From: Sascha Hauer <s.hauer@pengutronix.de>
To: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH 2/4] ARM: OMAP: register OMAP specific barebox bootm handler
Date: Fri, 27 Sep 2013 10:37:22 +0200 [thread overview]
Message-ID: <20130927083722.GM30088@pengutronix.de> (raw)
In-Reply-To: <20130927082537.GD32444@ns203013.ovh.net>
On Fri, Sep 27, 2013 at 10:25:37AM +0200, Jean-Christophe PLAGNIOL-VILLARD wrote:
> On 09:17 Fri 27 Sep , Sascha Hauer wrote:
> > The OMAP ROM code passes the boot information via r0 to the
> > bootloader. Add an OMAP specific barebox handler to pass this
> > information to the next stage. This allows us to chainload
> > bootloaders without loosing the information where we booted from.
>
> as you are working on the xload can test the patch I send to switch to the
> generic bootstap code
I could test them on the beaglebone, yes.
Sascha
>
> Best Regards,
> J.
> >
> > Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> > ---
> > arch/arm/mach-omap/include/mach/generic.h | 1 +
> > arch/arm/mach-omap/omap_generic.c | 52 +++++++++++++++++++++++++++++++
> > arch/arm/mach-omap/xload.c | 10 ++----
> > 3 files changed, 55 insertions(+), 8 deletions(-)
> >
> > diff --git a/arch/arm/mach-omap/include/mach/generic.h b/arch/arm/mach-omap/include/mach/generic.h
> > index ece8c2b..1cd7f04 100644
> > --- a/arch/arm/mach-omap/include/mach/generic.h
> > +++ b/arch/arm/mach-omap/include/mach/generic.h
> > @@ -56,6 +56,7 @@ static inline int omap_set_mmc_dev(const char *mmcdev)
> >
> > extern uint32_t omap_bootinfo[3];
> > void omap_save_bootinfo(void *data);
> > +void __noreturn omap_start_barebox(void *barebox);
> >
> > void omap_set_bootmmc_devname(const char *devname);
> > const char *omap_get_bootmmc_devname(void);
> > diff --git a/arch/arm/mach-omap/omap_generic.c b/arch/arm/mach-omap/omap_generic.c
> > index f024de6..595ecbe 100644
> > --- a/arch/arm/mach-omap/omap_generic.c
> > +++ b/arch/arm/mach-omap/omap_generic.c
> > @@ -15,12 +15,64 @@
> > #include <common.h>
> > #include <bootsource.h>
> > #include <envfs.h>
> > +#include <boot.h>
> > #include <init.h>
> > #include <io.h>
> > #include <fs.h>
> > #include <malloc.h>
> > #include <linux/stat.h>
> > #include <mach/generic.h>
> > +#include <mach/am33xx-silicon.h>
> > +#include <mach/omap3-silicon.h>
> > +#include <mach/omap4-silicon.h>
> > +
> > +static void *omap_sram_start(void)
> > +{
> > + if (cpu_is_am33xx())
> > + return (void *)AM33XX_SRAM0_START;
> > + if (cpu_is_omap34xx())
> > + return (void *)OMAP3_SRAM_BASE;
> > + if (cpu_is_omap4xxx())
> > + return (void *)OMAP44XX_SRAM_BASE;
> > +}
> > +
> > +void __noreturn omap_start_barebox(void *barebox)
> > +{
> > + int (*func)(void *) = barebox;
> > + uint32_t *arg;
> > + void *sramadr = omap_sram_start();
> > +
> > + arg = (uint32_t *)&omap_bootinfo;
> > +
> > + memcpy(sramadr, &omap_bootinfo, sizeof(uint32_t) * 3);
> > +
> > + shutdown_barebox();
> > + func(sramadr);
> > + hang();
> > +}
> > +
> > +static int do_bootm_omap_barebox(struct image_data *data)
> > +{
> > + void (*barebox)(uint32_t);
> > +
> > + barebox = read_file(data->os_file, NULL);
> > + if (!barebox)
> > + return -EINVAL;
> > +
> > + omap_start_barebox(barebox);
> > +}
> > +
> > +static struct image_handler omap_barebox_handler = {
> > + .name = "OMAP barebox",
> > + .bootm = do_bootm_omap_barebox,
> > + .filetype = filetype_arm_barebox,
> > +};
> > +
> > +static int omap_bootm_barebox(void)
> > +{
> > + return register_image_handler(&omap_barebox_handler);
> > +}
> > +device_initcall(omap_bootm_barebox);
> >
> > const static char *omap_bootmmc_dev;
> >
> > diff --git a/arch/arm/mach-omap/xload.c b/arch/arm/mach-omap/xload.c
> > index b4d1b55..69e3e42 100644
> > --- a/arch/arm/mach-omap/xload.c
> > +++ b/arch/arm/mach-omap/xload.c
> > @@ -188,8 +188,7 @@ static void *omap4_xload_boot_usb(void){
> > */
> > static __noreturn int omap_xload(void)
> > {
> > - int (*func)(void *) = NULL;
> > - uint32_t *arg;
> > + void *func;
> >
> > if (!barebox_part)
> > barebox_part = &default_part;
> > @@ -230,12 +229,7 @@ static __noreturn int omap_xload(void)
> > while (1);
> > }
> >
> > - arg = (uint32_t *)&omap_bootinfo;
> > -
> > - shutdown_barebox();
> > - func(arg);
> > -
> > - while (1);
> > + omap_start_barebox(func);
> > }
> >
> > int omap_set_barebox_part(struct omap_barebox_part *part)
> > --
> > 1.8.4.rc3
> >
> >
> > _______________________________________________
> > barebox mailing list
> > barebox@lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2013-09-27 8:37 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-27 7:17 OMAP patches Sascha Hauer
2013-09-27 7:17 ` [PATCH 1/4] ARM: OMAP: Add missing include Sascha Hauer
2013-09-27 7:17 ` [PATCH 2/4] ARM: OMAP: register OMAP specific barebox bootm handler Sascha Hauer
2013-09-27 8:25 ` Jean-Christophe PLAGNIOL-VILLARD
2013-09-27 8:37 ` Sascha Hauer [this message]
2013-09-27 7:17 ` [PATCH 3/4] ARM: OMAP: unconditionally use /boot/barebox.env Sascha Hauer
2013-09-27 7:17 ` [PATCH 4/4] i2c: omap: remove unncessary printf Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20130927083722.GM30088@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=plagnioj@jcrosoft.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox