mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To: Sascha Hauer <s.hauer@pengutronix.de>
Cc: barebox@lists.infradead.org
Subject: Re: Porting barebox to Novena: misc questions
Date: Fri, 14 Mar 2014 04:13:51 +0100	[thread overview]
Message-ID: <20140314031351.GD6478@ns203013.ovh.net> (raw)
In-Reply-To: <20140313212623.GV17250@pengutronix.de>

On 22:26 Thu 13 Mar     , Sascha Hauer wrote:
> On Thu, Mar 13, 2014 at 09:43:07PM +0100, Eric Bénard wrote:
> > Hi,
> > 
> > Le Thu, 13 Mar 2014 10:04:35 +0800,
> > Sean Cross <xobs@kosagi.com> a écrit :
> > > I've finally managed to get U-Boot's SPL to configure DDR3 and load
> > > barebox off of a FAT partition on an i.MX6DL.  I also have a barebox
> > > build with most features turned on, and I'm running into a number of
> > > problems.  barebox is able to load a zImage off of the FAT partition,
> > > set up ATAGs, and jump to it.  So I have the basics done.  But there are
> > > lots of little things that aren't working.
> > > 
> > > When I boot without an Ethernet cable plugged in, the "timeout" command
> > > takes a very long time to complete.  It generally freezes at "Hit any
> > > key to stop autoboot:  3" and tends to ignore input for around ten
> > > seconds.  How can I prevent this from happening, short of compiling out
> > > FEC support?
> > > 
> > that's very similar to what I reported here :
> > http://lists.infradead.org/pipermail/barebox/2014-February/018005.html
> > 
> > I didn't yet had time to investigate more based on Sascha's answer but
> > that's on my todo list.
> 
> Ok, got it. The following fixes this. Looking at the netconsole it seems
> some love is needed. Right now it only seems to work when port and ip
> are set in the right order.

I'm going to give a try on it too later this week

Best Regards,
J.
> 
> Sascha
> 
> --------------8<----------------------------------
> 
> From e4616cba4ec41ebc0d9e0419fd094984209ddbd1 Mon Sep 17 00:00:00 2001
> From: Sascha Hauer <s.hauer@pengutronix.de>
> Date: Thu, 13 Mar 2014 22:09:47 +0100
> Subject: [PATCH] netconsole: bail out when no connection is opened
> 
> When no connection is opened we should not call into
> the networking stack. Otherwise it can happen that we
> delay further execution until the network stack detected
> a link (or timed out bringing the link up).
> 
> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> ---
>  net/netconsole.c | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/net/netconsole.c b/net/netconsole.c
> index 2ab19de..86a68e1 100644
> --- a/net/netconsole.c
> +++ b/net/netconsole.c
> @@ -81,6 +81,9 @@ static int nc_getc(struct console_device *cdev)
>  					struct nc_priv, cdev);
>  	unsigned char c;
>  
> +	if (!priv->con)
> +		return 0;
> +
>  	while (!kfifo_len(priv->fifo))
>  		net_poll();
>  
> @@ -94,6 +97,9 @@ static int nc_tstc(struct console_device *cdev)
>  	struct nc_priv *priv = container_of(cdev,
>  					struct nc_priv, cdev);
>  
> +	if (!priv->con)
> +		return 0;
> +
>  	if (priv->busy)
>  		return kfifo_len(priv->fifo) ? 1 : 0;
>  
> -- 
> Pengutronix e.K.                           |                             |
> Industrial Linux Solutions                 | http://www.pengutronix.de/  |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
> 
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

      reply	other threads:[~2014-03-14  3:12 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-03-13  2:04 Sean Cross
2014-03-13  7:38 ` Sascha Hauer
2014-03-13 10:18   ` Sean Cross
2014-03-13 20:27     ` Sascha Hauer
2014-03-14  3:35       ` Sean Cross
2014-03-14  8:22         ` Sascha Hauer
2014-03-17  4:28           ` Sean Cross
2014-03-17  7:18             ` Sascha Hauer
2014-03-17  7:31               ` Alexander Aring
2014-03-17  7:44               ` Sean Cross
2014-03-17 10:53                 ` Sascha Hauer
2014-03-18  3:35                   ` Sean Cross
2014-03-18  8:36                     ` Sascha Hauer
2014-03-18  8:43                       ` Sean Cross
2014-03-18  8:58                         ` Sascha Hauer
2014-03-18  9:04                           ` Sean Cross
2014-03-13 19:42   ` Jean-Christophe PLAGNIOL-VILLARD
2014-03-13 20:30     ` Sascha Hauer
2014-03-14  3:03       ` Jean-Christophe PLAGNIOL-VILLARD
2014-03-13 20:43 ` Eric Bénard
2014-03-13 21:26   ` Sascha Hauer
2014-03-14  3:13     ` Jean-Christophe PLAGNIOL-VILLARD [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140314031351.GD6478@ns203013.ovh.net \
    --to=plagnioj@jcrosoft.com \
    --cc=barebox@lists.infradead.org \
    --cc=s.hauer@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox