From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:6f8:1178:4:290:27ff:fe1d:cc33]) by merlin.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1USRO3-0003Ky-7K for barebox@lists.infradead.org; Wed, 17 Apr 2013 12:22:55 +0000 Date: Wed, 17 Apr 2013 14:22:53 +0200 From: Sascha Hauer Message-ID: <20130417122253.GT1906@pengutronix.de> References: <1366188021.710900767@f16.mail.ru> <1366198829.567651896@f123.mail.ru> <20130417120233.GS1906@pengutronix.de> <1366201172.161158985@f388.i.mail.ru> MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: <1366201172.161158985@f388.i.mail.ru> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="iso-8859-15" Content-Transfer-Encoding: quoted-printable Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: Boot from SD fail after 2013.02 To: Alexander Shiyan Cc: barebox@lists.infradead.org On Wed, Apr 17, 2013 at 04:19:32PM +0400, Alexander Shiyan wrote: > > On Wed, Apr 17, 2013 at 03:40:29PM +0400, Alexander Shiyan wrote: > > > > On Wed, Apr 17, 2013 at 12:40:21PM +0400, Alexander Shiyan wrote: > > > > > Hello. > > > > > = > > > > > I found strange problem with boot from SD after 2013.02 release. > > > > > Using a git-bisect I found problem start point, so: > > > > > = > > > > > 8e19ee94ab7aea50635845de31daef1b593e1205 is the first bad commit > > > > > commit 8e19ee94ab7aea50635845de31daef1b593e1205 > > > > > Author: Sascha Hauer > > > > > Date:=A0=A0 Fri Jan 25 23:39:20 2013 +0100 > > > > > = > > > > > =A0=A0=A0 ARM: Setup stack at end of SDRAM > > > > > =A0=A0 =A0 > > > > > =A0=A0=A0 Signed-off-by: Sascha Hauer > > > > > = > > > > > = > > > > > Exploring this commit does not helps me to have any idea how it > > > > > depends on SD-boot. > > > > > My target is ARM imx51 ConnectCore board. > > > > > Also I test it with freescale_mx51_babbage_defconfig since some > > > > > stuff is compatible with ConnectCore board. > > > > > Can anyone confirm this issue or have a solution? > > > > = > > > > Without this patch applied, can you post the output of the 'iomem' > > > > command and confirm that the SDRAM size is detected correctly? > > > = > > > Memory size is correct, 256M. At this time I cannot run "iomem" since > > > I am restore the faulty part as a result of my games. > > = > > Does barebox still work 2nd stage or is this a 1st stage only problem? > = > PBL is not used in my config now and I think this is a lowlevel stuff > because serial is not inited and I cannot see any message. I was not asking about pbl, but only if you can start barebox from a running barebox. > I any case I cannot test more now due broken hardware. I return to > test this after repair. Thanks! ok. Sascha -- = Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox