mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Alexander Aring <alex.aring@gmail.com>
To: Sascha Hauer <s.hauer@pengutronix.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH 1/2] Add initial regulator support
Date: Mon, 28 Apr 2014 18:41:54 +0200	[thread overview]
Message-ID: <20140428164153.GA5287@omega> (raw)
In-Reply-To: <20140428163015.GB19883@omega>

On Mon, Apr 28, 2014 at 06:30:15PM +0200, Alexander Aring wrote:
> Hi Sascha,
> 
> On Mon, Apr 28, 2014 at 10:18:40AM +0200, Sascha Hauer wrote:
> > Provide minimal regulator support. Only supported operations are enabling
> > and disabling regulators. Association of devices with their regulators is
> > limited to devicetree only. If regulator support is disabled the API expands
> > to static inline stubs so consumers can still use the API.
> > 
> > Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
> > ---
> >  commands/Kconfig           |   8 ++
> >  commands/Makefile          |   1 +
> >  commands/regulator.c       |  33 ++++++
> >  drivers/Kconfig            |   1 +
> >  drivers/Makefile           |   1 +
> >  drivers/regulator/Kconfig  |  13 +++
> >  drivers/regulator/Makefile |   2 +
> >  drivers/regulator/core.c   | 262 +++++++++++++++++++++++++++++++++++++++++++++
> >  drivers/regulator/fixed.c  | 103 ++++++++++++++++++
> >  include/regulator.h        |  47 ++++++++
> >  10 files changed, 471 insertions(+)
> >  create mode 100644 commands/regulator.c
> >  create mode 100644 drivers/regulator/Kconfig
> >  create mode 100644 drivers/regulator/Makefile
> >  create mode 100644 drivers/regulator/core.c
> >  create mode 100644 drivers/regulator/fixed.c
> >  create mode 100644 include/regulator.h
> > 
> > diff --git a/commands/Kconfig b/commands/Kconfig
> > index cc014f3..510cc91 100644
> > --- a/commands/Kconfig
> > +++ b/commands/Kconfig
> > @@ -690,6 +690,14 @@ config CMD_GPIO
> >  	  include gpio_set_value, gpio_get_value, gpio_direction_input and
> >  	  gpio_direction_output commands to control gpios.
> >  
> > +config CMD_REGULATOR
> > +	bool
> > +	depends on REGULATOR
> > +	prompt "regulator command"
> > +	help
> > +	  the regulator command lists the currently registered regulators and
> > +	  their current state.
> > +
> >  config CMD_UNCOMPRESS
> >  	bool
> >  	select UNCOMPRESS
> > diff --git a/commands/Makefile b/commands/Makefile
> > index e463031..7836515 100644
> > --- a/commands/Makefile
> > +++ b/commands/Makefile
> > @@ -95,3 +95,4 @@ obj-$(CONFIG_CMD_BOOT)		+= boot.o
> ...
> > +};
> > +
> > +static int regulator_fixed_enable(struct regulator_dev *rdev)
> > +{
> > +	struct regulator_fixed *fix = container_of(rdev, struct regulator_fixed, rdev);
> > +
> > +	if (!gpio_is_valid(fix->gpio))
> > +		return 0;
> > +
> This should return a errno like the above one "-EINVAL". Or?
> 
Sorry I meant s/above/below/ ...

> > +	return gpio_direction_output(fix->gpio, !fix->active_low);
> > +}
> > +
> > +static int regulator_fixed_disable(struct regulator_dev *rdev)
> > +{
> > +	struct regulator_fixed *fix = container_of(rdev, struct regulator_fixed, rdev);
> > +
> > +	if (!gpio_is_valid(fix->gpio))
> > +		return -EINVAL;
> > +
> 
> like this.
> 
> - Alex

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2014-04-28 16:42 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-04-28  8:18 [PATCH] " Sascha Hauer
2014-04-28  8:18 ` [PATCH 1/2] Add " Sascha Hauer
2014-04-28 16:30   ` Alexander Aring
2014-04-28 16:41     ` Alexander Aring [this message]
2014-04-28 18:47     ` Sascha Hauer
2014-04-28 18:51       ` Alexander Aring
2014-04-28 20:00         ` Sascha Hauer
2014-04-28 20:08           ` Alexander Aring
2014-04-28  8:18 ` [PATCH 2/2] mci: Add " Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140428164153.GA5287@omega \
    --to=alex.aring@gmail.com \
    --cc=barebox@lists.infradead.org \
    --cc=s.hauer@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox