From: Steffen Trumtrar <s.trumtrar@pengutronix.de>
To: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: barebox@lists.infradead.org, Nicolas Ferre <nicolas.ferre@atmel.com>
Subject: Re: [PATCH 1/2] net: macb: remove gem_recv and reorder probe
Date: Wed, 13 Mar 2013 10:19:50 +0100 [thread overview]
Message-ID: <20130313091950.GD3891@pengutronix.de> (raw)
In-Reply-To: <20130313090336.GD1568@game.jcrosoft.org>
On Wed, Mar 13, 2013 at 10:03:36AM +0100, Jean-Christophe PLAGNIOL-VILLARD wrote:
> On 09:48 Wed 13 Mar , Steffen Trumtrar wrote:
> > The function gem_recv implements a buffer "ring" that stops at filling level 10.
> > That means, when the driver is used as gem, it stops receiving after exactly
> > 10 packets. Instead of implementing macb_recv twice, use it also for the gem
> > part. If there needs to be an extra recv function for the gigabit case, it can
> > be added than.
> > Also, first set the type of device (macb or gem) and then use functions that
> > use this info.
> >
> > Tested on a Zynq7000.
> NACK
>
> on gem we can receive the packet in one buffer the gem_recv implement this
> the macb can only receive splited buffer and then you have to reconstruct the
> packet
>
Okay. That is nice and all. But try receiving more than just 10 packets with
the current implementation.
Regards,
str
> Best Regards,
> J.
> >
> > Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
> > Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
> > Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
> > ---
> > drivers/net/macb.c | 47 +++++++----------------------------------------
> > 1 file changed, 7 insertions(+), 40 deletions(-)
> >
> > diff --git a/drivers/net/macb.c b/drivers/net/macb.c
> > index 8602437..a12eea7 100644
> > --- a/drivers/net/macb.c
> > +++ b/drivers/net/macb.c
> > @@ -169,37 +169,6 @@ static void reclaim_rx_buffers(struct macb_device *macb,
> > macb->rx_tail = new_tail;
> > }
> >
> > -static int gem_recv(struct eth_device *edev)
> > -{
> > - struct macb_device *macb = edev->priv;
> > - unsigned int rx_tail = macb->rx_tail;
> > - void *buffer;
> > - int length;
> > - u32 status;
> > -
> > - dev_dbg(macb->dev, "%s\n", __func__);
> > -
> > - for (;;) {
> > - barrier();
> > - if (!(macb->rx_ring[rx_tail].addr & MACB_BIT(RX_USED)))
> > - return -1;
> > -
> > - barrier();
> > - status = macb->rx_ring[rx_tail].ctrl;
> > - length = MACB_BFEXT(RX_FRMLEN, status);
> > - if (status & MACB_BIT(RX_SOF)) {
> > - buffer = macb->rx_buffer + macb->rx_buffer_size * macb->rx_tail;
> > - net_receive(buffer, length);
> > - macb->rx_ring[rx_tail].ctrl &= ~MACB_BIT(RX_USED);
> > - barrier();
> > - }
> > - rx_tail++;
> > - macb->rx_tail++;
> > - }
> > -
> > - return 0;
> > -}
> > -
> > static int macb_recv(struct eth_device *edev)
> > {
> > struct macb_device *macb = edev->priv;
> > @@ -619,11 +588,6 @@ static int macb_probe(struct device_d *dev)
> >
> > macb->phy_flags = pdata->phy_flags;
> >
> > - macb_init_rx_buffer_size(macb, PKTSIZE);
> > - macb->rx_buffer = dma_alloc_coherent(macb->rx_buffer_size * macb->rx_ring_size);
> > - macb->rx_ring = dma_alloc_coherent(RX_RING_BYTES(macb));
> > - macb->tx_ring = dma_alloc_coherent(TX_RING_BYTES);
> > -
> > macb->regs = dev_request_mem_region(dev, 0);
> >
> > /*
> > @@ -638,12 +602,15 @@ static int macb_probe(struct device_d *dev)
> >
> > clk_enable(macb->pclk);
> >
> > - if (macb_is_gem(macb))
> > - edev->recv = gem_recv;
> > - else
> > - edev->recv = macb_recv;
> > macb->is_gem = read_is_gem(macb);
> >
> > + macb_init_rx_buffer_size(macb, PKTSIZE);
> > + macb->rx_buffer = dma_alloc_coherent(macb->rx_buffer_size * macb->rx_ring_size);
> > + macb->rx_ring = dma_alloc_coherent(RX_RING_BYTES(macb));
> > + macb->tx_ring = dma_alloc_coherent(TX_RING_BYTES);
> > +
> > + edev->recv = macb_recv;
> > +
> > macb_reset_hw(macb);
> > ncfgr = macb_mdc_clk_div(macb);
> > ncfgr |= MACB_BIT(PAE); /* PAuse Enable */
> > --
> > 1.8.2.rc2
> >
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2013-03-13 9:19 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-13 8:48 Steffen Trumtrar
2013-03-13 8:48 ` [PATCH 2/2] net: macb: turn off endian_swp_pkt_en Steffen Trumtrar
2013-03-13 9:04 ` Jean-Christophe PLAGNIOL-VILLARD
2013-03-13 9:17 ` Steffen Trumtrar
2013-03-13 9:03 ` [PATCH 1/2] net: macb: remove gem_recv and reorder probe Jean-Christophe PLAGNIOL-VILLARD
2013-03-13 9:19 ` Steffen Trumtrar [this message]
2013-03-13 9:32 ` Jean-Christophe PLAGNIOL-VILLARD
2013-03-13 9:33 ` Jean-Christophe PLAGNIOL-VILLARD
2013-03-13 10:15 ` Sascha Hauer
2013-03-13 12:17 ` Jean-Christophe PLAGNIOL-VILLARD
2013-03-13 13:08 ` Steffen Trumtrar
2013-03-13 15:36 ` Jean-Christophe PLAGNIOL-VILLARD
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130313091950.GD3891@pengutronix.de \
--to=s.trumtrar@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=nicolas.ferre@atmel.com \
--cc=plagnioj@jcrosoft.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox