From: Sascha Hauer <s.hauer@pengutronix.de>
To: "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH] mci: mxs: support overwriting the device name via platform data
Date: Mon, 11 Nov 2013 11:16:41 +0100 [thread overview]
Message-ID: <20131111101641.GH24559@pengutronix.de> (raw)
In-Reply-To: <1383869517-25032-1-git-send-email-u.kleine-koenig@pengutronix.de>
On Fri, Nov 08, 2013 at 01:11:57AM +0100, Uwe Kleine-König wrote:
> The current implementation of the bootloader specification depends on the
> hardware name and the name of the device in /dev to match. As the default
> hardware name is mciX and the device name is diskY the bootloader spec
> cannot be used as is.
>
> This patch implements a way to overwrite the device name similar to what is
> possible for the imx-esdhc driver.
>
> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Applied, thanks
Sascha
> ---
>
> Notes:
> Changes since (implicit) v1, sent with
> Message-Id: 1383821462-29348-1-git-send-email-u.kleine-koenig@pengutronix.de:
>
> - don't check for pd->devname being non-NULL before assigment as suggested
> by Jean-Christophe.
>
> arch/arm/mach-mxs/include/mach/mci.h | 1 +
> drivers/mci/mxs.c | 1 +
> include/mci.h | 2 +-
> 3 files changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/mach-mxs/include/mach/mci.h b/arch/arm/mach-mxs/include/mach/mci.h
> index 4faab37..c47c24c 100644
> --- a/arch/arm/mach-mxs/include/mach/mci.h
> +++ b/arch/arm/mach-mxs/include/mach/mci.h
> @@ -15,6 +15,7 @@
> #define __MACH_MMC_H
>
> struct mxs_mci_platform_data {
> + const char *devname;
> unsigned caps; /**< supported operating modes (MMC_MODE_*) */
> unsigned voltages; /**< supported voltage range (MMC_VDD_*) */
> unsigned f_min; /**< min operating frequency in Hz (0 -> no limit) */
> diff --git a/drivers/mci/mxs.c b/drivers/mci/mxs.c
> index 1b935f7..bf928e8 100644
> --- a/drivers/mci/mxs.c
> +++ b/drivers/mci/mxs.c
> @@ -570,6 +570,7 @@ static int mxs_mci_probe(struct device_d *hw_dev)
> /* feed forward the platform specific values */
> host->voltages = pd->voltages;
> host->host_caps = pd->caps;
> + host->devname = pd->devname;
>
> mxs_mci->clk = clk_get(hw_dev, NULL);
> if (IS_ERR(mxs_mci->clk))
> diff --git a/include/mci.h b/include/mci.h
> index 07ac273..0f10e8a 100644
> --- a/include/mci.h
> +++ b/include/mci.h
> @@ -286,7 +286,7 @@ struct mci;
> struct mci_host {
> struct device_d *hw_dev; /**< the host MCI hardware device */
> struct mci *mci;
> - char *devname; /**< the devicename for the card, defaults to disk%d */
> + const char *devname; /**< the devicename for the card, defaults to disk%d */
> unsigned voltages;
> unsigned host_caps; /**< Host's interface capabilities, refer MMC_VDD_* */
> unsigned f_min; /**< host interface lower limit */
> --
> 1.8.4.rc3
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
prev parent reply other threads:[~2013-11-11 10:17 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-07 10:51 Uwe Kleine-König
2013-11-07 16:04 ` Jean-Christophe PLAGNIOL-VILLARD
2013-11-08 0:11 ` Uwe Kleine-König
2013-11-11 10:16 ` Sascha Hauer [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20131111101641.GH24559@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=u.kleine-koenig@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox