From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: "Eric Bénard" <eric@eukrea.com>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH] nand_base: fix to test for JCPV problem
Date: Wed, 8 May 2013 18:41:58 +0200 [thread overview]
Message-ID: <20130508164158.GE1884@game.jcrosoft.org> (raw)
In-Reply-To: <1368030050-7989-1-git-send-email-eric@eukrea.com>
On 18:20 Wed 08 May , Eric Bénard wrote:
> Signed-off-by: Eric Bénard <eric@eukrea.com>
better but an other BUG
Board: Atmel at91sam9x5-ek
AT91: Detected soc type: at91sam9x5
AT91: Detected soc subtype: at91sam9x25
Clocks: CPU 400 MHz, master 133 MHz, main 12.000 MHz
netconsole: registered as cs2
CM: SAM9X25-CM [B2] from RONETIX
EK: SAM9x5-EK [B0] from FLEX
DM: SAM9x5-DM [B0] from FLEX
sn: 0x4010465, rev: 0x10421
atmel_nand: Use On Flash BBT
nand: ONFI flash detected ... nand: no valid ONFI param page found
nand: Manufacturer ID: 0xad, Chip ID: 0xda (Hynix NAND 256MiB 3,3V 8-bit), page size: 0, OOB size: 0
atmel_nand atmel_nand0: Initialize PMECC params, cap: 2, sector: 512
nand: No oob scheme defined for oobsize 0
BUG: failure at /opt/work/barebox/drivers/mtd/nand/nand_base.c:1483/nand_scan_tail()!
BUG!
> ---
> drivers/mtd/nand/nand_base.c | 20 +++++---------------
> 1 file changed, 5 insertions(+), 15 deletions(-)
>
> diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
> index e8103cf..d04e24b 100644
> --- a/drivers/mtd/nand/nand_base.c
> +++ b/drivers/mtd/nand/nand_base.c
> @@ -1167,10 +1167,9 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
>
> chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1);
>
> - /* Read manufacturer and device IDs */
> -
> - id_data[0] = chip->read_byte(mtd);
> - id_data[1] = chip->read_byte(mtd);
> + /* Read entire ID string */
> + for (i = 0; i < 8; i++)
> + id_data[i] = chip->read_byte(mtd);
>
> if (id_data[0] != *maf_id || id_data[1] != dev_id) {
> pr_err("%s: second ID read did not match "
> @@ -1190,20 +1189,11 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
> if (!type->name || !type->pagesize) {
> /* Check is chip is ONFI compliant */
> ret = nand_flash_detect_onfi(mtd, chip, &busw);
> - if (ret)
> goto ident_done;
> - else {
> - pr_err("NAND type unknown: %02x,%02x\n", *maf_id, dev_id);
> - return ERR_PTR(-ENODEV);
> - }
> }
>
> - chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1);
> -
> - /* Read entire ID string */
> -
> - for (i = 0; i < 8; i++)
> - id_data[i] = chip->read_byte(mtd);
> + if (!type->name)
> + return ERR_PTR(-ENODEV);
>
> if (!mtd->name)
> mtd->name = type->name;
> --
> 1.8.1.4
>
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2013-05-08 16:46 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-05-08 16:20 Eric Bénard
2013-05-08 16:41 ` Jean-Christophe PLAGNIOL-VILLARD [this message]
2013-05-08 17:05 ` Eric Bénard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130508164158.GE1884@game.jcrosoft.org \
--to=plagnioj@jcrosoft.com \
--cc=barebox@lists.infradead.org \
--cc=eric@eukrea.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox