mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To: Mylene Josserand <Mylene.Josserand@navocap.com>
Cc: barebox mailist <barebox@lists.infradead.org>
Subject: Re: [help] PHY driver : Unable to find a PHY (unknown ID?)
Date: Fri, 4 Jan 2013 12:23:03 +0100	[thread overview]
Message-ID: <20130104122303.67e97e48@skate> (raw)
In-Reply-To: <CA78C307B8F06747967D122FC656B153774344@SERVEUR0.nvp.local>

Dear Mylene Josserand,

On Fri, 4 Jan 2013 12:03:17 +0100, Mylene Josserand wrote:

> > Good to see some developers from Toulouse using Barebox! I'm close, in
> > Colomiers.
> 
> Yes ! We are neighbour :)

Indeed :)

> Free Electrons, I know you by name. And the kernel sources on your web 
> site help me a lot !

Good to know this is useful.

> > Which board are you targeting?
> 
> It is a "home-made" board with a iMX27.

Ok.

> Hum, I did not configured it myself. I used a previous configuration of 
> the board which was :
> "
> static struct fec_platform_data fec_info = {
> 	.xcv_type = MII100,
> 	.phy_addr = 1,
> };"
> 
> How can I know which address I need to put ?

Look at chapter "4.11 PHY Address strapping and LED Output Polarity
Selection" of the LAN8700 manual. It says the PHY address is selected
according to the value on pins PHYAD[0:4] during PHY reset. So you
should check your board schematics and see how these pins are wired to
find out what is the PHY address.

Best regards,

Thomas
-- 
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2013-01-04 11:23 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-01-04  9:09 Mylene Josserand
2013-01-04 10:18 ` Thomas Petazzoni
2013-01-04 11:03   ` Mylene Josserand
2013-01-04 11:23     ` Thomas Petazzoni [this message]
2013-01-04 12:46       ` Mylene Josserand
2013-01-04 13:28         ` Eric Bénard
2013-01-07 13:56           ` Mylene Josserand

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20130104122303.67e97e48@skate \
    --to=thomas.petazzoni@free-electrons.com \
    --cc=Mylene.Josserand@navocap.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox