mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: Renaud Barbier <renaud.barbier@ge.com>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH 4/5] ppc: DA923RC: add board support
Date: Wed, 30 Oct 2013 12:34:52 +0100	[thread overview]
Message-ID: <20131030113452.GG26639@ns203013.ovh.net> (raw)
In-Reply-To: <1383128571-8250-5-git-send-email-renaud.barbier@ge.com>

> +#include <environment.h>
> +#include <i2c/i2c.h>
> +#include <asm/fsl_ddr_sdram.h>
> +#include <asm/cache.h>
> +#include <mach/mmu.h>
> +#include <mach/mpc85xx.h>
> +#include <mach/immap_85xx.h>
> +#include <mach/gianfar.h>
> +#include <mach/clock.h>
> +#include <mach/fsl_i2c.h>
> +#include "product_data.h"
> +
> +#define BOARD_TYPE_NONE     0
> +#define BOARD_TYPE_DA923    1
> +#define BOARD_TYPE_GBX460   2
> +
> +static struct gfar_info_struct gfar_info[] = {
> +	{
> +	 .phyaddr = 7,
> +	 .tbiana = 0,
> +	 .tbicr = 0,
> +	 .mdiobus_tbi = 0,
> +	 },
> +};
> +
> +struct i2c_platform_data i2cplat = {
> +	.bitrate = 400000,
> +};
> +
> +static int board_eth_init(void)
> +{
> +	void __iomem *gur = IOMEM(MPC85xx_GUTS_ADDR);
> +	uint32_t gpoutdr = in_be32(gur + MPC85xx_GPOUTDR_OFFSET);
> +	struct ge_product_data product;
> +	int st;
> +
> +	/* Toggle eth0 reset pin */
> +	out_be32(gur + MPC85xx_GPOUTDR_OFFSET, (gpoutdr & ~MPC85xx_GPIOBIT(4)));
> +	udelay(5);
> +	out_be32(gur + MPC85xx_GPOUTDR_OFFSET, (gpoutdr | MPC85xx_GPIOBIT(4)));

why you don't use gio api here?
> +
> +	/* Disable eTSEC3 */
> +	out_be32(gur + MPC85xx_DEVDISR_OFFSET,
> +		 in_be32(gur + MPC85xx_DEVDISR_OFFSET) &
> +		 ~MPC85xx_DEVDISR_TSEC3);
> +
> +	st = ge_get_product_data(&product);
> +	if (((product.v2.mac.count > 0) && (product.v2.mac.count <= MAX_MAC)) &&
> +	    (st == 0))
> +		eth_register_ethaddr(0, (const char *)&product.v2.mac.mac[0]);
> +
> +	fsl_eth_init(1, &gfar_info[0]);
> +
> +	return 0;
> +}
> +
> +static int da923rc_devices_init(void)
> +{
> +	add_cfi_flash_device(0, 0xfe000000, 32 << 20, 0);
> +	devfs_add_partition("nor0", 0x0, 0x8000, DEVFS_PARTITION_FIXED, "env0");
> +	devfs_add_partition("nor0", 0x1f80000, 8 << 16, DEVFS_PARTITION_FIXED,
> +			    "self0");
> +
> +	add_generic_device("i2c-fsl", 0, NULL, I2C1_BASE_ADDR, 0x100,
> +			   IORESOURCE_MEM, &i2cplat);
> +	add_generic_device("i2c-fsl", 1, NULL, I2C2_BASE_ADDR, 0x100,
> +			   IORESOURCE_MEM, &i2cplat);

same pdata on both instance it's not really nice
> +
> +	board_eth_init();
> +
> +	return 0;
> +}
> +
> +device_initcall(da923rc_devices_init);
> +
> +static struct NS16550_plat serial_plat = {
> +	.clock = 0,
> +	.shift = 0,
> +};
> +
> +static int da923rc_console_init(void)
> +{
> +	serial_plat.clock = fsl_get_bus_freq(0);
> +	add_ns16550_device(1, CFG_CCSRBAR + 0x4600, 16, IORESOURCE_MEM_8BIT,
> +			   &serial_plat);
> +
> +	return 0;
> +}
> +
> +console_initcall(da923rc_console_init);
> +
> +static int da923rc_mem_init(void)
> +{
> +	barebox_add_memory_bank("ram0", 0x0, fsl_get_effective_memsize());
> +
> +	return 0;
> +}
> +
> +mem_initcall(da923rc_mem_init);
> +
> +static int checkboard(void)
> +{
> +	void __iomem *lbc = LBC_BASE_ADDR;
> +	void __iomem *ecm = IOMEM(MPC85xx_ECM_ADDR);
> +	void __iomem *i2c = IOMEM(I2C1_BASE_ADDR);
> +	int ret, board_type;
> +	uint8_t id, rev;
> +
> +	/* Clear LBC error interrupts */
> +	out_be32(lbc + FSL_LBC_LTESR_OFFSET, 0xffffffff);
> +	/* Enable LBC error interrupts */
> +	out_be32(lbc + FSL_LBC_LTEIR_OFFSET, 0xffffffff);
> +	/* Clear ecm errors */
> +	out_be32(ecm + MPC85xx_ECM_EEDR_OFFSET, 0xffffffff);
> +	/* Enable ecm errors */
> +	out_be32(ecm + MPC85xx_ECM_EEER_OFFSET, 0xffffffff);
> +
> +	fsl_i2c_init(0, 400000, 0x7f);
> +	/* Read board id from offset 0. */
> +	ret = fsl_i2c_read(i2c, 0x3b, 0, 1, &id, sizeof(uint8_t));
> +	fsl_i2c_stop(i2c);
> +
> +	if (ret == -1) {
> +		/* Enable I2C bus on GBX460. */
> +		out_be16(IOMEM(0xfc010020), 0);
> +		ret = fsl_i2c_read(i2c, 0x3b, 0, 1, &id, sizeof(uint8_t));
> +		fsl_i2c_stop(i2c);
why you do not simly use the standdard i2c AP?I
> +	}
> +
> +	if (ret == 0) {
> +		/*
> +		 * Board ID:
> +		 * 0-2 Hardware board revision
> +		 * 3-5 Board ID 000b/010b/100b - DA923, 001 - GBX460
> +		 * 6-7 Undefined 00
> +		 */
> +		rev = id & 7;
> +		id &= 0x38;
> +		id >>= 3;
> +
> +		switch (id) {
> +		case 0:
> +		case 2:
> +		case 4:
> +			board_type = BOARD_TYPE_DA923;
> +			break;
> +		case 1:
> +			board_type = BOARD_TYPE_GBX460;
> +			/* Enable all reset */
> +			out_be16(IOMEM(0xfc010044), 0xffff);
> +			break;
> +		default:
> +			board_type = BOARD_TYPE_NONE;
> +		}
> +	} else {
> +		board_type = BOARD_TYPE_NONE;
> +	}
> +
> +	return board_type;
> +}
> +
> +static int da923rc_board_init_r(void)
> +{
> +	void __iomem *gur = IOMEM(MPC85xx_GUTS_ADDR);
> +	void __iomem *pci = IOMEM(PCI1_BASE_ADDR);
> +	uint gpiocr = in_be32(gur + MPC85xx_GPIOCR_OFFSET);
> +	uint gpoutdr = in_be32(gur + MPC85xx_GPOUTDR_OFFSET);
> +	const unsigned int flashbase = (BOOT_BLOCK + 0x2000000);
> +	uint8_t flash_esel;
> +	int board_type;
> +
> +	flush_dcache();
> +	invalidate_icache();
> +
> +	/* Re-map boot flash */
> +	fsl_set_lbc_br(0, BR_PHYS_ADDR(0xfe000000) | BR_PS_16 | BR_V);
> +	fsl_set_lbc_or(0, 0xfe006e21);
> +
> +	/* Invalidate TLB entry for boot block */
> +	flash_esel = e500_find_tlb_idx((void *)flashbase, 1);
> +	e500_disable_tlb(flash_esel);
> +	flash_esel = e500_find_tlb_idx((void *)(flashbase + 0x1000000), 1);
> +	e500_disable_tlb(flash_esel);
> +
> +	/* Boot block back to cache inhibited. */
> +	e500_set_tlb(1, BOOT_BLOCK + (2 * 0x1000000),
> +		     BOOT_BLOCK + (2 * 0x1000000),
> +		     MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G | MAS2_M,
> +		     0, 2, BOOKE_PAGESZ_16M, 1);
> +	e500_set_tlb(1, BOOT_BLOCK + (3 * 0x1000000),
> +		     BOOT_BLOCK + (3 * 0x1000000),
> +		     MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G | MAS2_M,
> +		     0, 3, BOOKE_PAGESZ_16M, 1);
> +
> +	fsl_l2_cache_init();
> +
> +	/* Map CPLD */
> +	fsl_set_lbc_br(3, BR_PHYS_ADDR(0xfc010000) | BR_PS_16 | BR_V);
> +	fsl_set_lbc_or(3, 0xffffe001);
> +
> +	board_type = checkboard();
> +	if (board_type == BOARD_TYPE_DA923)
> +		barebox_set_model("DA923RC");
> +	else if (board_type == BOARD_TYPE_GBX460)
> +		barebox_set_model("GBX460");
> +	else
> +		barebox_set_model("Unknown");
> +
> +	/* Enable the GPIO Out pins */
> +	out_be32(gur + MPC85xx_GPIOCR_OFFSET, (gpiocr | MPC85xx_GPIOCR_GPOUT));
this should be GPIO API
> +
> +	/* Enable NOR low voltage programming (gpio 2) and write (gpio 3). */
> +	gpoutdr |= (MPC85xx_GPIOBIT(2) | MPC85xx_GPIOBIT(3));
> +
> +	/* Enable write to NAND flash */
> +	if (board_type == BOARD_TYPE_GBX460)
> +		gpoutdr |= MPC85xx_GPIOBIT(6);
> +
> +	/* Board reset and PHY reset. Disable CS3. */
> +	if (board_type == BOARD_TYPE_DA923) {
> +		fsl_set_lbc_br(3, 0);
> +		gpoutdr &= ~MPC85xx_GPIOBIT(0);
> +		gpoutdr |= MPC85xx_GPIOBIT(1);
> +	}
> +	out_be32(gur + MPC85xx_GPOUTDR_OFFSET, gpoutdr);
> +
> +	/* De-assert Board reset */
> +	if (board_type == BOARD_TYPE_DA923) {
> +		udelay(1000);
> +		gpoutdr |= MPC85xx_GPIOBIT(0);
> +		out_be32(gur + MPC85xx_GPOUTDR_OFFSET, gpoutdr);
> +	}
> +
> +	/* Enable PCI error reporting */
> +	out_be32(pci + 0xe00, 0x80000040);
> +	out_be32(pci + 0xe08, 0x6bf);
> +	out_be32(pci + 0xe0c, 0xbb1fa001);
> +	/* 32-bytes cacheline size */
> +	out_be32(pci, 0x8000000c);
> +	out_le32(pci + 4, 0x00008008);
> +
> +	return 0;
> +}
> +
> +core_initcall(da923rc_board_init_r);
> diff --git a/arch/ppc/boards/geip-da923rc/ddr.c b/arch/ppc/boards/geip-da923rc/ddr.c
> new file mode 100644
> index 0000000..c5d255d
> --- /dev/null
> +++ b/arch/ppc/boards/geip-da923rc/ddr.c
> @@ -0,0 +1,110 @@
> +/*
> + * Copyright 2013 GE Intelligent Platforms, Inc.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <common.h>
> +#include <mach/immap_85xx.h>
> +#include <mach/clock.h>
> +#include <asm/fsl_ddr_sdram.h>
> +#include <asm/fsl_ddr_dimm_params.h>
> +
> +static u8 spd_addr = 0x50;
> +
> +void fsl_ddr_board_info(struct ddr_board_info_s *info)
> +{
> +	info->fsl_ddr_ver = 0;
> +	info->ddr_base = IOMEM(MPC85xx_DDR_ADDR);
> +	/* Actual number of chip select used */
> +	info->cs_per_ctrl = 1;
> +	info->dimm_slots_per_ctrl = 1;
> +	info->i2c_bus = 0;
> +	info->i2c_slave = 0x7f;
> +	info->i2c_speed = 400000;
> +	info->i2c_base = IOMEM(I2C1_BASE_ADDR);
> +	info->spd_i2c_addr = &spd_addr;
> +}
> +
> +void fsl_ddr_board_options(struct memctl_options_s *popts,
> +			   struct dimm_params_s *pdimm)
> +{
> +	/*
> +	 * Clock adjustment in 1/8-cycle
> +	 *      0 = Clock is launched aligned with address/command
> +	 *      ...
> +	 *      6 = 3/4 cycle late
> +	 *      7 = 7/8 cycle late
> +	 *      8 = 1 cycle late
> +	 */
> +	popts->clk_adjust = 8;
> +
> +	/*
> +	 * /MCAS-to-preamble override. Defines the number of DRAM cycles
> +	 * between when a read is issued and when the corresponding DQS
> +	 * preamble is valid for the memory controller.
> +	 *
> +	 * Factors to consider for CPO:
> +	 *      - frequency
> +	 *      - ddr type
> +	 */
> +	popts->cpo_override = 9;
> +
> +	/*
> +	 * Write command to write data strobe timing adjustment.
> +	 * Factors to consider for write data delay:
> +	 *      - number of DIMMs
> +	 *
> +	 * 1 = 1/4 clock delay
> +	 * 2 = 1/2 clock delay
> +	 * 3 = 3/4 clock delay
> +	 * 4 = 1   clock delay
> +	 * 5 = 5/4 clock delay
> +	 * 6 = 3/2 clock delay
> +	 */
> +	popts->write_data_delay = 3;
> +
> +	/* 2T timing disabled. */
> +	popts->twoT_en = 0;
> +	if (pdimm->registered_dimm != 0)
> +		hang();
> +
> +	/*
> +	 * Factors to consider for half-strength driver enable:
> +	 *      - number of DIMMs installed
> +	 */
> +	popts->half_strength_driver_enable = 1;
> +
> +	/* Enable additive latency override. */
> +	popts->additive_latency_override = 1;
> +	popts->additive_latency_override_value = 1;
> +
> +	/* 50000ps is valid for a 16-bit wide data bus */
> +	popts->tFAW_window_four_activates_ps = 50000;
> +
> +	/* Enable ECC */
> +	popts->ECC_mode = 1;
> +	popts->data_init = 0;
> +
> +	/* DLL reset disable */
> +	popts->dll_rst_dis = 1;
> +
> +	/* Powerdown timings in number of tCK.  */
> +	popts->txard = 2;
> +	popts->txp = 2;
> +	popts->taxpd = 8;
> +
> +	/* Load mode timing in number of tCK. */
> +	popts->tmrd = 2;
> +
> +	/* Assert ODT only during writes to CSn */
> +	popts->cs_local_opts[0].odt_wr_cfg = FSL_DDR_ODT_CS;
> +}
> diff --git a/arch/ppc/boards/geip-da923rc/env/bin/init b/arch/ppc/boards/geip-da923rc/env/bin/init
> new file mode 100644
> index 0000000..6308999
> --- /dev/null
> +++ b/arch/ppc/boards/geip-da923rc/env/bin/init
> @@ -0,0 +1,4 @@
> +#!/bin/sh
> +export PATH=/env/bin
> +
> +source /env/config
> diff --git a/arch/ppc/boards/geip-da923rc/env/config b/arch/ppc/boards/geip-da923rc/env/config
> new file mode 100644
> index 0000000..79e2606
> --- /dev/null
> +++ b/arch/ppc/boards/geip-da923rc/env/config
> @@ -0,0 +1,4 @@
> +#!/bin/sh
> +export bootargs="root=/dev/nfs rw ip=bootp"
> +eth0.ipaddr=192.168.0.136
> +eth0.serverip=192.168.0.102
> diff --git a/arch/ppc/boards/geip-da923rc/law.c b/arch/ppc/boards/geip-da923rc/law.c
> new file mode 100644
> index 0000000..3d32c7e
> --- /dev/null
> +++ b/arch/ppc/boards/geip-da923rc/law.c
> @@ -0,0 +1,24 @@
> +/*
> + * Copyright 2013 GE Intelligent Platforms, Inc.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <common.h>
> +#include <asm/fsl_law.h>
> +
> +struct law_entry law_table[] = {
> +	FSL_SET_LAW(0xf8000000, LAW_SIZE_128M, LAW_TRGT_IF_LBC),
> +	FSL_SET_LAW(0xc0000000, LAW_SIZE_256M, LAW_TRGT_IF_PCI),
> +	FSL_SET_LAW(0xe1000000, LAW_SIZE_64K, LAW_TRGT_IF_PCI),
> +};
> +
> +int num_law_entries = ARRAY_SIZE(law_table);
> diff --git a/arch/ppc/boards/geip-da923rc/nand.c b/arch/ppc/boards/geip-da923rc/nand.c
> new file mode 100644
> index 0000000..550d790
> --- /dev/null
> +++ b/arch/ppc/boards/geip-da923rc/nand.c
> @@ -0,0 +1,94 @@
> +/*
> + * Copyright 2013 GE Intelligent Platforms, Inc
> + * (C) Copyright 2008 Wolfgang Grandegger <wg@denx.de>
> + * (C) Copyright 2006
> + * Thomas Waehner, TQ-System GmbH, thomas.waehner@tqs.de.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * This code only cares about setting up the UPM state machine for Linux
> + * to use the NAND.
> + */
> +
> +#include <common.h>
> +#include <init.h>
> +#include <asm/io.h>
> +#include <asm/fsl_lbc.h>
> +#include <mach/immap_85xx.h>
> +
> +/* NAND UPM tables for a 25Mhz bus frequency.  */
> +static const u32 upm_patt_25[] = {
> +	/* Single read data */
> +	0xcff02c30, 0x0ff02c30, 0x0ff02c34, 0x0ff32c30,
> +	0xfff32c31, 0xfff32c30, 0xfffffc30, 0xfffffc30,
> +	/* UPM Read Burst RAM array entry -> NAND Write CMD */
> +	0xcfaf2c30, 0x0faf2c30, 0x0faf2c30, 0x0fff2c34,
> +	0xfffffc31, 0xfffffc30, 0xfffffc30, 0xfffffc30,
> +	/* UPM Read Burst RAM array entry -> NAND Write ADDR */
> +	0xcfa3ec30, 0x0fa3ec30, 0x0fa3ec30, 0x0ff3ec34,
> +	0xfff3ec31, 0xfffffc30, 0xfffffc30, 0xfffffc30,
> +	/* UPM Write Single RAM array entry -> NAND Write Data */
> +	0x0ff32c30, 0x0fa32c30, 0x0fa32c34, 0x0ff32c30,
> +	0xfff32c31, 0xfff0fc30, 0xfff0fc30, 0xfff0fc30,
> +	/* Default */
> +	0xfff3fc30, 0xfff3fc30, 0xfff6fc30, 0xfffcfc30,
> +	0xfffcfc30, 0xfffcfc30, 0xfffcfc30, 0xfffcfc30,
> +	0xfffcfc30, 0xfffcfc30, 0xfffcfc30, 0xfffcfc30,
> +	0xfffdfc30, 0xfffffc30, 0xfffffc30, 0xfffffc31,
> +	0xfffffc30, 0xfffffc00, 0xfffffc00, 0xfffffc00,
> +	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc00,
> +	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
> +	0xfffffc00, 0xfffffc00, 0xfffffc00, 0xfffffc01,
> +};
> +
> +static void upm_write(uint8_t addr, uint32_t val)
> +{
> +	void __iomem *lbc = LBC_BASE_ADDR;
> +
> +	out_be32(lbc + FSL_LBC_MDR_OFFSET, val);
> +	clrsetbits_be32(lbc + FSL_LBC_MAMR_OFFSET, MxMR_MAD_MSK,
> +			MxMR_OP_WARR | (addr & MxMR_MAD_MSK));
> +
> +	/* dummy access to perform write */
> +	out_8(IOMEM(0xfc000000), 0);
> +	clrbits_be32(lbc + FSL_LBC_MAMR_OFFSET, MxMR_OP_WARR);
> +}
> +
> +static int board_nand_init(void)
> +{
> +	void __iomem *mxmr = IOMEM(LBC_BASE_ADDR + FSL_LBC_MAMR_OFFSET);
> +	int j;
> +
> +	/* Base register CS2:
> +	 * - 0xfc000000
> +	 * - 8-bit data width
> +	 * - UPMA
> +	 */
> +	fsl_set_lbc_br(2, BR_PHYS_ADDR(0xfc000000) | BR_PS_8 | BR_MS_UPMA |
> +		       BR_V);
> +
> +	/*
> +	 * Otions register:
> +	 * - 32KB window.
> +	 * - Buffer control disabled.
> +	 * - External address latch delay.
> +	 */
> +	fsl_set_lbc_or(2, 0xffffe001);
> +
> +	for (j = 0; j < 64; j++)
> +		upm_write(j, upm_patt_25[j]);
> +
> +	out_be32(mxmr, MxMR_OP_NORM | MxMR_GPL_x4DIS);
> +
> +	return 0;
> +}
> +
> +device_initcall(board_nand_init);
> diff --git a/arch/ppc/boards/geip-da923rc/product_data.c b/arch/ppc/boards/geip-da923rc/product_data.c
> new file mode 100644
> index 0000000..50cd1db
> --- /dev/null
> +++ b/arch/ppc/boards/geip-da923rc/product_data.c
> @@ -0,0 +1,64 @@
> +/*
> + * Copyright 2013 GE Intelligent Platforms Inc.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * Retrieve and check the product data.
> + */
> +
> +#include <common.h>
> +#include <i2c/i2c.h>
> +#include <mach/immap_85xx.h>
> +#include <mach/fsl_i2c.h>
> +#include "product_data.h"
> +
> +static int ge_is_data_valid(struct ge_product_data *v)
> +{
> +	int crc, ret = 0;
> +	const unsigned char *p = (const unsigned char *)v;
> +
> +	if (v->v1.pdh.tag != 0xa5a5)
> +		return -1;
> +
> +	switch (v->v1.pdh.version) {
> +	case PDVERSION_V1:
> +	case PDVERSION_V1bis:
> +		crc = crc32(0, p, sizeof(struct product_data_v1) - 4);
> +		if (crc != v->v1.crc32)
> +			ret = -1;
> +		break;
> +	case PDVERSION_V2:
> +		crc = crc32(0, p, sizeof(struct product_data_v2) - 4);
> +		if (crc != v->v2.crc32)
> +			ret = -1;
> +		break;
> +	default:
> +		ret = -1;
> +	}
> +
> +	return ret;
> +}
> +
> +int ge_get_product_data(struct ge_product_data *productp)
> +{
> +	void __iomem *i2c = IOMEM(I2C1_BASE_ADDR);
> +	int ret;
> +
> +	fsl_i2c_init(0, 400000, 0x7f);
> +	ret = fsl_i2c_read(i2c, 0x51, 0, 1, (uint8_t *) productp,
> +			   sizeof(struct ge_product_data));
> +	fsl_i2c_stop(i2c);
> +
> +	if (ret == 0)
> +		ret = ge_is_data_valid(productp);
> +
> +	return ret;
> +}
> diff --git a/arch/ppc/boards/geip-da923rc/product_data.h b/arch/ppc/boards/geip-da923rc/product_data.h
> new file mode 100644
> index 0000000..7348188
> --- /dev/null
> +++ b/arch/ppc/boards/geip-da923rc/product_data.h
> @@ -0,0 +1,56 @@
> +/*
> + * Copyright 2013 GE Intelligent Platforms, Inc.
> + *
> + * The product data structure and function prototypes.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#define MAX_MAC		8
> +enum product_data_version {
> +	PDVERSION_V1 = 1,
> +	PDVERSION_V1bis = 0x10,
> +	PDVERSION_V2 = 2,
> +	PDVERSION_MAX = PDVERSION_V2,
> +};
> +
> +struct __attribute__ ((__packed__)) product_data_header {
> +	unsigned short tag;
> +	unsigned char version;
> +	unsigned short len;
> +};
> +
> +struct __attribute__ ((__packed__)) mac {
> +	unsigned char count;
> +	unsigned char mac[MAX_MAC][6];
> +};
> +
> +struct __attribute__ ((__packed__)) product_data_v1 {
> +	struct product_data_header pdh;
> +	struct mac mac;
> +	int crc32;
> +};
> +
> +struct __attribute__ ((__packed__)) product_data_v2 {
> +	struct product_data_header pdh;
> +	struct mac mac;
> +	char sn[8];
> +	int crc32;
> +};
> +
> +struct __attribute__ ((__packed__)) ge_product_data {
> +	union {
> +		struct product_data_v1 v1;
> +		struct product_data_v2 v2;
> +	};
> +};
> +
> +extern int ge_get_product_data(struct ge_product_data *productp);
> diff --git a/arch/ppc/boards/geip-da923rc/tlb.c b/arch/ppc/boards/geip-da923rc/tlb.c
> new file mode 100644
> index 0000000..889e274
> --- /dev/null
> +++ b/arch/ppc/boards/geip-da923rc/tlb.c
> @@ -0,0 +1,69 @@
> +/*
> + * Copyright 2013 GE Intelligent Platforms, Inc.
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License as
> + * published by the Free Software Foundation; either version 2 of
> + * the License, or (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <common.h>
> +#include <mach/mmu.h>
> +
> +struct fsl_e_tlb_entry tlb_table[] = {
> +	/* TLB 0 - for temp stack in cache */
> +	FSL_SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR, CFG_INIT_RAM_ADDR,
> +			  MAS3_SX | MAS3_SW | MAS3_SR, 0,
> +			  0, 0, BOOKE_PAGESZ_4K, 0),
> +	FSL_SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + (4 * 1024),
> +			  CFG_INIT_RAM_ADDR + (4 * 1024),
> +			  MAS3_SX | MAS3_SW | MAS3_SR, 0,
> +			  0, 0, BOOKE_PAGESZ_4K, 0),
> +	FSL_SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + (8 * 1024),
> +			  CFG_INIT_RAM_ADDR + (8 * 1024),
> +			  MAS3_SX | MAS3_SW | MAS3_SR, 0,
> +			  0, 0, BOOKE_PAGESZ_4K, 0),
> +	FSL_SET_TLB_ENTRY(0, CFG_INIT_RAM_ADDR + (12 * 1024),
> +			  CFG_INIT_RAM_ADDR + (12 * 1024),
> +			  MAS3_SX | MAS3_SW | MAS3_SR, 0,
> +			  0, 0, BOOKE_PAGESZ_4K, 0),
> +	/*
> +	 * TLB 0/1:     2x16M     Cache inhibited, guarded
> +	 * CPLD and NAND in cache-inhibited area.
> +	 */
> +	FSL_SET_TLB_ENTRY(1, BOOT_BLOCK, BOOT_BLOCK,
> +			  MAS3_SX | MAS3_SW | MAS3_SR,
> +			  MAS2_W | MAS2_I | MAS2_G | MAS2_M,
> +			  0, 0, BOOKE_PAGESZ_16M, 1),
> +	FSL_SET_TLB_ENTRY(1, BOOT_BLOCK + 0x1000000,
> +			  BOOT_BLOCK + 0x1000000,
> +			  MAS3_SX | MAS3_SW | MAS3_SR,
> +			  MAS2_W | MAS2_I | MAS2_G | MAS2_M,
> +			  0, 1, BOOKE_PAGESZ_16M, 1),
> +	/*
> +	 * The boot flash is mapped with the cache enabled.
> +	 * TLB 2/3:     2x16M     Cacheable Write-through, guarded
> +	 */
> +	FSL_SET_TLB_ENTRY(1, BOOT_BLOCK + (2 * 0x1000000),
> +			  BOOT_BLOCK + (2 * 0x1000000),
> +			  MAS3_SX | MAS3_SW | MAS3_SR,
> +			  MAS2_W | MAS2_G | MAS2_M,
> +			  0, 2, BOOKE_PAGESZ_16M, 1),
> +	FSL_SET_TLB_ENTRY(1, BOOT_BLOCK + (3 * 0x1000000),
> +			  BOOT_BLOCK + (3 * 0x1000000),
> +			  MAS3_SX | MAS3_SW | MAS3_SR,
> +			  MAS2_W | MAS2_G | MAS2_M,
> +			  0, 3, BOOKE_PAGESZ_16M, 1),
> +
> +	FSL_SET_TLB_ENTRY(1, CFG_CCSRBAR, CFG_CCSRBAR_PHYS,
> +			  MAS3_SX | MAS3_SW | MAS3_SR,
> +			  MAS2_I | MAS2_G,
> +			  0, 4, BOOKE_PAGESZ_64M, 1),
> +};
> +
> +int num_tlb_entries = ARRAY_SIZE(tlb_table);
> diff --git a/arch/ppc/configs/da923rc_defconfig b/arch/ppc/configs/da923rc_defconfig
> new file mode 100644
> index 0000000..7007b65
> --- /dev/null
> +++ b/arch/ppc/configs/da923rc_defconfig
> @@ -0,0 +1,58 @@
> +CONFIG_ARCH_MPC85XX=y
> +CONFIG_DA923RC=y
> +CONFIG_BAREBOX_MAX_IMAGE_SIZE=0x80000
> +CONFIG_DEVEL=n
> +CONFIG_BANNER=y
> +CONFIG_CMD_READLINE=y
> +CONFIG_HUSH_GETOPT=y
> +CONFIG_LONGHELP=y
> +CONFIG_GLOB=y
> +CONFIG_CMDLINE_EDITING=y
> +CONFIG_AUTO_COMPLETE=y
> +CONFIG_CMD_PARTITION=y
> +CONFIG_CMD_BOOTM_ZLIB=y
> +CONFIG_CMD_BOOTM_BZLIB=y
> +CONFIG_ZLIB=y
> +CONFIG_BZLIB=y
> +CONFIG_CMD_EDIT=y
> +CONFIG_CMD_EXPORT=y
> +CONFIG_CMD_FLASH=y
> +CONFIG_CMD_GO=y
> +CONFIG_DEFAULT_ENVIRONMENT_GENERIC=n
> +CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/ppc/boards/geip-da923rc/env/"
> +CONFIG_CMD_LOADENV=y
> +CONFIG_CMD_PRINTENV=y
> +CONFIG_CMD_SAVEENV=y
> +CONFIG_CMD_READLINK=y
> +CONFIG_CMD_RESET=y
> +CONFIG_CMD_SLEEP=y
> +CONFIG_CMD_TIMEOUT=y
> +CONFIG_CMD_UNCOMPRESS=y
> +CONFIG_NET=y
> +CONFIG_NET_PING=y
> +CONFIG_NET_TFTP=y
> +CONFIG_NET_TFTP_PUSH=y
> +CONFIG_FS_TFTP=y
> +CONFIG_CMD_TFTP=y
> +CONFIG_DRIVER_NET_GIANFAR=y
> +CONFIG_CMD_MIITOOL=y
> +CONFIG_DRIVER_CFI=y
> +CONFIG_DRIVER_CFI_BANK_WIDTH_1=n
> +CONFIG_DRIVER_CFI_BANK_WIDTH_2=y
> +CONFIG_DRIVER_CFI_BANK_WIDTH_4=n
> +CONFIG_CFI_BUFFER_WRITE=y
> +CONFIG_MTD=y
> +CONFIG_MTD_WRITE=y
> +CONFIG_MALLOC_SIZE=0x2800000
> +CONFIG_PROMPT="GE> "
> +CONFIG_BAUDRATE=9600
> +CONFIG_RELOCATABLE=y
> +CONFIG_DRIVER_SERIAL_NS16550=y
> +CONFIG_SPI=n
> +CONFIG_I2C=y
> +CONFIG_I2C_IMX=y
> +CONFIG_CMD_I2C=y
> +CONFIG_CMD_VERSION=n
> +CONFIG_OFTREE=y
> +CONFIG_CMD_OFTREE_PROBE=y
> +CONFIG_CMD_OFTREE=y
> diff --git a/arch/ppc/include/asm/fsl_lbc.h b/arch/ppc/include/asm/fsl_lbc.h
> index 58cd080..a59725c 100644
> --- a/arch/ppc/include/asm/fsl_lbc.h
> +++ b/arch/ppc/include/asm/fsl_lbc.h
> @@ -27,6 +27,7 @@
>  #define BR_PS_32			0x00001800	/* Port Size 32 bit */
>  #define BR_V				0x00000001
>  #define BR_V_SHIFT			0
> +#define BR_MS_UPMA			0x00000080
>  
>  /* Convert an address into the right format for the BR registers */
>  #define BR_PHYS_ADDR(x) ((x) & 0xffff8000)
> @@ -55,5 +56,16 @@
>  #define fsl_set_lbc_br(x, v) (out_be32((LBC_BASE_ADDR + FSL_LBC_BRX(x)), v))
>  #define fsl_set_lbc_or(x, v) (out_be32((LBC_BASE_ADDR + FSL_LBC_ORX(x)), v))
>  
> +#define FSL_LBC_MAR_OFFSET	0x68
> +#define FSL_LBC_MAMR_OFFSET	0x70
> +#define FSL_LBC_MDR_OFFSET	0x88
> +#define FSL_LBC_LTESR_OFFSET	0xB0
> +#define FSL_LBC_LTEIR_OFFSET	0xB8
> +
> +#define MxMR_MAD_MSK		0x0000003f /* Machine Address Mask         */
> +#define MxMR_GPL_x4DIS		0x00040000 /* GPL_A4 Ouput Line Disable    */
> +#define MxMR_OP_NORM		0x00000000 /* Normal Operation             */
> +#define MxMR_OP_WARR		0x10000000 /* Write to Array               */
> +
>  #endif /* __ASSEMBLY__ */
>  #endif /* __ASM_PPC_FSL_LBC_H */
> diff --git a/arch/ppc/mach-mpc85xx/include/mach/immap_85xx.h b/arch/ppc/mach-mpc85xx/include/mach/immap_85xx.h
> index bef4e29..ff3a312 100644
> --- a/arch/ppc/mach-mpc85xx/include/mach/immap_85xx.h
> +++ b/arch/ppc/mach-mpc85xx/include/mach/immap_85xx.h
> @@ -32,6 +32,7 @@
>  #define MPC85xx_ECM_OFFSET	0x1000
>  #define MPC85xx_DDR_OFFSET	0x2000
>  #define MPC85xx_LBC_OFFSET	0x5000
> +#define MPC85xx_PCI1_OFFSET	0x8000
>  
>  #define MPC85xx_GPIO_OFFSET	0xf000
>  #define MPC85xx_L2_OFFSET	0x20000
> @@ -58,6 +59,8 @@
>  
>  /* ECM Registers */
>  #define MPC85xx_ECM_EEBPCR_OFFSET	0x00 /* ECM CCB Port Configuration */
> +#define MPC85xx_ECM_EEDR_OFFSET		0xE00 /* ECM error detect register  */
> +#define MPC85xx_ECM_EEER_OFFSET		0xE08 /* ECM error enable register  */
>  
>  /*
>   * DDR Memory Controller Register Offsets
> @@ -94,6 +97,9 @@
>  /* training init and extended addr */
>  #define MPC85xx_DDR_SDRAM_INIT_ADDR_OFFSET	0x148
>  #define MPC85xx_DDR_SDRAM_INIT_ADDR_EXT_OFFSET	0x14c
> +/* DDR IP block revision */
> +#define MPC85xx_DDR_IP_REV1_OFFSET	0xbf8
> +#define MPC85xx_DDR_IP_REV2_OFFSET	0xbfc
>  
>  #define DDR_OFF(REGNAME)	(MPC85xx_DDR_##REGNAME##_OFFSET)
>  
> @@ -102,6 +108,20 @@
>   */
>  #define MPC85xx_GPIO_GPDIR	0x00
>  #define MPC85xx_GPIO_GPDAT	0x08
> +#define MPC85xx_GPIO_GPDIR_OFFSET	0x00
> +#define MPC85xx_GPIO_GPDAT_OFFSET	0x08
> +
> +/* Global Utilities Registers */
> +#define MPC85xx_GPIOCR_OFFSET	0x30
> +#define		MPC85xx_GPIOCR_GPOUT	0x00000200
> +#define MPC85xx_GPOUTDR_OFFSET	0x40
> +#define		MPC85xx_GPIOBIT(i)	(1 << (31 - i))
> +#define MPC85xx_GPINDR_OFFSET	0x50
> +
> +#define MPC85xx_DEVDISR_OFFSET	0x70
> +#define		MPC85xx_DEVDISR_TSEC1	0x00000080
> +#define		MPC85xx_DEVDISR_TSEC2	0x00000040
> +#define		MPC85xx_DEVDISR_TSEC3	0x00000020
>  
>  /*
>   * L2 Cache Register Offsets
> @@ -125,6 +145,8 @@
>  #define MPC85xx_GUTS_PORPLLSR_OFFSET	0x0
>  #define		MPC85xx_PORPLLSR_DDR_RATIO		0x00003e00
>  #define		MPC85xx_PORPLLSR_DDR_RATIO_SHIFT	9
> +#define MPC85xx_GUTS_PORDEVSR2_OFFSET	0x14
> +#define		MPC85xx_PORDEVSR2_SEC_CFG		0x00000080
>  #define MPC85xx_GUTS_DEVDISR_OFFSET	0x70
>  #define		MPC85xx_DEVDISR_TB0	0x00004000
>  #define		MPC85xx_DEVDISR_TB1	0x00001000
> @@ -136,4 +158,5 @@
>  #define I2C1_BASE_ADDR		(CFG_IMMR + 0x3000)
>  #define I2C2_BASE_ADDR		(CFG_IMMR + 0x3100)
>  
> +#define PCI1_BASE_ADDR		(CFG_IMMR + MPC85xx_PCI1_OFFSET)
>  #endif /*__IMMAP_85xx__*/
> -- 
> 1.7.1
> 
> 
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2013-10-30 11:33 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-10-30 10:22 [PATCH v2 0/5] GEIP DA923RC " Renaud Barbier
2013-10-30 10:22 ` [PATCH 1/5] ppc: mpc85xx: mpc8544 support Renaud Barbier
2013-10-30 10:22 ` [PATCH 2/5] ppc: mpc85xx: define Ethernet port count Renaud Barbier
2013-10-30 10:22 ` [PATCH 3/5] ppc: mpc85xx: enable DDR driver Renaud Barbier
2013-10-30 10:22 ` [PATCH 4/5] ppc: DA923RC: add board support Renaud Barbier
2013-10-30 11:34   ` Jean-Christophe PLAGNIOL-VILLARD [this message]
2013-10-31  7:48     ` Sascha Hauer
2013-10-31 13:15       ` Renaud Barbier
2013-10-31 20:10       ` Renaud Barbier
2013-11-01 11:58         ` Sascha Hauer
2013-11-01 12:56           ` Renaud Barbier
2013-11-01 13:02             ` Renaud Barbier
2013-11-01 15:03               ` Renaud Barbier
2013-11-01 20:28                 ` Sascha Hauer
2013-11-04 18:06                   ` Renaud Barbier
2013-11-05  7:35                     ` Sascha Hauer
2013-10-31 14:41     ` Renaud Barbier
2013-10-31 16:01       ` Jean-Christophe PLAGNIOL-VILLARD
2013-10-31 18:59         ` Renaud Barbier
2013-10-30 10:22 ` [PATCH 5/5] ppc: mpc85xx: build directives Renaud Barbier
2013-11-05 15:36 [PATCH v3 0/5] GEIP DA923RC board support Renaud Barbier
2013-11-05 15:36 ` [PATCH 4/5] ppc: DA923RC: add " Renaud Barbier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20131030113452.GG26639@ns203013.ovh.net \
    --to=plagnioj@jcrosoft.com \
    --cc=barebox@lists.infradead.org \
    --cc=renaud.barbier@ge.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox