* v2013.02.0
@ 2013-02-04 14:51 Sascha Hauer
0 siblings, 0 replies; only message in thread
From: Sascha Hauer @ 2013-02-04 14:51 UTC (permalink / raw)
To: barebox
Hi All,
We have a february release. As usual, here's what happened since
the last release.
Sascha
----------------------------------------------------------------
Alexander Aring (5):
meminfo: fix missing include
memory: fix size address calculation
meminfo: fix display of allocated addresses
arm-mmu: remove semicolon in arm mmu.c
mtd-core: fix compiler warning
Alexander Shiyan (3):
x86: Add formal Kconfig parameter "X86_BOOTLOADER"
ARM: OMAP: Remove unneeded dependencies for GPMC
of: Fix of_find_node_by_path breakage
Antony Pavlov (4):
MIPS: add pre-bootloader (pbl) image support
MIPS: qemu-malta: add trivial pbl support
MIPS: qemu-malta_defconfig: use pbl
spi: fix compiler warning
Jan Luebbe (3):
arm: omap: am33xx: add support for low level debug
arm: beaglebone: add first-stage support for AM335x and board
nand_write: initialize OOB buffer for each page
Jean-Christophe PLAGNIOL-VILLARD (57):
gpiolib: add gpio_request and gpio_free support
gpiolib: add command to dump the current gpio status
at91: use gpio_is_valid to check gpio
at91: use -EINVAL for invalid gpio
at91: drop PIN_BASE offset for gpio
at91: gpio: switch to device driver
at91: gpio: switch to ops
at91: switch to gpiolib
mtd: atmel_nand: request and configure pio via gpiolib
usb: at91_udc: request and configure vbus pin via gpiolib
spi: atmel: request cs pin via gpiolib
at91: factorise dbgu address
at91sam9x5ek: switch heartbeat to d2 (pioD21)
led-gpio: use gpio_request and gpio_free
at91: enable clock via clock framework
at91: factoryse PMC address as it's the same on every soc
at91: pmc: drop AT91_BASE_SYS
at91: introduce Kconfig to select the dbgu for lowlevel debug
at91: sync with the kernel address base
at91: at91sam9: provide its own clkdev for pit
at91: PIT: switch to platform_driver
at91: autodetect the soc one time at postcore_initcall
at91: SMC: switch to platform_driver
at91: wdt: drop AT91_SYS_BASE
at91: introduce AT91SAM9_SMC and AT91SAM9_TIMER
at91: drop AT91_BASE_PIOx for soc specific one for none boot code
at91: add dump mux command
w1: gpio: use int for gpio
at91: sam9x5ek: use -EINVAL for invalid gpio on 1-wire
at91sam9g45: fix i2c typos
atmel_spi: fix spi cs gpio request loop
qt1070: init default key code first
graphic_utils/fb_open: fix fbsize
Makefile: move cmd_check_file_size to Makefile.lib
ohci: make it depends on !MMU
ohci: only enable drivers if ohci is enabled
atmel_mci: rename atmel_mci_host tp atmel_mci
atmel_mci: rename atmel_mci_readl/writel to atmci_readl/writel
atmel_mci: rename all function to start with atmci
atmel_mci: use linux regs define
atmel_mci: detect IP version
atmel_mci: version 0x5xx of the IP have a different clk div
atmel_mci: fix host init
atmel_mci: rwproof is only needed up to IP version 0x200
atmel_mci: on version 0x0 we need to reset the IP at each request
atmel_mci: after a software timeout the IP need to be reset
atmel_mci: support the SD highspeed since IP version 0x300
atmel_mci: update the SD/SDIO Card Register at request time
atmel_mci: drop board host caps
atmel_mci: gpio: request and configure card detect
gpio_keys: fix loop on buttons for request and configuration
at91sam9261: fix max bare_init it's 156KiB
at91sam9n12: fix wp_pin invalid value
at91sam9x5ek: fix wp_pin and detect_pin pin invalid value
at91rm9200: fix default TEXT_BASE to 15MiB
at91rm9200ek: fix mem size
omap3: fix debug_ll uart base
Maxime Ripard (3):
ARM: cfa10036: Add the AT24HC02 I2C EEPROM
ARM: cfa10036: Retrieve the board variant from the AT24
ARM: cfa10036: Use the board variant to load a different device tree
Sascha Hauer (67):
ARM i.MX31 pcm037: rewrite lowlevel init code in C
ARM i.MX31 pcm037: Switch to new environment
ARM i.MX31: sync iomux with kernel
ARM i.MX31 pcm037: add more iomux pins
ARM i.MX31: Add mmc register convenience functions
ARM i.MX31 pcm037: add mmc support
USB ehci: Allow to register independently from device
USB i.MX: Add chipidea driver support
ARM i.MX27: Add USB device functions
ARM i.MX51: Add USB device functions
ARM i.MX31: Add USB device functions
ARM i.MX pcm038: switch to chipidea support
pcm038: Stop ongoing ULPI transfers before registering the transceiver
ARM i.MX pcm038: Update defconfig for chipidea driver
USB ULPI: Add missing ulpi_write function
USB ULPI: Add more register/bit defines
ata sff: set device pointer in ata port
mci: Allow to specify device name
mci i.MX esdhc: Allow to specify devicename from platformdata
mfd mc13893: Add register defines
ARM i.MX51: Add support for the Efika MX Smartbook
ARM: Add defconfig for Efika MX smartbook
Merge branch 'pu/usb' into for-next/imx
USB ehci: Add powerup fixup for EfikaSB
Merge branch 'pu/efikasb' into for-next/imx
Arm Efika MX Smartbook: coding style fixes
Merge branch 'pu/efikasb' into for-next/imx
ARM omap: remove unused function
ARM omap4: remove unused struct
ARM omap4: Add missing assembly protection in header file
ARM omap4: Add missing double include protection
ARM omap: Make gpmc base runtime configurable
ARM omap: Make timer base runtime configurable
ARM omap4: make PRM defines SoC specific
ARM omap3: make PRM defines SoC specific
ARM omap: Use SoC specific defines for gpmc and timer base
ARM omap: include individual SoC files
ARM omap: Add device register convenience functions
ARM omap3: Use device register functions in boards
ARM omap4: Use device register functions in boards
ARM omap hsmmc: Fix register offset
ARM omap3: Add change OMAP_ prefix to OMAP3_ for registers
mci omap_hsmmc: Fix whitespaces
ARM omap / mci: Fix register offsets
Merge branch 'for-next/at91'
Merge branch 'for-next/gpio-request'
Merge branch 'for-next/imx'
Merge branch 'for-next/mips'
Merge branch 'for-next/misc'
Merge branch 'for-next/mxs'
Merge branch 'for-next/omap'
Merge branch 'for-next/ubi'
fixup! commands: add ubiformat
ARM am33xx: the hsmmc is a omap4 type mmc controller
led: test for led->set callback before calling it
ARM panda: do not set gpio direction of heartbeat LED
Merge branch 'delivery/at91_fixes' of git://git.jcrosoft.org/barebox
ARM i.MX25: Add missing device registration for the iomux
ARM Ka-Ro TX25: fix running in SDRAM test
ARM Ka-Ro TX25: fix compilation with external NAND boot enabled
ARM v7: Fix register corruption in v7_mmu_cache_off
ARM bcm2835: Fix noreturn function does return
ARM: Fix reassigning symbols in defconfigs
pbl string: Fix no previous prototype warnings
Merge branch 'pu/build-warnings'
ARM AT91 pm9263: Fix phy address
Release v2013.02.0
Teresa Gámez (10):
ARM OMAP AM33XX: create new ARCH for AM33xx
ARM OMAP4: Add SRAM base define
ARM OMAP4: Add EHCI base define
ARM AM33XX: Add MMC Bases
ARM AM33XX: Add mmc0 pin mux function
ARM OMAP: Add SRAM and DRAM to device register functions
ARM OMAP: Apply RAM device register functions to boards
ARM OMAP: Add EHCI to device register functions
ARM OMAP: Apply EHCI device register functions
pcm051: Add inital support
Wolfram Sang (11):
mtd: drop custom is_power_of_2()
lib: misc: add 'iB' suffixes to strtoull_suffix
lib: update size_human_readable to latest version
ubi: consolidate ubi-media.h
ubi: bump ubi-media.h to newest version
devfs & mtd: add MEMERASE ioctl support
mtd: utils: apply macros for message printouts
lib: add libscan
lib: add libubigen
lib: add barebox version of libmtd
commands: add ubiformat
Makefile | 13 +-
arch/arm/Kconfig | 2 +-
arch/arm/Makefile | 3 +
arch/arm/boards/archosg9/board.c | 21 +-
arch/arm/boards/at91rm9200ek/init.c | 3 +-
arch/arm/boards/at91sam9260ek/init.c | 8 +-
arch/arm/boards/at91sam9261ek/init.c | 7 +-
arch/arm/boards/at91sam9263ek/init.c | 7 +-
arch/arm/boards/at91sam9m10g45ek/init.c | 6 +-
arch/arm/boards/at91sam9n12ek/init.c | 11 +-
arch/arm/boards/at91sam9x5ek/init.c | 12 +-
arch/arm/boards/beagle/board.c | 51 +-
arch/arm/boards/beaglebone/Makefile | 1 +
arch/arm/boards/beaglebone/board.c | 357 +++++++++
arch/arm/boards/beaglebone/config.h | 17 +
arch/arm/boards/beaglebone/env/boot/sd | 11 +
arch/arm/boards/beaglebone/env/config | 21 +
arch/arm/boards/crystalfontz-cfa10036/Makefile | 2 +-
arch/arm/boards/crystalfontz-cfa10036/cfa10036.c | 27 +
.../boards/crystalfontz-cfa10036/env/boot/mmc-ext3 | 4 +-
arch/arm/boards/crystalfontz-cfa10036/hwdetect.c | 96 +++
arch/arm/boards/crystalfontz-cfa10036/hwdetect.h | 22 +
arch/arm/boards/dss11/init.c | 13 +-
arch/arm/boards/efika-mx-smartbook/Makefile | 3 +
arch/arm/boards/efika-mx-smartbook/board.c | 510 +++++++++++++
arch/arm/boards/efika-mx-smartbook/config.h | 17 +
arch/arm/boards/efika-mx-smartbook/dcd-data.h | 56 ++
.../boards/efika-mx-smartbook/env/bin/lvds_init | 22 +
.../boards/efika-mx-smartbook/env/boot/hd-internal | 17 +
.../boards/efika-mx-smartbook/env/boot/mmc-left | 19 +
arch/arm/boards/efika-mx-smartbook/env/config | 29 +
.../boards/efika-mx-smartbook/env/init/automount | 29 +
.../boards/efika-mx-smartbook/env/init/bootsource | 10 +
.../efika-mx-smartbook/env/init/config-board | 9 +
.../efika-mx-smartbook/env/network/eth0-discover | 4 +
arch/arm/boards/efika-mx-smartbook/flash_header.c | 29 +
arch/arm/boards/karo-tx25/lowlevel.c | 5 +-
arch/arm/boards/mmccpu/init.c | 2 +-
arch/arm/boards/omap343xdsp/board.c | 47 +-
arch/arm/boards/omap3evm/board.c | 55 +-
arch/arm/boards/panda/board.c | 26 +-
arch/arm/boards/pcm037/Makefile | 4 +-
arch/arm/boards/pcm037/env/boot/nand-ubi | 10 +
arch/arm/boards/pcm037/env/config | 52 --
arch/arm/boards/pcm037/env/init/config-board | 7 +
arch/arm/boards/pcm037/env/init/mtdparts-nand | 11 +
arch/arm/boards/pcm037/env/init/mtdparts-nor | 11 +
arch/arm/boards/pcm037/lowlevel.c | 162 ++++
arch/arm/boards/pcm037/lowlevel_init.S | 170 -----
arch/arm/boards/pcm037/pcm037.c | 48 +-
arch/arm/boards/pcm038/pcm970.c | 42 +-
arch/arm/boards/pcm049/board.c | 24 +-
arch/arm/boards/pcm051/Makefile | 1 +
arch/arm/boards/pcm051/board.c | 64 ++
arch/arm/boards/pcm051/config.h | 21 +
arch/arm/boards/pcm051/env/boot/sd | 10 +
arch/arm/boards/pcm051/env/config | 22 +
arch/arm/boards/phycard-a-l1/pca-a-l1.c | 59 +-
arch/arm/boards/phycard-a-xl2/pca-a-xl2.c | 24 +-
arch/arm/boards/pm9261/init.c | 7 +-
arch/arm/boards/pm9263/init.c | 9 +-
arch/arm/boards/pm9g45/init.c | 9 +-
arch/arm/boards/qil-a9260/init.c | 7 +-
arch/arm/boards/tny-a926x/init.c | 9 +-
arch/arm/boards/usb-a926x/init.c | 8 +-
arch/arm/configs/am335x_beaglebone_defconfig | 54 ++
.../configs/am335x_beaglebone_mlo_large_defconfig | 55 ++
.../configs/am335x_beaglebone_mlo_small_defconfig | 31 +
arch/arm/configs/at91sam9n12ek_defconfig | 1 -
arch/arm/configs/cfa10036_defconfig | 3 +-
arch/arm/configs/efika-mx-smartbook_defconfig | 108 +++
arch/arm/configs/eukrea_cpuimx51_defconfig | 1 -
arch/arm/configs/pcm027_defconfig | 1 -
arch/arm/configs/pcm037_defconfig | 32 +-
arch/arm/configs/pcm038_defconfig | 10 +-
arch/arm/configs/pcm051_defconfig | 56 ++
arch/arm/cpu/cache-armv7.S | 2 +
arch/arm/cpu/mmu.c | 2 +-
arch/arm/mach-at91/Kconfig | 121 ++-
arch/arm/mach-at91/Makefile | 21 +-
arch/arm/mach-at91/at91rm9200.c | 47 +-
arch/arm/mach-at91/at91rm9200_devices.c | 10 +-
arch/arm/mach-at91/at91rm9200_lowlevel_init.c | 18 +-
arch/arm/mach-at91/at91sam9260.c | 36 +-
arch/arm/mach-at91/at91sam9260_devices.c | 14 +-
arch/arm/mach-at91/at91sam9261.c | 38 +-
arch/arm/mach-at91/at91sam9261_devices.c | 14 +-
arch/arm/mach-at91/at91sam9263.c | 47 +-
arch/arm/mach-at91/at91sam9263_devices.c | 16 +-
arch/arm/mach-at91/at91sam926x_lowlevel_init.c | 28 +-
arch/arm/mach-at91/at91sam926x_time.c | 68 +-
arch/arm/mach-at91/at91sam9g45.c | 46 +-
arch/arm/mach-at91/at91sam9g45_devices.c | 20 +-
arch/arm/mach-at91/at91sam9n12.c | 42 +-
arch/arm/mach-at91/at91sam9n12_devices.c | 14 +-
arch/arm/mach-at91/at91sam9x5.c | 42 +-
arch/arm/mach-at91/at91sam9x5_devices.c | 14 +-
arch/arm/mach-at91/clock.c | 50 +-
arch/arm/mach-at91/generic.h | 25 +
arch/arm/mach-at91/gpio.c | 752 ++++++++++++++-----
arch/arm/mach-at91/include/mach/at91_dbgu.h | 26 +-
arch/arm/mach-at91/include/mach/at91_pit.h | 8 +-
arch/arm/mach-at91/include/mach/at91_pmc.h | 48 +-
arch/arm/mach-at91/include/mach/at91_wdt.h | 6 +-
arch/arm/mach-at91/include/mach/at91rm9200.h | 22 +-
arch/arm/mach-at91/include/mach/at91sam9260.h | 37 +-
arch/arm/mach-at91/include/mach/at91sam9261.h | 34 +-
arch/arm/mach-at91/include/mach/at91sam9263.h | 52 +-
arch/arm/mach-at91/include/mach/at91sam9_smc.h | 50 +-
arch/arm/mach-at91/include/mach/at91sam9g45.h | 44 +-
arch/arm/mach-at91/include/mach/at91sam9n12.h | 43 +-
arch/arm/mach-at91/include/mach/at91sam9x5.h | 43 +-
arch/arm/mach-at91/include/mach/board.h | 13 +-
arch/arm/mach-at91/include/mach/cpu.h | 190 +++--
arch/arm/mach-at91/include/mach/debug_ll.h | 6 +-
arch/arm/mach-at91/include/mach/gpio.h | 402 +++++-----
arch/arm/mach-at91/include/mach/hardware.h | 8 +
arch/arm/mach-at91/include/mach/sam9_smc.h | 33 -
arch/arm/mach-at91/sam9_smc.c | 146 +++-
arch/arm/mach-at91/setup.c | 226 ++++++
arch/arm/mach-at91/soc.h | 66 ++
arch/arm/mach-bcm2835/core.c | 2 +
arch/arm/mach-imx/Kconfig | 9 +
arch/arm/mach-imx/devices.c | 5 +
arch/arm/mach-imx/imx25.c | 1 +
arch/arm/mach-imx/imx27.c | 1 +
arch/arm/mach-imx/imx31.c | 1 +
arch/arm/mach-imx/imx51.c | 1 +
arch/arm/mach-imx/include/mach/devices-imx27.h | 15 +
arch/arm/mach-imx/include/mach/devices-imx31.h | 25 +
arch/arm/mach-imx/include/mach/devices-imx51.h | 15 +
arch/arm/mach-imx/include/mach/devices.h | 2 +
arch/arm/mach-imx/include/mach/esdhc.h | 1 +
arch/arm/mach-imx/include/mach/iomux-mx31.h | 253 ++++++-
arch/arm/mach-imx/iomux-v2.c | 12 +-
arch/arm/mach-mxs/Kconfig | 3 +
arch/arm/mach-omap/Kconfig | 33 +-
arch/arm/mach-omap/Makefile | 4 +-
arch/arm/mach-omap/am33xx_clock.c | 289 ++++++++
arch/arm/mach-omap/am33xx_generic.c | 97 +++
arch/arm/mach-omap/am33xx_mux.c | 511 +++++++++++++
arch/arm/mach-omap/devices-gpmc-nand.c | 3 +-
arch/arm/mach-omap/dmtimer0.c | 89 +++
arch/arm/mach-omap/gpmc.c | 26 +-
arch/arm/mach-omap/include/mach/am33xx-clock.h | 194 +++++
arch/arm/mach-omap/include/mach/am33xx-devices.h | 33 +
arch/arm/mach-omap/include/mach/am33xx-mux.h | 23 +
arch/arm/mach-omap/include/mach/am33xx-silicon.h | 166 +++++
arch/arm/mach-omap/include/mach/clocks.h | 7 -
arch/arm/mach-omap/include/mach/control.h | 4 +-
arch/arm/mach-omap/include/mach/debug_ll.h | 9 +-
arch/arm/mach-omap/include/mach/devices.h | 14 +
arch/arm/mach-omap/include/mach/gpmc.h | 4 +-
arch/arm/mach-omap/include/mach/omap3-clock.h | 4 +-
arch/arm/mach-omap/include/mach/omap3-devices.h | 69 +-
arch/arm/mach-omap/include/mach/omap3-silicon.h | 142 ++--
arch/arm/mach-omap/include/mach/omap3-smx.h | 16 +-
arch/arm/mach-omap/include/mach/omap4-clock.h | 6 +-
arch/arm/mach-omap/include/mach/omap4-devices.h | 87 +++
arch/arm/mach-omap/include/mach/omap4-silicon.h | 42 +-
arch/arm/mach-omap/include/mach/sdrc.h | 2 +-
arch/arm/mach-omap/include/mach/silicon.h | 33 -
arch/arm/mach-omap/include/mach/sys_info.h | 1 -
arch/arm/mach-omap/include/mach/timers.h | 4 -
arch/arm/mach-omap/include/mach/wdt.h | 4 +-
arch/arm/mach-omap/include/mach/xload.h | 1 +
arch/arm/mach-omap/omap3_clock.c | 249 ++++---
arch/arm/mach-omap/omap3_core.S | 2 +-
arch/arm/mach-omap/omap3_generic.c | 60 +-
arch/arm/mach-omap/omap4_clock.c | 3 +-
arch/arm/mach-omap/omap4_generic.c | 6 +-
arch/arm/mach-omap/omap_devices.c | 32 +
arch/arm/mach-omap/s32k_clksource.c | 18 +-
arch/arm/mach-omap/xload.c | 2 +
arch/mips/Makefile | 18 +
.../qemu-malta/include/board/board_pbl_start.h | 34 +
arch/mips/boot/Makefile | 2 +
arch/mips/boot/main_entry-pbl.c | 87 +++
arch/mips/boot/start-pbl.S | 46 ++
arch/mips/configs/qemu-malta_defconfig | 1 +
arch/mips/include/asm/pbl_macros.h | 135 ++++
arch/mips/mach-malta/Kconfig | 2 +
arch/mips/pbl/.gitignore | 6 +
arch/mips/pbl/Makefile | 40 +
arch/mips/pbl/piggy.gzip.S | 6 +
arch/mips/pbl/piggy.lzo.S | 6 +
arch/mips/pbl/zbarebox.lds.S | 57 ++
arch/x86/Kconfig | 3 +
commands/Kconfig | 8 +
commands/Makefile | 1 +
commands/ubi.c | 2 +-
commands/ubiformat.c | 784 ++++++++++++++++++++
common/meminfo.c | 7 +-
common/memory.c | 4 +-
drivers/ata/ide-sff.c | 1 +
drivers/gpio/gpio.c | 126 +++-
drivers/input/gpio_keys.c | 2 +-
drivers/input/qt1070.c | 3 +-
drivers/led/core.c | 3 +
drivers/led/led-gpio.c | 67 +-
drivers/mci/Kconfig | 2 +-
drivers/mci/at91_mci.h | 121 ---
drivers/mci/atmel-mci-regs.h | 166 +++++
drivers/mci/atmel_mci.c | 391 ++++++----
drivers/mci/imx-esdhc.c | 3 +
drivers/mci/mci-core.c | 10 +-
drivers/mci/omap_hsmmc.c | 45 +-
drivers/mtd/core.c | 70 +-
drivers/mtd/nand/atmel_nand.c | 55 +-
drivers/mtd/nand/nand_omap_gpmc.c | 1 -
drivers/mtd/nand/nand_write.c | 10 +-
drivers/mtd/ubi/ubi-barebox.h | 5 +-
drivers/mtd/ubi/ubi-media.h | 369 ---------
drivers/mtd/ubi/ubi.h | 3 +-
drivers/of/base.c | 4 +-
drivers/spi/atmel_spi.c | 8 +
drivers/usb/Kconfig | 2 +
drivers/usb/Makefile | 1 +
drivers/usb/gadget/at91_udc.c | 11 +-
drivers/usb/host/Kconfig | 5 +
drivers/usb/host/ehci-hcd.c | 70 +-
drivers/usb/host/ehci-omap.c | 76 +-
drivers/usb/imx/Kconfig | 15 +
drivers/usb/imx/Makefile | 1 +
drivers/usb/imx/chipidea-imx.c | 91 +++
drivers/usb/imx/imx-usb-misc.c | 410 ++++++++++
drivers/usb/otg/ulpi.c | 33 +-
fs/devfs-core.c | 3 +-
include/common.h | 2 +-
include/gpio.h | 7 +
include/linux/w1-gpio.h | 4 +-
include/mci.h | 1 +
include/mfd/mc13892.h | 217 ++++++
include/mtd/libmtd.h | 149 ++++
include/mtd/libscan.h | 101 +++
include/mtd/libubigen.h | 182 +++++
include/{ => mtd}/ubi-media.h | 18 +-
include/mtd/utils.h | 47 ++
include/spi/spi.h | 2 +
include/usb/chipidea-imx.h | 46 ++
include/usb/ehci.h | 17 +-
include/usb/ulpi.h | 43 +-
lib/Kconfig | 9 +
lib/Makefile | 3 +
lib/display_options.c | 47 +-
lib/gui/graphic_utils.c | 2 +-
lib/libmtd.c | 368 +++++++++
lib/libscan.c | 219 ++++++
lib/libubigen.c | 312 ++++++++
lib/misc.c | 5 +-
pbl/string.c | 10 +-
scripts/Makefile.lib | 11 +
252 files changed, 10908 insertions(+), 2718 deletions(-)
create mode 100644 arch/arm/boards/beaglebone/Makefile
create mode 100644 arch/arm/boards/beaglebone/board.c
create mode 100644 arch/arm/boards/beaglebone/config.h
create mode 100644 arch/arm/boards/beaglebone/env/boot/sd
create mode 100644 arch/arm/boards/beaglebone/env/config
create mode 100644 arch/arm/boards/crystalfontz-cfa10036/hwdetect.c
create mode 100644 arch/arm/boards/crystalfontz-cfa10036/hwdetect.h
create mode 100644 arch/arm/boards/efika-mx-smartbook/Makefile
create mode 100644 arch/arm/boards/efika-mx-smartbook/board.c
create mode 100644 arch/arm/boards/efika-mx-smartbook/config.h
create mode 100644 arch/arm/boards/efika-mx-smartbook/dcd-data.h
create mode 100644 arch/arm/boards/efika-mx-smartbook/env/bin/lvds_init
create mode 100644 arch/arm/boards/efika-mx-smartbook/env/boot/hd-internal
create mode 100644 arch/arm/boards/efika-mx-smartbook/env/boot/mmc-left
create mode 100644 arch/arm/boards/efika-mx-smartbook/env/config
create mode 100644 arch/arm/boards/efika-mx-smartbook/env/init/automount
create mode 100644 arch/arm/boards/efika-mx-smartbook/env/init/bootsource
create mode 100644 arch/arm/boards/efika-mx-smartbook/env/init/config-board
create mode 100644 arch/arm/boards/efika-mx-smartbook/env/network/eth0-discover
create mode 100644 arch/arm/boards/efika-mx-smartbook/flash_header.c
create mode 100644 arch/arm/boards/pcm037/env/boot/nand-ubi
delete mode 100644 arch/arm/boards/pcm037/env/config
create mode 100644 arch/arm/boards/pcm037/env/init/config-board
create mode 100644 arch/arm/boards/pcm037/env/init/mtdparts-nand
create mode 100644 arch/arm/boards/pcm037/env/init/mtdparts-nor
create mode 100644 arch/arm/boards/pcm037/lowlevel.c
delete mode 100644 arch/arm/boards/pcm037/lowlevel_init.S
create mode 100644 arch/arm/boards/pcm051/Makefile
create mode 100644 arch/arm/boards/pcm051/board.c
create mode 100644 arch/arm/boards/pcm051/config.h
create mode 100644 arch/arm/boards/pcm051/env/boot/sd
create mode 100644 arch/arm/boards/pcm051/env/config
create mode 100644 arch/arm/configs/am335x_beaglebone_defconfig
create mode 100644 arch/arm/configs/am335x_beaglebone_mlo_large_defconfig
create mode 100644 arch/arm/configs/am335x_beaglebone_mlo_small_defconfig
create mode 100644 arch/arm/configs/efika-mx-smartbook_defconfig
create mode 100644 arch/arm/configs/pcm051_defconfig
delete mode 100644 arch/arm/mach-at91/include/mach/sam9_smc.h
create mode 100644 arch/arm/mach-at91/setup.c
create mode 100644 arch/arm/mach-at91/soc.h
create mode 100644 arch/arm/mach-omap/am33xx_clock.c
create mode 100644 arch/arm/mach-omap/am33xx_generic.c
create mode 100644 arch/arm/mach-omap/am33xx_mux.c
create mode 100644 arch/arm/mach-omap/dmtimer0.c
create mode 100644 arch/arm/mach-omap/include/mach/am33xx-clock.h
create mode 100644 arch/arm/mach-omap/include/mach/am33xx-devices.h
create mode 100644 arch/arm/mach-omap/include/mach/am33xx-mux.h
create mode 100644 arch/arm/mach-omap/include/mach/am33xx-silicon.h
create mode 100644 arch/arm/mach-omap/include/mach/devices.h
create mode 100644 arch/arm/mach-omap/include/mach/omap4-devices.h
delete mode 100644 arch/arm/mach-omap/include/mach/silicon.h
create mode 100644 arch/arm/mach-omap/omap_devices.c
create mode 100644 arch/mips/boards/qemu-malta/include/board/board_pbl_start.h
create mode 100644 arch/mips/boot/main_entry-pbl.c
create mode 100644 arch/mips/boot/start-pbl.S
create mode 100644 arch/mips/include/asm/pbl_macros.h
create mode 100644 arch/mips/pbl/.gitignore
create mode 100644 arch/mips/pbl/Makefile
create mode 100644 arch/mips/pbl/piggy.gzip.S
create mode 100644 arch/mips/pbl/piggy.lzo.S
create mode 100644 arch/mips/pbl/zbarebox.lds.S
create mode 100644 commands/ubiformat.c
delete mode 100644 drivers/mci/at91_mci.h
create mode 100644 drivers/mci/atmel-mci-regs.h
delete mode 100644 drivers/mtd/ubi/ubi-media.h
create mode 100644 drivers/usb/imx/Kconfig
create mode 100644 drivers/usb/imx/Makefile
create mode 100644 drivers/usb/imx/chipidea-imx.c
create mode 100644 drivers/usb/imx/imx-usb-misc.c
create mode 100644 include/mfd/mc13892.h
create mode 100644 include/mtd/libmtd.h
create mode 100644 include/mtd/libscan.h
create mode 100644 include/mtd/libubigen.h
rename include/{ => mtd}/ubi-media.h (96%)
create mode 100644 include/mtd/utils.h
create mode 100644 include/usb/chipidea-imx.h
create mode 100644 lib/libmtd.c
create mode 100644 lib/libscan.c
create mode 100644 lib/libubigen.c
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2013-02-04 14:52 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-02-04 14:51 v2013.02.0 Sascha Hauer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox