Re: [PATCH v3 08/10] tegra: add generic debug UART support

["antonynpavlov@gmail.com" <antonynpavlov@gmail.com>]

On Mon, 08 Apr 2013 14:24:06 +0200
Lucas Stach <dev@lynxeye.de> wrote:

> Am Montag, den 08.04.2013, 15:46 +0400 schrieb antonynpavlov@gmail.com:
> > On Mon, 08 Apr 2013 12:57:26 +0200
> > Lucas Stach <dev@lynxeye.de> wrote:
> > 
> > > Hi Antony,
> > > 
> > > Am Freitag, den 05.04.2013, 00:32 +0400 schrieb antonynpavlov@gmail.com:
> > > > On Tue,  2 Apr 2013 08:19:10 +0200
> > > > Lucas Stach <dev@lynxeye.de> wrote:
> > > > 
> > > > > ODMdata tells us which UART to use for debugging purposes. This is
> > > > > agreed upon in both the upstream Linux kernel and U-Boot, so do it the
> > > > > same way in barebox.
> > > > 
> > > > This patch disables serial console on my Toshiba AC100.
> > > > 
> > > Hm that's unfortunate, but I already suspected that your ODMdata might
> > > be wrong.
> > > What happens if you don't remove the serial init in your board? Do you
> > > get a duplicate serial, or just your board defined one? If it still
> > > works for you this way, we might take this as a compromise for now.
> > 
> > IMHO, the right way is to get of_serial.c from linux and put some records 
> > like this 
> >  uarta: serial@70006000 {
> >                 compatible = "nvidia,tegra20-uart";
> >                 reg = <0x70006000 0x40>;
> >                 reg-shift = <2>;
> >                 interrupts = <0 36 0x04>;
> >                 nvidia,dma-request-selector = <&apbdma 8>;
> >                 clocks = <&tegra_car 6>;
> >                 status = "disabled";
> >   };
> > 
> > to arch/arm/dts/tegra20.dtsi.
> > 
> 
> No, this doesn't help with the decision which UART barebox should use
> for it's output. This is a configuration option and therefore not
> allowed to reside in the DT, so NVIDIA decided to put this information
> into the ODMdata. Both U-Boot and the Linux kernel(for earlyconsole) use
> the information stored in this location.
> 
> You can always activate more consoles from board code or DT, but the
> first/debug console should IMHO be handled the same way it's done in
> Linux.

Yes, this doesn't help to select the console UART, but it provide  the
information about platform available UARTs.
The selection of console port is board-dependent (e.g. the chip can have
many UARTs, but the board can use only one of them), so let's move this
selection to board configuration section.

Moreother, Toshiba AC100 is a netbook (or smartbook :), in normal mode it
use keyboard and LCD screen for user interaction, not UART.

-- 
Best regards,
  Antony Pavlov

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox