-18 14:22 ` [PATCH 15/19] ARM omap3: Add change OMAP_ prefix to OMAP3_ for registers Jan Luebbe
2012-12-18 14:22 ` [PATCH 16/19] ARM OMAP AM33XX: create new ARCH for AM33xx Jan Luebbe
2012-12-18 14:22 ` [PATCH 17/19] arm: omap: am33xx: add support for low level debug Jan Luebbe
2012-12-18 14:22 ` [PATCH 18/19] arm: beaglebone: add first-stage support for AM335x and board Jan Luebbe
2012-12-19 12:07 ` Teresa Gámez
2012-12-18 14:22 ` [PATCH 19/19] drivers: net: add driver for TI CPSW Jan Luebbe
2012-12-19 21:11 ` Sascha Hauer [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20121219211156.GJ26326@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=jlu@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox