mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: Sascha Hauer <s.hauer@pengutronix.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH 7/7] at91: usb_a9263: add bootstrap version
Date: Sat, 19 Jan 2013 12:24:47 +0100	[thread overview]
Message-ID: <20130119112447.GI22953@game.jcrosoft.org> (raw)
In-Reply-To: <20130119112251.GF1906@pengutronix.de>

On 12:22 Sat 19 Jan     , Sascha Hauer wrote:
> On Sat, Jan 19, 2013 at 08:35:14AM +0100, Jean-Christophe PLAGNIOL-VILLARD wrote:
> > Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
> > ---
> >  arch/arm/boards/usb-a926x/Makefile                 |    3 +++
> >  arch/arm/boards/usb-a926x/usb_a9263_bootstrap.c    |   16 +++++++++++++
> >  .../configs/usb_a9263_128mib_bootstrap_defconfig   |   24 ++++++++++++++++++++
> >  arch/arm/configs/usb_a9263_bootstrap_defconfig     |   23 +++++++++++++++++++
> >  4 files changed, 66 insertions(+)
> >  create mode 100644 arch/arm/boards/usb-a926x/usb_a9263_bootstrap.c
> >  create mode 100644 arch/arm/configs/usb_a9263_128mib_bootstrap_defconfig
> >  create mode 100644 arch/arm/configs/usb_a9263_bootstrap_defconfig
> > 
> > diff --git a/arch/arm/boards/usb-a926x/Makefile b/arch/arm/boards/usb-a926x/Makefile
> > index 9511a76..4c8cd64 100644
> > --- a/arch/arm/boards/usb-a926x/Makefile
> > +++ b/arch/arm/boards/usb-a926x/Makefile
> > @@ -1,5 +1,8 @@
> >  obj-y += init.o
> >  
> > +bootstrap-$(CONFIG_MACH_USB_A9263) = usb_a9263_bootstrap.o
> > +obj-$(CONFIG_BOOTSTRAP) += $(bootstrap-y)
> > +
> >  lowlevel_init-$(CONFIG_MACH_USB_A9263) = usb_a9263_lowlevel_init.o
> >  
> >  obj-$(CONFIG_MACH_DO_LOWLEVEL_INIT) += $(lowlevel_init-y)
> > diff --git a/arch/arm/boards/usb-a926x/usb_a9263_bootstrap.c b/arch/arm/boards/usb-a926x/usb_a9263_bootstrap.c
> > new file mode 100644
> > index 0000000..368c677
> > --- /dev/null
> > +++ b/arch/arm/boards/usb-a926x/usb_a9263_bootstrap.c
> > @@ -0,0 +1,16 @@
> > +/*
> > + * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnio@jcrosoft.com>
> > + *
> > + * Under GPLv2
> > + */
> > +
> > +#include <common.h>
> > +#include <bootstrap.h>
> > +#include <mach/bootstrap.h>
> > +
> > +#ifdef CONFIG_MTD_DATAFLASH
> > +void * bootstrap_board_read_dataflash(void)
> > +{
> > +	return bootstrap_read_devfs("dataflash0", false, 0xffc0, 204864, 204864);
> > +}
> > +#endif
> > diff --git a/arch/arm/configs/usb_a9263_128mib_bootstrap_defconfig b/arch/arm/configs/usb_a9263_128mib_bootstrap_defconfig
> > new file mode 100644
> > index 0000000..c4114a8
> > --- /dev/null
> > +++ b/arch/arm/configs/usb_a9263_128mib_bootstrap_defconfig
> > @@ -0,0 +1,24 @@
> > +CONFIG_ARCH_AT91SAM9263=y
> > +CONFIG_MACH_USB_A9263=y
> > +CONFIG_AT91_HAVE_SRAM_128M=y
> > +CONFIG_BAREBOX_MAX_IMAGE_SIZE=0x12000
> > +CONFIG_AEABI=y
> > +# CONFIG_CMD_ARM_CPUINFO is not set
> > +CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
> > +CONFIG_ENVIRONMENT_VARIABLES=y
> > +CONFIG_PBL_IMAGE=y
> > +CONFIG_MMU=y
> > +CONFIG_MALLOC_DUMMY=y
> > +CONFIG_PROMPT="USB-9263:"
> > +CONFIG_SHELL_NONE=y
> > +# CONFIG_DEFAULT_ENVIRONMENT is not set
> > +# CONFIG_SPI is not set
> > +CONFIG_MTD=y
> > +# CONFIG_MTD_WRITE is not set
> > +# CONFIG_MTD_OOB_DEVICE is not set
> > +CONFIG_NAND=y
> > +# CONFIG_NAND_ECC_HW is not set
> > +# CONFIG_NAND_ECC_HW_SYNDROME is not set
> > +# CONFIG_NAND_ECC_HW_NONE is not set
> > +CONFIG_NAND_ATMEL=y
> > +# CONFIG_FS_RAMFS is not set
> > diff --git a/arch/arm/configs/usb_a9263_bootstrap_defconfig b/arch/arm/configs/usb_a9263_bootstrap_defconfig
> > new file mode 100644
> > index 0000000..6751dad
> > --- /dev/null
> > +++ b/arch/arm/configs/usb_a9263_bootstrap_defconfig
> > @@ -0,0 +1,23 @@
> > +CONFIG_ARCH_AT91SAM9263=y
> > +CONFIG_MACH_USB_A9263=y
> > +CONFIG_BAREBOX_MAX_IMAGE_SIZE=0x12000
> > +CONFIG_AEABI=y
> > +# CONFIG_CMD_ARM_CPUINFO is not set
> > +CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
> > +CONFIG_ENVIRONMENT_VARIABLES=y
> > +CONFIG_PBL_IMAGE=y
> > +CONFIG_MMU=y
> > +CONFIG_MALLOC_DUMMY=y
> > +CONFIG_PROMPT="USB-9263:"
> > +CONFIG_SHELL_NONE=y
> > +# CONFIG_DEFAULT_ENVIRONMENT is not set
> > +# CONFIG_SPI is not set
> > +CONFIG_MTD=y
> > +# CONFIG_MTD_WRITE is not set
> > +# CONFIG_MTD_OOB_DEVICE is not set
> > +CONFIG_NAND=y
> > +# CONFIG_NAND_ECC_HW is not set
> > +# CONFIG_NAND_ECC_HW_SYNDROME is not set
> > +# CONFIG_NAND_ECC_HW_NONE is not set
> > +CONFIG_NAND_ATMEL=y
> > +# CONFIG_FS_RAMFS is not set
> 
> Compilation of these configs ends with:
> 
> arch/arm/mach-at91/built-in.o: In function `boot_seq':
> at91sam9263_devices.c:(.text.boot_seq+0x28): undefined reference to `bootstrap_boot'
I found it too

I send the wrong patch series

this is because in the defcofnig this verison does not have the lib bootstrap
enabled

Best Regards,
J.
> 
> Sascha
> 
> -- 
> Pengutronix e.K.                           |                             |
> Industrial Linux Solutions                 | http://www.pengutronix.de/  |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2013-01-19 11:26 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-01-19  7:33 [PATCH 0/7 v2] at91: add bootstrap support Jean-Christophe PLAGNIOL-VILLARD
2013-01-19  7:35 ` [PATCH 1/7] at91: add test commamd to emulate bootrom boot Jean-Christophe PLAGNIOL-VILLARD
2013-01-19  7:35   ` [PATCH 2/7] at91sam926x: lowlevel add external boot support Jean-Christophe PLAGNIOL-VILLARD
2013-01-19  7:35   ` [PATCH 3/7] at91: sam926x: switch lowlevel param to c code Jean-Christophe PLAGNIOL-VILLARD
2013-01-19  7:35   ` [PATCH 4/7] at91: usb-a9263 add lowlevel init Jean-Christophe PLAGNIOL-VILLARD
2013-01-19  7:35   ` [PATCH 5/7] introduce common bootstrap code Jean-Christophe PLAGNIOL-VILLARD
2013-01-19 11:24     ` Sascha Hauer
2013-01-19 11:26       ` Jean-Christophe PLAGNIOL-VILLARD
2013-01-19 11:29     ` Sascha Hauer
2013-01-19 13:36       ` Jean-Christophe PLAGNIOL-VILLARD
2013-01-19  7:35   ` [PATCH 6/7] at91: add bootstrap version Jean-Christophe PLAGNIOL-VILLARD
2013-01-19  7:35   ` [PATCH 7/7] at91: usb_a9263: " Jean-Christophe PLAGNIOL-VILLARD
2013-01-19 11:22     ` Sascha Hauer
2013-01-19 11:24       ` Jean-Christophe PLAGNIOL-VILLARD [this message]
  -- strict thread matches above, loose matches on Subject: below --
2013-01-19 11:21 [PATCH 0/7 v3] at91: add bootstrap support Jean-Christophe PLAGNIOL-VILLARD
2013-01-19 11:26 ` [PATCH 1/7] at91: add test commamd to emulate bootrom boot Jean-Christophe PLAGNIOL-VILLARD
2013-01-19 11:26   ` [PATCH 7/7] at91: usb_a9263: add bootstrap version Jean-Christophe PLAGNIOL-VILLARD
2013-01-19 11:33     ` Sascha Hauer
2013-01-19 13:33       ` Jean-Christophe PLAGNIOL-VILLARD
2013-01-19 13:52         ` Sascha Hauer
2013-01-19 15:03           ` Jean-Christophe PLAGNIOL-VILLARD
2012-12-29 10:04 [PATCH 0/7] at91: add bootstrap support Jean-Christophe PLAGNIOL-VILLARD
2012-12-29 10:08 ` [PATCH 1/7] at91: add test commamd to emulate bootrom boot Jean-Christophe PLAGNIOL-VILLARD
2012-12-29 10:08   ` [PATCH 7/7] at91: usb_a9263: add bootstrap version Jean-Christophe PLAGNIOL-VILLARD

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20130119112447.GI22953@game.jcrosoft.org \
    --to=plagnioj@jcrosoft.com \
    --cc=barebox@lists.infradead.org \
    --cc=s.hauer@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox