From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:6f8:1178:4:290:27ff:fe1d:cc33]) by merlin.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1VC3mn-0003FK-3K for barebox@lists.infradead.org; Wed, 21 Aug 2013 08:29:02 +0000 Date: Wed, 21 Aug 2013 10:28:38 +0200 From: Sascha Hauer Message-ID: <20130821082838.GO31036@pengutronix.de> References: MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: Porting BareBox to Variscite iMX6 SOM To: Michael Burkey Cc: barebox@lists.infradead.org Hi Michael, On Tue, Aug 20, 2013 at 02:12:20PM -0400, Michael Burkey wrote: > Thank you Sascha for the additional information in your earlier post! > > Your comments on the imx-image method got me looking at the menuconfig > options and I located a simple mistake I had made when changing other > options (while manually editing some files, I had somehow managed to > inadvertently disable the "support internal boot" option). > > After fixing this, everything now works as I would expect. > > So, I now have the Variscite iMX6 SOM booted directly from SD to the > BareBox shell on UART1. Nice. That's good to hear ;) > > Now I just have to start pulling in all the other devices and getting > them configured properly! When doing so please start with a devicetree based board to copy-paste from. The imx6q-phytec-pbab01 should be a pretty good example. Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox