mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH] at91: add dump mux command
Date: Wed, 2 Jan 2013 11:06:41 +0100	[thread overview]
Message-ID: <20130102100641.GA26326@pengutronix.de> (raw)
In-Reply-To: <1356553728-32218-1-git-send-email-plagnioj@jcrosoft.com>

On Wed, Dec 26, 2012 at 09:28:48PM +0100, Jean-Christophe PLAGNIOL-VILLARD wrote:
> This will allow to dump all pin configuration in a nice table
> and if the bank/pin is specified the pin details

Applied, thanks

Sascha

> 
> barebox@Atmel at91sam9x5-ek:/
> Pin     PIOA            PIOB            PIOC            PIOD
> 
> 0:      [gpio] set      [periph A]      [gpio] set      [periph A]
> 1:      [periph A]      [periph A]      [gpio] set      [periph A]
> 2:      [gpio] set      [periph A]      [gpio] set      [periph A]
> 3:      [gpio] set      [periph A]      [gpio] set      [periph A]
> 4:      [gpio] set      [periph A]      [gpio] set      [gpio] clear
> 5:      [gpio] set      [periph A]      [gpio] set      [gpio] set
> 6:      [gpio] set      [periph A]      [gpio] set      [periph A]
> 7:      [gpio] set      [periph A]      [gpio] set      [periph A]
> 8:      [gpio] set      [gpio] set      [gpio] set      [periph A]
> 9:      [periph A]      [periph A]      [gpio] set      [periph A]
> 10:     [periph A]      [periph A]      [gpio] set      [periph A]
> 11:     [periph A]      [gpio] set      [gpio] set      [periph A]
> 12:     [periph A]      [gpio] set      [gpio] set      [periph A]
> 13:     [periph A]      [gpio] clear    [gpio] set      [periph A]
> 14:     [gpio] set      [gpio] clear    [gpio] set      [gpio] set
> 15:     [periph A]      [gpio] set      [gpio] set      [gpio] set
> 16:     [periph A]      [gpio] set      [gpio] clear    [periph A]
> 17:     [periph A]      [gpio] set      [gpio] set      [periph A]
> 18:     [periph A]      [gpio] set      [gpio] set      [periph A]
> 19:     [periph A]      [periph A]      [gpio] set      [gpio] set
> 20:     [periph A]      [periph A]      [gpio] clear    [gpio] set
> 21:     [gpio] set      [periph A]      [gpio] clear    [gpio] clear
> 22:     [gpio] set      [periph A]      [gpio] set      [periph A]
> 23:     [gpio] set      [periph A]      [gpio] set      [periph A]
> 24:     [gpio] set      [periph A]      [gpio] set      [periph A]
> 25:     [gpio] set      [periph A]      [gpio] set      [periph A]
> 26:     [gpio] set      [periph A]      [gpio] set      [periph A]
> 27:     [gpio] clear    [periph A]      [gpio] set      [periph A]
> 28:     [gpio] set      [periph A]      [gpio] clear    [periph A]
> 29:     [gpio] set      [periph A]      [gpio] set      [periph A]
> 30:     [gpio] set      [periph A]      [gpio] set      [periph A]
> 31:     [gpio] set      [periph A]      [gpio] set      [periph A]
> barebox@Atmel at91sam9x5-ek:/
> pioA27 configuration
> 
> [gpio] clear
> multidrive = disable
> pullup = disable
> degitch = disable
> debounce = disable
> pulldown = enable
> schmitt trigger = enable
> 
> Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
> ---
>  arch/arm/mach-at91/Kconfig |    4 +
>  arch/arm/mach-at91/gpio.c  |  226 ++++++++++++++++++++++++++++++++++++++++++++
>  2 files changed, 230 insertions(+)
> 
> diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
> index 448044a..58780c7 100644
> --- a/arch/arm/mach-at91/Kconfig
> +++ b/arch/arm/mach-at91/Kconfig
> @@ -510,4 +510,8 @@ config CALAO_MB_QIL_A9260
>  	bool "MB-QIL A9260 Motherboard Board support"
>  	depends on MACH_QIL_A9260
>  
> +config CMD_AT91MUX
> +	bool "at91mux dump command"
> +	default y
> +
>  endif
> diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c
> index 9e71324..9df5218 100644
> --- a/arch/arm/mach-at91/gpio.c
> +++ b/arch/arm/mach-at91/gpio.c
> @@ -18,6 +18,8 @@
>   */
>  
>  #include <common.h>
> +#include <command.h>
> +#include <complete.h>
>  #include <linux/clk.h>
>  #include <linux/err.h>
>  #include <errno.h>
> @@ -28,6 +30,7 @@
>  #include <gpio.h>
>  #include <init.h>
>  #include <driver.h>
> +#include <getopt.h>
>  
>  #define MAX_GPIO_BANKS		5
>  #define MAX_NB_GPIO_PER_BANK	32
> @@ -77,6 +80,7 @@ static inline unsigned pin_to_mask(unsigned pin)
>   * periph A and B has changed
>   * So provide the right call back
>   * if not present means the IP does not support it
> + * @get_periph: return the periph mode configured
>   * @mux_A_periph: mux as periph A
>   * @mux_B_periph: mux as periph B
>   * @mux_C_periph: mux as periph C
> @@ -87,13 +91,18 @@ static inline unsigned pin_to_mask(unsigned pin)
>   * @disable_schmitt_trig: disable schmitt trigger
>   */
>  struct at91_pinctrl_mux_ops {
> +	enum at91_mux (*get_periph)(void __iomem *pio, unsigned mask);
>  	void (*mux_A_periph)(void __iomem *pio, unsigned mask);
>  	void (*mux_B_periph)(void __iomem *pio, unsigned mask);
>  	void (*mux_C_periph)(void __iomem *pio, unsigned mask);
>  	void (*mux_D_periph)(void __iomem *pio, unsigned mask);
> +	bool (*get_deglitch)(void __iomem *pio, unsigned pin);
>  	void (*set_deglitch)(void __iomem *pio, unsigned mask, bool in_on);
> +	bool (*get_debounce)(void __iomem *pio, unsigned pin, u32 *div);
>  	void (*set_debounce)(void __iomem *pio, unsigned mask, bool in_on, u32 div);
> +	bool (*get_pulldown)(void __iomem *pio, unsigned pin);
>  	void (*set_pulldown)(void __iomem *pio, unsigned mask, bool in_on);
> +	bool (*get_schmitt_trig)(void __iomem *pio, unsigned pin);
>  	void (*disable_schmitt_trig)(void __iomem *pio, unsigned mask);
>  };
>  
> @@ -185,20 +194,93 @@ static void at91_mux_pio3_disable_schmitt_trig(void __iomem *pio, unsigned mask)
>  	__raw_writel(__raw_readl(pio + PIO_SCHMITT) | mask, pio + PIO_SCHMITT);
>  }
>  
> +#ifdef CONFIG_CMD_AT91MUX
> +static unsigned at91_mux_get_pullup(void __iomem *pio, unsigned pin)
> +{
> +	return (__raw_readl(pio + PIO_PUSR) >> pin) & 0x1;
> +}
> +
> +static unsigned at91_mux_get_multidrive(void __iomem *pio, unsigned pin)
> +{
> +	return (__raw_readl(pio + PIO_MDSR) >> pin) & 0x1;
> +}
> +
> +static enum at91_mux at91_mux_pio3_get_periph(void __iomem *pio, unsigned mask)
> +{
> +	unsigned select;
> +
> +	if (__raw_readl(pio + PIO_PSR) & mask)
> +		return AT91_MUX_GPIO;
> +
> +	select = !!(__raw_readl(pio + PIO_ABCDSR1) & mask);
> +	select |= (!!(__raw_readl(pio + PIO_ABCDSR2) & mask) << 1);
> +
> +	return select + 1;
> +}
> +
> +static enum at91_mux at91_mux_get_periph(void __iomem *pio, unsigned mask)
> +{
> +	unsigned select;
> +
> +	if (__raw_readl(pio + PIO_PSR) & mask)
> +		return AT91_MUX_GPIO;
> +
> +	select = __raw_readl(pio + PIO_ABSR) & mask;
> +
> +	return select + 1;
> +}
> +
> +static bool at91_mux_get_deglitch(void __iomem *pio, unsigned pin)
> +{
> +	return (__raw_readl(pio + PIO_IFSR) >> pin) & 0x1;
> +}
> +
> +static bool at91_mux_pio3_get_debounce(void __iomem *pio, unsigned pin, u32 *div)
> +{
> +	*div = __raw_readl(pio + PIO_SCDR);
> +
> +	return (__raw_readl(pio + PIO_IFSCSR) >> pin) & 0x1;
> +}
> +
> +static bool at91_mux_pio3_get_pulldown(void __iomem *pio, unsigned pin)
> +{
> +	return (__raw_readl(pio + PIO_PPDSR) >> pin) & 0x1;
> +}
> +
> +static bool at91_mux_pio3_get_schmitt_trig(void __iomem *pio, unsigned pin)
> +{
> +	return (__raw_readl(pio + PIO_SCHMITT) >> pin) & 0x1;
> +}
> +#else
> +#define at91_mux_get_periph		NULL
> +#define at91_mux_pio3_get_periph	NULL
> +#define at91_mux_get_deglitch		NULL
> +#define at91_mux_pio3_get_debounce	NULL
> +#define at91_mux_pio3_get_pulldown	NULL
> +#define at91_mux_pio3_get_schmitt_trig	NULL
> +#endif
> +
>  static struct at91_pinctrl_mux_ops at91rm9200_ops = {
> +	.get_periph	= at91_mux_get_periph,
>  	.mux_A_periph	= at91_mux_set_A_periph,
>  	.mux_B_periph	= at91_mux_set_B_periph,
> +	.get_deglitch	= at91_mux_get_deglitch,
>  	.set_deglitch	= at91_mux_set_deglitch,
>  };
>  
>  static struct at91_pinctrl_mux_ops at91sam9x5_ops = {
> +	.get_periph	= at91_mux_pio3_get_periph,
>  	.mux_A_periph	= at91_mux_pio3_set_A_periph,
>  	.mux_B_periph	= at91_mux_pio3_set_B_periph,
>  	.mux_C_periph	= at91_mux_pio3_set_C_periph,
>  	.mux_D_periph	= at91_mux_pio3_set_D_periph,
> +	.get_deglitch	= at91_mux_get_deglitch,
>  	.set_deglitch	= at91_mux_pio3_set_deglitch,
> +	.get_debounce	= at91_mux_pio3_get_debounce,
>  	.set_debounce	= at91_mux_pio3_set_debounce,
> +	.get_pulldown	= at91_mux_pio3_get_pulldown,
>  	.set_pulldown	= at91_mux_pio3_set_pulldown,
> +	.get_schmitt_trig = at91_mux_pio3_get_schmitt_trig,
>  	.disable_schmitt_trig = at91_mux_pio3_disable_schmitt_trig,
>  };
>  
> @@ -410,6 +492,150 @@ int at91_disable_schmitt_trig(unsigned pin)
>  }
>  EXPORT_SYMBOL(at91_disable_schmitt_trig);
>  
> +#ifdef CONFIG_CMD_AT91MUX
> +static void at91mux_printf_mode(unsigned bank, unsigned pin)
> +{
> +	struct at91_gpio_chip *at91_gpio = &gpio_chip[bank];
> +	void __iomem *pio = at91_gpio->regbase;
> +	enum at91_mux mode;
> +	u32 pdsr;
> +
> +	unsigned mask = pin_to_mask(pin);
> +	
> +	mode = at91_gpio->ops->get_periph(pio, mask);
> +	
> +	if (mode == AT91_MUX_GPIO) {
> +		pdsr = __raw_readl(pio + PIO_PDSR);
> +
> +		printf("[gpio] %s", pdsr & mask ? "set" : "clear");
> +	} else {
> +		printf("[periph %c]", mode + 'A' - 1);
> +	}
> +}
> +
> +static void at91mux_dump_config(void)
> +{
> +	int bank, j;
> +
> +	/* print heading */
> +	printf("Pin\t");
> +	for (bank = 0; bank < gpio_banks; bank++) {
> +		printf("PIO%c\t\t", 'A' + bank);
> +	};
> +	printf("\n\n");
> +
> +	/* print pin status */
> +	for (j = 0; j < 32; j++) {
> +		printf("%i:\t", j);
> +
> +		for (bank = 0; bank < gpio_banks; bank++) {
> +			at91mux_printf_mode(bank, j);
> +
> +			printf("\t");
> +		}
> +
> +		printf("\n");
> +	}
> +}
> +
> +static void at91mux_print_en_disable(const char *str, bool is_on)
> +{
> +	printf("%s = ", str);
> +	
> +	if (is_on)
> +		printf("enable\n");
> +	else
> +		printf("disable\n");
> +}
> +
> +static void at91mux_dump_pio_config(unsigned bank, unsigned pin)
> +{
> +	struct at91_gpio_chip *at91_gpio = &gpio_chip[bank];
> +	void __iomem *pio = at91_gpio->regbase;
> +	u32 div;
> +
> +	printf("pio%c%d configuration\n\n", bank + 'A', pin);
> +
> +	at91mux_printf_mode(bank, pin);
> +	printf("\n");
> +
> +	at91mux_print_en_disable("multidrive",
> +		at91_mux_get_multidrive(pio, pin));
> +
> +	at91mux_print_en_disable("pullup",
> +		at91_mux_get_pullup(pio, pin));
> +
> +	if (at91_gpio->ops->get_deglitch)
> +		at91mux_print_en_disable("degitch",
> +			at91_gpio->ops->get_deglitch(pio, pin));
> +
> +	if (at91_gpio->ops->get_debounce) {
> +		printf("debounce = ");
> +		if (at91_gpio->ops->get_debounce(pio, pin, &div))
> +			printf("enable at %d\n", div);
> +		else
> +			printf("disable\n");
> +	}
> +
> +	if (at91_gpio->ops->get_pulldown)
> +		at91mux_print_en_disable("pulldown",
> +			at91_gpio->ops->get_pulldown(pio, pin));
> +
> +	if (at91_gpio->ops->get_schmitt_trig)
> +		at91mux_print_en_disable("schmitt trigger",
> +			!at91_gpio->ops->get_schmitt_trig(pio, pin));
> +}
> +
> +static int do_at91mux(int argc, char *argv[])
> +{
> +	int opt;
> +	unsigned bank = 0;
> +	unsigned pin = 0;
> +
> +	if (argc < 2) {
> +		at91mux_dump_config();
> +		return 0;
> +	}
> +
> +	while ((opt = getopt(argc, argv, "b:p:")) > 0) {
> +		switch (opt) {
> +		case 'b':
> +			bank = simple_strtoul(optarg, NULL, 10);
> +			break;
> +		case 'p':
> +			pin = simple_strtoul(optarg, NULL, 10);
> +			break;
> +		}
> +	}
> +
> +	if (bank >= gpio_banks) {
> +		printf("bank %c >= supported %c banks\n", bank + 'A',
> +			gpio_banks + 'A');
> +		return 1;
> +	}
> +
> +	if (pin >= 32) {
> +		printf("pin %d >= supported %d pins\n", pin, 32);
> +		return 1;
> +	}
> +
> +	at91mux_dump_pio_config(bank, pin);
> +
> +	return 0;
> +}
> +
> +BAREBOX_CMD_HELP_START(at91mux)
> +BAREBOX_CMD_HELP_USAGE("at91mux [-p <pin> -b <bank>]\n")
> +BAREBOX_CMD_HELP_SHORT("dump current mux configuration if bank/pin specified dump pin details\n");
> +BAREBOX_CMD_HELP_END
> +
> +BAREBOX_CMD_START(at91mux)
> +	.cmd		= do_at91mux,
> +	.usage		= "dump current mux configuration",
> +	BAREBOX_CMD_HELP(cmd_at91mux_help)
> +	BAREBOX_CMD_COMPLETE(empty_complete)
> +BAREBOX_CMD_END
> +#endif
>  /*--------------------------------------------------------------------------*/
>  
>  static int at91_gpio_get(struct gpio_chip *chip, unsigned offset)
> -- 
> 1.7.10.4
> 
> 
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

      reply	other threads:[~2013-01-02 10:06 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-12-26 20:28 Jean-Christophe PLAGNIOL-VILLARD
2013-01-02 10:06 ` Sascha Hauer [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20130102100641.GA26326@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=plagnioj@jcrosoft.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox