From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:6f8:1178:4:290:27ff:fe1d:cc33]) by merlin.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1UGOzL-0001h4-W1 for barebox@lists.infradead.org; Fri, 15 Mar 2013 07:23:41 +0000 Date: Fri, 15 Mar 2013 08:23:38 +0100 From: Sascha Hauer Message-ID: <20130315072338.GW1906@pengutronix.de> References: <1363097053-25784-1-git-send-email-t.gamez@phytec.de> MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: <1363097053-25784-1-git-send-email-t.gamez@phytec.de> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="iso-8859-15" Content-Transfer-Encoding: quoted-printable Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: [RFC PATCH 1/2] AM33XX: Move muxing defines to header file To: Teresa =?iso-8859-15?Q?G=E1mez?= Cc: barebox@lists.infradead.org On Tue, Mar 12, 2013 at 03:04:12PM +0100, Teresa G=E1mez wrote: > The muxing in the am33xx_mux.c file is not generic as the muxing > setup does not fit for every board. Move the structs and functions > to the mach/am33xx-mux.h so board dependend mux setups can be > created. > = > Signed-off-by: Teresa G=E1mez Applied, thanks Sascha > --- > arch/arm/boards/beaglebone/board.c | 4 +- > arch/arm/boards/beaglebone/lowlevel.c | 2 +- > arch/arm/boards/pcm051/board.c | 2 +- > arch/arm/mach-omap/am33xx_mux.c | 246 +-------------------= ------ > arch/arm/mach-omap/include/mach/am33xx-mux.h | 246 ++++++++++++++++++++= +++++- > 5 files changed, 252 insertions(+), 248 deletions(-) > = > diff --git a/arch/arm/boards/beaglebone/board.c b/arch/arm/boards/beagleb= one/board.c > index e4b8b0a..70c6070 100644 > --- a/arch/arm/boards/beaglebone/board.c > +++ b/arch/arm/boards/beaglebone/board.c > @@ -95,7 +95,7 @@ static void beaglebone_eth_init(void) > = > writel(0, AM33XX_MAC_MII_SEL); > = > - enable_mii1_pin_mux(); > + am33xx_enable_mii1_pin_mux(); > = > am33xx_add_cpsw(&cpsw_data); > } > @@ -104,7 +104,7 @@ static int beaglebone_devices_init(void) > { > am33xx_add_mmc0(NULL); > = > - enable_i2c0_pin_mux(); > + am33xx_enable_i2c0_pin_mux(); > beaglebone_eth_init(); > = > armlinux_set_bootparams((void *)0x80000100); > diff --git a/arch/arm/boards/beaglebone/lowlevel.c b/arch/arm/boards/beag= lebone/lowlevel.c > index 76ac90b..a9737d9 100644 > --- a/arch/arm/boards/beaglebone/lowlevel.c > +++ b/arch/arm/boards/beaglebone/lowlevel.c > @@ -243,7 +243,7 @@ static int beaglebone_board_init(void) > beaglebone_sram_init(); > = > /* Enable pin mux */ > - enable_uart0_pin_mux(); > + am33xx_enable_uart0_pin_mux(); > = > return 0; > } > diff --git a/arch/arm/boards/pcm051/board.c b/arch/arm/boards/pcm051/boar= d.c > index 9739a2c..a38d844 100644 > --- a/arch/arm/boards/pcm051/board.c > +++ b/arch/arm/boards/pcm051/board.c > @@ -52,7 +52,7 @@ mem_initcall(pcm051_mem_init); > = > static int pcm051_devices_init(void) > { > - enable_mmc0_pin_mux(); > + am33xx_enable_mmc0_pin_mux(); > = > am33xx_add_mmc0(NULL); > = > diff --git a/arch/arm/mach-omap/am33xx_mux.c b/arch/arm/mach-omap/am33xx_= mux.c > index 3d7f245..36fe379 100644 > --- a/arch/arm/mach-omap/am33xx_mux.c > +++ b/arch/arm/mach-omap/am33xx_mux.c > @@ -15,242 +15,12 @@ > #include > #include > #include > +#include > #include > = > #define MUX_CFG(value, offset) \ > __raw_writel(value, (AM33XX_CTRL_BASE + offset)); > = > -/* PAD Control Fields */ > -#define SLEWCTRL (0x1 << 6) > -#define RXACTIVE (0x1 << 5) > -#define PULLUP_EN (0x1 << 4) /* Pull UP Selection */ > -#define PULLUDEN (0x0 << 3) /* Pull up enabled */ > -#define PULLUDDIS (0x1 << 3) /* Pull up disabled */ > -#define MODE(val) val > - > -/* > - * PAD CONTROL OFFSETS > - * Field names corresponds to the pad signal name > - */ > -/* TODO replace with defines */ > -struct pad_signals { > - int gpmc_ad0; > - int gpmc_ad1; > - int gpmc_ad2; > - int gpmc_ad3; > - int gpmc_ad4; > - int gpmc_ad5; > - int gpmc_ad6; > - int gpmc_ad7; > - int gpmc_ad8; > - int gpmc_ad9; > - int gpmc_ad10; > - int gpmc_ad11; > - int gpmc_ad12; > - int gpmc_ad13; > - int gpmc_ad14; > - int gpmc_ad15; > - int gpmc_a0; > - int gpmc_a1; > - int gpmc_a2; > - int gpmc_a3; > - int gpmc_a4; > - int gpmc_a5; > - int gpmc_a6; > - int gpmc_a7; > - int gpmc_a8; > - int gpmc_a9; > - int gpmc_a10; > - int gpmc_a11; > - int gpmc_wait0; > - int gpmc_wpn; > - int gpmc_be1n; > - int gpmc_csn0; > - int gpmc_csn1; > - int gpmc_csn2; > - int gpmc_csn3; > - int gpmc_clk; > - int gpmc_advn_ale; > - int gpmc_oen_ren; > - int gpmc_wen; > - int gpmc_be0n_cle; > - int lcd_data0; > - int lcd_data1; > - int lcd_data2; > - int lcd_data3; > - int lcd_data4; > - int lcd_data5; > - int lcd_data6; > - int lcd_data7; > - int lcd_data8; > - int lcd_data9; > - int lcd_data10; > - int lcd_data11; > - int lcd_data12; > - int lcd_data13; > - int lcd_data14; > - int lcd_data15; > - int lcd_vsync; > - int lcd_hsync; > - int lcd_pclk; > - int lcd_ac_bias_en; > - int mmc0_dat3; > - int mmc0_dat2; > - int mmc0_dat1; > - int mmc0_dat0; > - int mmc0_clk; > - int mmc0_cmd; > - int mii1_col; > - int mii1_crs; > - int mii1_rxerr; > - int mii1_txen; > - int mii1_rxdv; > - int mii1_txd3; > - int mii1_txd2; > - int mii1_txd1; > - int mii1_txd0; > - int mii1_txclk; > - int mii1_rxclk; > - int mii1_rxd3; > - int mii1_rxd2; > - int mii1_rxd1; > - int mii1_rxd0; > - int rmii1_refclk; > - int mdio_data; > - int mdio_clk; > - int spi0_sclk; > - int spi0_d0; > - int spi0_d1; > - int spi0_cs0; > - int spi0_cs1; > - int ecap0_in_pwm0_out; > - int uart0_ctsn; > - int uart0_rtsn; > - int uart0_rxd; > - int uart0_txd; > - int uart1_ctsn; > - int uart1_rtsn; > - int uart1_rxd; > - int uart1_txd; > - int i2c0_sda; > - int i2c0_scl; > - int mcasp0_aclkx; > - int mcasp0_fsx; > - int mcasp0_axr0; > - int mcasp0_ahclkr; > - int mcasp0_aclkr; > - int mcasp0_fsr; > - int mcasp0_axr1; > - int mcasp0_ahclkx; > - int xdma_event_intr0; > - int xdma_event_intr1; > - int nresetin_out; > - int porz; > - int nnmi; > - int osc0_in; > - int osc0_out; > - int rsvd1; > - int tms; > - int tdi; > - int tdo; > - int tck; > - int ntrst; > - int emu0; > - int emu1; > - int osc1_in; > - int osc1_out; > - int pmic_power_en; > - int rtc_porz; > - int rsvd2; > - int ext_wakeup; > - int enz_kaldo_1p8v; > - int usb0_dm; > - int usb0_dp; > - int usb0_ce; > - int usb0_id; > - int usb0_vbus; > - int usb0_drvvbus; > - int usb1_dm; > - int usb1_dp; > - int usb1_ce; > - int usb1_id; > - int usb1_vbus; > - int usb1_drvvbus; > - int ddr_resetn; > - int ddr_csn0; > - int ddr_cke; > - int ddr_ck; > - int ddr_nck; > - int ddr_casn; > - int ddr_rasn; > - int ddr_wen; > - int ddr_ba0; > - int ddr_ba1; > - int ddr_ba2; > - int ddr_a0; > - int ddr_a1; > - int ddr_a2; > - int ddr_a3; > - int ddr_a4; > - int ddr_a5; > - int ddr_a6; > - int ddr_a7; > - int ddr_a8; > - int ddr_a9; > - int ddr_a10; > - int ddr_a11; > - int ddr_a12; > - int ddr_a13; > - int ddr_a14; > - int ddr_a15; > - int ddr_odt; > - int ddr_d0; > - int ddr_d1; > - int ddr_d2; > - int ddr_d3; > - int ddr_d4; > - int ddr_d5; > - int ddr_d6; > - int ddr_d7; > - int ddr_d8; > - int ddr_d9; > - int ddr_d10; > - int ddr_d11; > - int ddr_d12; > - int ddr_d13; > - int ddr_d14; > - int ddr_d15; > - int ddr_dqm0; > - int ddr_dqm1; > - int ddr_dqs0; > - int ddr_dqsn0; > - int ddr_dqs1; > - int ddr_dqsn1; > - int ddr_vref; > - int ddr_vtp; > - int ddr_strben0; > - int ddr_strben1; > - int ain7; > - int ain6; > - int ain5; > - int ain4; > - int ain3; > - int ain2; > - int ain1; > - int ain0; > - int vrefp; > - int vrefn; > -}; > - > -struct module_pin_mux { > - short reg_offset; > - unsigned char val; > -}; > - > -#define PAD_CTRL_BASE 0x800 > -#define OFFSET(x) (unsigned int) (&((struct pad_signals *) \ > - (PAD_CTRL_BASE))->x) > - > static const __maybe_unused struct module_pin_mux uart0_pin_mux[] =3D { > {OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART0_RXD */ > {OFFSET(uart0_txd), (MODE(0) | PULLUDEN)}, /* UART0_TXD */ > @@ -469,7 +239,7 @@ static const __maybe_unused struct module_pin_mux spi= 1_pin_mux[] =3D { > /* > * Configure the pin mux for the module > */ > -static void configure_module_pin_mux(const struct module_pin_mux *mod_pi= n_mux) > +void configure_module_pin_mux(const struct module_pin_mux *mod_pin_mux) > { > int i; > = > @@ -480,32 +250,32 @@ static void configure_module_pin_mux(const struct m= odule_pin_mux *mod_pin_mux) > MUX_CFG(mod_pin_mux[i].val, mod_pin_mux[i].reg_offset); > } > = > -void enable_mii1_pin_mux(void) > +void am33xx_enable_mii1_pin_mux(void) > { > configure_module_pin_mux(mii1_pin_mux); > } > = > -void enable_i2c0_pin_mux(void) > +void am33xx_enable_i2c0_pin_mux(void) > { > configure_module_pin_mux(i2c0_pin_mux); > } > = > -void enable_i2c1_pin_mux(void) > +void am33xx_enable_i2c1_pin_mux(void) > { > configure_module_pin_mux(i2c1_pin_mux); > } > = > -void enable_i2c2_pin_mux(void) > +void am33xx_enable_i2c2_pin_mux(void) > { > configure_module_pin_mux(i2c2_pin_mux); > } > = > -void enable_uart0_pin_mux(void) > +void am33xx_enable_uart0_pin_mux(void) > { > configure_module_pin_mux(uart0_pin_mux); > } > = > -void enable_mmc0_pin_mux(void) > +void am33xx_enable_mmc0_pin_mux(void) > { > configure_module_pin_mux(mmc0_pin_mux); > } > diff --git a/arch/arm/mach-omap/include/mach/am33xx-mux.h b/arch/arm/mach= -omap/include/mach/am33xx-mux.h > index 6078b3a..896e958 100644 > --- a/arch/arm/mach-omap/include/mach/am33xx-mux.h > +++ b/arch/arm/mach-omap/include/mach/am33xx-mux.h > @@ -13,11 +13,245 @@ > #ifndef __AM33XX_MUX_H__ > #define __AM33XX_MUX_H__ > = > -extern void enable_mii1_pin_mux(void); > -extern void enable_i2c0_pin_mux(void); > -extern void enable_i2c1_pin_mux(void); > -extern void enable_i2c2_pin_mux(void); > -extern void enable_uart0_pin_mux(void); > -extern void enable_mmc0_pin_mux(void); > +/* PAD Control Fields */ > +#define SLEWCTRL (0x1 << 6) > +#define RXACTIVE (0x1 << 5) > +#define PULLUP_EN (0x1 << 4) /* Pull UP Selection */ > +#define PULLUDEN (0x0 << 3) /* Pull up enabled */ > +#define PULLUDDIS (0x1 << 3) /* Pull up disabled */ > +#define MODE(val) val > + > +/* > + * PAD CONTROL OFFSETS > + * Field names corresponds to the pad signal name > + */ > +/* TODO replace with defines */ > +struct pad_signals { > + int gpmc_ad0; > + int gpmc_ad1; > + int gpmc_ad2; > + int gpmc_ad3; > + int gpmc_ad4; > + int gpmc_ad5; > + int gpmc_ad6; > + int gpmc_ad7; > + int gpmc_ad8; > + int gpmc_ad9; > + int gpmc_ad10; > + int gpmc_ad11; > + int gpmc_ad12; > + int gpmc_ad13; > + int gpmc_ad14; > + int gpmc_ad15; > + int gpmc_a0; > + int gpmc_a1; > + int gpmc_a2; > + int gpmc_a3; > + int gpmc_a4; > + int gpmc_a5; > + int gpmc_a6; > + int gpmc_a7; > + int gpmc_a8; > + int gpmc_a9; > + int gpmc_a10; > + int gpmc_a11; > + int gpmc_wait0; > + int gpmc_wpn; > + int gpmc_be1n; > + int gpmc_csn0; > + int gpmc_csn1; > + int gpmc_csn2; > + int gpmc_csn3; > + int gpmc_clk; > + int gpmc_advn_ale; > + int gpmc_oen_ren; > + int gpmc_wen; > + int gpmc_be0n_cle; > + int lcd_data0; > + int lcd_data1; > + int lcd_data2; > + int lcd_data3; > + int lcd_data4; > + int lcd_data5; > + int lcd_data6; > + int lcd_data7; > + int lcd_data8; > + int lcd_data9; > + int lcd_data10; > + int lcd_data11; > + int lcd_data12; > + int lcd_data13; > + int lcd_data14; > + int lcd_data15; > + int lcd_vsync; > + int lcd_hsync; > + int lcd_pclk; > + int lcd_ac_bias_en; > + int mmc0_dat3; > + int mmc0_dat2; > + int mmc0_dat1; > + int mmc0_dat0; > + int mmc0_clk; > + int mmc0_cmd; > + int mii1_col; > + int mii1_crs; > + int mii1_rxerr; > + int mii1_txen; > + int mii1_rxdv; > + int mii1_txd3; > + int mii1_txd2; > + int mii1_txd1; > + int mii1_txd0; > + int mii1_txclk; > + int mii1_rxclk; > + int mii1_rxd3; > + int mii1_rxd2; > + int mii1_rxd1; > + int mii1_rxd0; > + int rmii1_refclk; > + int mdio_data; > + int mdio_clk; > + int spi0_sclk; > + int spi0_d0; > + int spi0_d1; > + int spi0_cs0; > + int spi0_cs1; > + int ecap0_in_pwm0_out; > + int uart0_ctsn; > + int uart0_rtsn; > + int uart0_rxd; > + int uart0_txd; > + int uart1_ctsn; > + int uart1_rtsn; > + int uart1_rxd; > + int uart1_txd; > + int i2c0_sda; > + int i2c0_scl; > + int mcasp0_aclkx; > + int mcasp0_fsx; > + int mcasp0_axr0; > + int mcasp0_ahclkr; > + int mcasp0_aclkr; > + int mcasp0_fsr; > + int mcasp0_axr1; > + int mcasp0_ahclkx; > + int xdma_event_intr0; > + int xdma_event_intr1; > + int nresetin_out; > + int porz; > + int nnmi; > + int osc0_in; > + int osc0_out; > + int rsvd1; > + int tms; > + int tdi; > + int tdo; > + int tck; > + int ntrst; > + int emu0; > + int emu1; > + int osc1_in; > + int osc1_out; > + int pmic_power_en; > + int rtc_porz; > + int rsvd2; > + int ext_wakeup; > + int enz_kaldo_1p8v; > + int usb0_dm; > + int usb0_dp; > + int usb0_ce; > + int usb0_id; > + int usb0_vbus; > + int usb0_drvvbus; > + int usb1_dm; > + int usb1_dp; > + int usb1_ce; > + int usb1_id; > + int usb1_vbus; > + int usb1_drvvbus; > + int ddr_resetn; > + int ddr_csn0; > + int ddr_cke; > + int ddr_ck; > + int ddr_nck; > + int ddr_casn; > + int ddr_rasn; > + int ddr_wen; > + int ddr_ba0; > + int ddr_ba1; > + int ddr_ba2; > + int ddr_a0; > + int ddr_a1; > + int ddr_a2; > + int ddr_a3; > + int ddr_a4; > + int ddr_a5; > + int ddr_a6; > + int ddr_a7; > + int ddr_a8; > + int ddr_a9; > + int ddr_a10; > + int ddr_a11; > + int ddr_a12; > + int ddr_a13; > + int ddr_a14; > + int ddr_a15; > + int ddr_odt; > + int ddr_d0; > + int ddr_d1; > + int ddr_d2; > + int ddr_d3; > + int ddr_d4; > + int ddr_d5; > + int ddr_d6; > + int ddr_d7; > + int ddr_d8; > + int ddr_d9; > + int ddr_d10; > + int ddr_d11; > + int ddr_d12; > + int ddr_d13; > + int ddr_d14; > + int ddr_d15; > + int ddr_dqm0; > + int ddr_dqm1; > + int ddr_dqs0; > + int ddr_dqsn0; > + int ddr_dqs1; > + int ddr_dqsn1; > + int ddr_vref; > + int ddr_vtp; > + int ddr_strben0; > + int ddr_strben1; > + int ain7; > + int ain6; > + int ain5; > + int ain4; > + int ain3; > + int ain2; > + int ain1; > + int ain0; > + int vrefp; > + int vrefn; > +}; > + > +struct module_pin_mux { > + short reg_offset; > + unsigned char val; > +}; > + > +#define PAD_CTRL_BASE 0x800 > +#define OFFSET(x) (unsigned int) (&((struct pad_signals *) \ > + (PAD_CTRL_BASE))->x) > + > +extern void configure_module_pin_mux(const struct module_pin_mux *mod_pi= n_mux); > + > +/* Standard mux settings */ > +extern void am33xx_enable_mii1_pin_mux(void); > +extern void am33xx_enable_i2c0_pin_mux(void); > +extern void am33xx_enable_i2c1_pin_mux(void); > +extern void am33xx_enable_i2c2_pin_mux(void); > +extern void am33xx_enable_uart0_pin_mux(void); > +extern void am33xx_enable_mmc0_pin_mux(void); > = > #endif /*__AM33XX_MUX_H__ */ > -- = > 1.7.0.4 > = > = > _______________________________________________ > barebox mailing list > barebox@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/barebox -- = Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox