From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:6f8:1178:4:290:27ff:fe1d:cc33]) by merlin.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1VpwEC-0006vd-7v for barebox@lists.infradead.org; Mon, 09 Dec 2013 08:30:09 +0000 Date: Mon, 9 Dec 2013 09:29:45 +0100 From: Sascha Hauer Message-ID: <20131209082945.GJ24559@pengutronix.de> References: <1386357468-26892-1-git-send-email-r.schwebel@pengutronix.de> <1386357468-26892-2-git-send-email-r.schwebel@pengutronix.de> MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: <1386357468-26892-2-git-send-email-r.schwebel@pengutronix.de> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: [PATCH 1/3] ARM: i.MX6: tqma6x: dts: move FEC enablement to baseboard To: Robert Schwebel Cc: barebox@lists.infradead.org On Fri, Dec 06, 2013 at 08:17:46PM +0100, Robert Schwebel wrote: > The definition if the FEC is used is made by the baseboard (MBa6x), not > by the module (TQMa6x). Move it there. > > Signed-off-by: Robert Schwebel > --- > arch/arm/dts/imx6q-mba6x.dts | 4 ++++ > arch/arm/dts/imx6q-tqma6x.dts | 2 +- > 2 files changed, 5 insertions(+), 1 deletion(-) > > diff --git a/arch/arm/dts/imx6q-mba6x.dts b/arch/arm/dts/imx6q-mba6x.dts > index 69d46b4..e057fc4 100644 > --- a/arch/arm/dts/imx6q-mba6x.dts > +++ b/arch/arm/dts/imx6q-mba6x.dts > @@ -26,6 +26,10 @@ > }; > }; > > +&fec { > + status = "okay"; > +}; > + This is the wrong file, it's the baseboard for the i.MX6q module only. Added it to imx6qdl-mba6x.dtsi instead. > &iomuxc { > pinctrl-names = "default"; > pinctrl-0 = <&pinctrl_hog>; > diff --git a/arch/arm/dts/imx6q-tqma6x.dts b/arch/arm/dts/imx6q-tqma6x.dts > index 597388e..f556381 100644 > --- a/arch/arm/dts/imx6q-tqma6x.dts > +++ b/arch/arm/dts/imx6q-tqma6x.dts > @@ -81,7 +81,7 @@ > pinctrl-names = "default"; > pinctrl-0 = <&pinctrl_enet_1>; > phy-mode = "rgmii"; > - status = "okay"; > + status = "disabled"; This is the file you remove in 3/3. Applied this change to imx6qdl-tqma6x.dtsi instead. Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox