mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Jason Cooper <jason@lakedaemon.net>
To: Antony Pavlov <antonynpavlov@gmail.com>
Cc: barebox@lists.infradead.org
Subject: Re: [RFC 1/8] ARM: add very initial support for Canon DIGIC chips
Date: Mon, 26 Aug 2013 09:20:18 -0400	[thread overview]
Message-ID: <20130826132018.GF13964@titan.lakedaemon.net> (raw)
In-Reply-To: <1377493037-2229-2-git-send-email-antonynpavlov@gmail.com>

Hi Antony,

On Mon, Aug 26, 2013 at 08:57:10AM +0400, Antony Pavlov wrote:
> TODO: the clocksource driver need improvement!
> 
> Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
> ---
>  arch/arm/Kconfig                            |  9 ++++
>  arch/arm/Makefile                           |  1 +
>  arch/arm/dts/digic4.dtsi                    | 24 +++++++++++
>  arch/arm/mach-digic/Kconfig                 | 11 +++++
>  arch/arm/mach-digic/Makefile                |  2 +
>  arch/arm/mach-digic/core.c                  | 24 +++++++++++
>  arch/arm/mach-digic/csrc-timer.c            | 67 +++++++++++++++++++++++++++++
>  arch/arm/mach-digic/include/mach/debug_ll.h | 40 +++++++++++++++++
>  arch/arm/mach-digic/include/mach/digic4.h   | 29 +++++++++++++
>  arch/arm/mach-digic/include/mach/gpio.h     |  1 +
>  10 files changed, 208 insertions(+)
>  create mode 100644 arch/arm/dts/digic4.dtsi
>  create mode 100644 arch/arm/mach-digic/Kconfig
>  create mode 100644 arch/arm/mach-digic/Makefile
>  create mode 100644 arch/arm/mach-digic/core.c
>  create mode 100644 arch/arm/mach-digic/csrc-timer.c
>  create mode 100644 arch/arm/mach-digic/include/mach/debug_ll.h
>  create mode 100644 arch/arm/mach-digic/include/mach/digic4.h
>  create mode 100644 arch/arm/mach-digic/include/mach/gpio.h
> 
...
> diff --git a/arch/arm/mach-digic/include/mach/debug_ll.h b/arch/arm/mach-digic/include/mach/debug_ll.h
> new file mode 100644
> index 0000000..5f4579e
> --- /dev/null
> +++ b/arch/arm/mach-digic/include/mach/debug_ll.h
> @@ -0,0 +1,40 @@
> +/*
> + * Copyright (C) 2013 Antony Pavlov <antonynpavlov@gmail.com>
> + *
> + * This file is part of barebox.
> + * See file CREDITS for list of people who contributed to this project.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2
> + * as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#ifndef __MACH_DEBUG_LL_H__
> +#define __MACH_DEBUG_LL_H__
> +
> +#include <io.h>
> +#include <mach/digic4.h>
> +
> +#define DEBUG_LL_UART         DIGIC4_UART
> +
> +/* Serial interface registers */
> +#define DEBUG_LL_UART_TX         (DEBUG_LL_UART + 0x0)
> +#define DEBUG_LL_UART_ST         (DEBUG_LL_UART + 0x14)
> + #define UART_ST_TX_RDY	2

leading whitespace, and perhaps use BIT() here.

> +
> +static inline void PUTC_LL(char ch)
> +{
> +	while (!(readl(DEBUG_LL_UART_ST) & UART_ST_TX_RDY))
> +		; /* noop */
> +
> +	writel(0x06, DEBUG_LL_UART_ST);

could you use a macro here for 0x06?

> +	writel(ch, DEBUG_LL_UART_TX);
> +}
> +
> +#endif

thx,

Jason.

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2013-08-26 13:20 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-08-26  4:57 [RFC 0/8] barebox on Canon cameras: serial console and dts support Antony Pavlov
2013-08-26  4:57 ` [RFC 1/8] ARM: add very initial support for Canon DIGIC chips Antony Pavlov
2013-08-26 13:20   ` Jason Cooper [this message]
2013-08-26 18:51     ` Antony Pavlov
2013-08-26 19:47       ` Jason Cooper
2013-08-26 23:32         ` Sebastian Hesselbarth
2013-08-27  1:46           ` Jason Cooper
2013-08-27  4:57             ` Antony Pavlov
2013-08-27  7:00           ` Jürgen Beisert
2013-08-26  4:57 ` [RFC 2/8] serial: add driver for Canon DIGIC UART Antony Pavlov
2013-08-26 13:28   ` Jason Cooper
2013-08-26  4:57 ` [RFC 3/8] gpio: add driver for Canon DIGIC Antony Pavlov
2013-08-26  4:57 ` [RFC 4/8] ARM: DIGIC: add Canon PowerShot A1100 IS support Antony Pavlov
2013-08-26  4:57 ` [RFC 5/8] ARM: DIGIC: add canon-a1100_defconfig Antony Pavlov
2013-08-26  4:57 ` [RFC 6/8] ARM: DIGIC: add csrc-dummy Antony Pavlov
2013-08-26  4:57 ` [RFC 7/8] ARM: DIGIC: add Canon EOS 600D support Antony Pavlov
2013-08-26  4:57 ` [RFC 8/8] ARM: DIGIC: add canon-600d_defconfig Antony Pavlov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20130826132018.GF13964@titan.lakedaemon.net \
    --to=jason@lakedaemon.net \
    --cc=antonynpavlov@gmail.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox