From: Sascha Hauer <s.hauer@pengutronix.de>
To: Beniamino Galvani <b.galvani@gmail.com>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH] ARM: Rockchip: use upstream dtsi files
Date: Wed, 30 Apr 2014 15:35:35 +0200 [thread overview]
Message-ID: <20140430133535.GO5858@pengutronix.de> (raw)
In-Reply-To: <1398807714-23247-1-git-send-email-b.galvani@gmail.com>
Hi Beniamino,
Thanks for doing this. I'll merge this patch to master right after the
next release when the rockchip branch and the dts branch are merged.
Sascha
On Tue, Apr 29, 2014 at 11:41:54PM +0200, Beniamino Galvani wrote:
>
> Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
> ---
> arch/arm/dts/rk3188-clocks.dtsi | 289 ---------------------------------------
> arch/arm/dts/rk3188.dtsi | 248 +--------------------------------
> arch/arm/dts/rk3xxx.dtsi | 134 ------------------
> 3 files changed, 3 insertions(+), 668 deletions(-)
> delete mode 100644 arch/arm/dts/rk3188-clocks.dtsi
> delete mode 100644 arch/arm/dts/rk3xxx.dtsi
>
> diff --git a/arch/arm/dts/rk3188-clocks.dtsi b/arch/arm/dts/rk3188-clocks.dtsi
> deleted file mode 100644
> index b1b92dc..0000000
> --- a/arch/arm/dts/rk3188-clocks.dtsi
> +++ /dev/null
> @@ -1,289 +0,0 @@
> -/*
> - * Copyright (c) 2013 MundoReader S.L.
> - * Author: Heiko Stuebner <heiko@sntech.de>
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License as published by
> - * the Free Software Foundation; either version 2 of the License, or
> - * (at your option) any later version.
> - *
> - * This program is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> - * GNU General Public License for more details.
> - */
> -
> -/ {
> - clocks {
> - #address-cells = <1>;
> - #size-cells = <1>;
> - ranges;
> -
> - /*
> - * This is a dummy clock, to be used as placeholder on
> - * other mux clocks when a specific parent clock is not
> - * yet implemented. It should be dropped when the driver
> - * is complete.
> - */
> - dummy: dummy {
> - compatible = "fixed-clock";
> - clock-frequency = <0>;
> - #clock-cells = <0>;
> - };
> -
> - xin24m: xin24m {
> - compatible = "fixed-clock";
> - clock-frequency = <24000000>;
> - #clock-cells = <0>;
> - };
> -
> - dummy48m: dummy48m {
> - compatible = "fixed-clock";
> - clock-frequency = <48000000>;
> - #clock-cells = <0>;
> - };
> -
> - dummy150m: dummy150m {
> - compatible = "fixed-clock";
> - clock-frequency = <150000000>;
> - #clock-cells = <0>;
> - };
> -
> - clk_gates0: gate-clk@200000d0 {
> - compatible = "rockchip,rk2928-gate-clk";
> - reg = <0x200000d0 0x4>;
> - clocks = <&dummy150m>, <&dummy>,
> - <&dummy>, <&dummy>,
> - <&dummy>, <&dummy>,
> - <&dummy>, <&dummy>,
> - <&dummy>, <&dummy>,
> - <&dummy>, <&dummy>,
> - <&dummy>, <&dummy>,
> - <&dummy>, <&dummy>;
> -
> - clock-output-names =
> - "gate_core_periph", "gate_cpu_gpll",
> - "gate_ddrphy", "gate_aclk_cpu",
> - "gate_hclk_cpu", "gate_pclk_cpu",
> - "gate_atclk_cpu", "gate_aclk_core",
> - "reserved", "gate_i2s0",
> - "gate_i2s0_frac", "reserved",
> - "reserved", "gate_spdif",
> - "gate_spdif_frac", "gate_testclk";
> -
> - #clock-cells = <1>;
> - };
> -
> - clk_gates1: gate-clk@200000d4 {
> - compatible = "rockchip,rk2928-gate-clk";
> - reg = <0x200000d4 0x4>;
> - clocks = <&xin24m>, <&xin24m>,
> - <&xin24m>, <&dummy>,
> - <&dummy>, <&xin24m>,
> - <&xin24m>, <&dummy>,
> - <&xin24m>, <&dummy>,
> - <&xin24m>, <&dummy>,
> - <&xin24m>, <&dummy>,
> - <&xin24m>, <&dummy>;
> -
> - clock-output-names =
> - "gate_timer0", "gate_timer1",
> - "gate_timer3", "gate_jtag",
> - "gate_aclk_lcdc1_src", "gate_otgphy0",
> - "gate_otgphy1", "gate_ddr_gpll",
> - "gate_uart0", "gate_frac_uart0",
> - "gate_uart1", "gate_frac_uart1",
> - "gate_uart2", "gate_frac_uart2",
> - "gate_uart3", "gate_frac_uart3";
> -
> - #clock-cells = <1>;
> - };
> -
> - clk_gates2: gate-clk@200000d8 {
> - compatible = "rockchip,rk2928-gate-clk";
> - reg = <0x200000d8 0x4>;
> - clocks = <&clk_gates2 1>, <&dummy>,
> - <&dummy>, <&dummy>,
> - <&dummy>, <&dummy>,
> - <&clk_gates2 3>, <&dummy>,
> - <&dummy>, <&dummy>,
> - <&dummy>, <&dummy48m>,
> - <&dummy>, <&dummy48m>,
> - <&dummy>, <&dummy>;
> -
> - clock-output-names =
> - "gate_periph_src", "gate_aclk_periph",
> - "gate_hclk_periph", "gate_pclk_periph",
> - "gate_smc", "gate_mac",
> - "gate_hsadc", "gate_hsadc_frac",
> - "gate_saradc", "gate_spi0",
> - "gate_spi1", "gate_mmc0",
> - "gate_mac_lbtest", "gate_mmc1",
> - "gate_emmc", "reserved";
> -
> - #clock-cells = <1>;
> - };
> -
> - clk_gates3: gate-clk@200000dc {
> - compatible = "rockchip,rk2928-gate-clk";
> - reg = <0x200000dc 0x4>;
> - clocks = <&dummy>, <&dummy>,
> - <&dummy>, <&dummy>,
> - <&xin24m>, <&xin24m>,
> - <&dummy>, <&dummy>,
> - <&xin24m>, <&dummy>,
> - <&dummy>, <&dummy>,
> - <&dummy>, <&dummy>,
> - <&xin24m>, <&dummy>;
> -
> - clock-output-names =
> - "gate_aclk_lcdc0_src", "gate_dclk_lcdc0",
> - "gate_dclk_lcdc1", "gate_pclkin_cif0",
> - "gate_timer2", "gate_timer4",
> - "gate_hsicphy", "gate_cif0_out",
> - "gate_timer5", "gate_aclk_vepu",
> - "gate_hclk_vepu", "gate_aclk_vdpu",
> - "gate_hclk_vdpu", "reserved",
> - "gate_timer6", "gate_aclk_gpu_src";
> -
> - #clock-cells = <1>;
> - };
> -
> - clk_gates4: gate-clk@200000e0 {
> - compatible = "rockchip,rk2928-gate-clk";
> - reg = <0x200000e0 0x4>;
> - clocks = <&clk_gates2 2>, <&clk_gates2 3>,
> - <&clk_gates2 1>, <&clk_gates2 1>,
> - <&clk_gates2 1>, <&clk_gates2 2>,
> - <&clk_gates2 2>, <&clk_gates2 2>,
> - <&clk_gates0 4>, <&clk_gates0 4>,
> - <&clk_gates0 3>, <&dummy>,
> - <&clk_gates0 3>, <&dummy>,
> - <&dummy>, <&dummy>;
> -
> - clock-output-names =
> - "gate_hclk_peri_axi_matrix", "gate_pclk_peri_axi_matrix",
> - "gate_aclk_cpu_peri", "gate_aclk_peri_axi_matrix",
> - "gate_aclk_pei_niu", "gate_hclk_usb_peri",
> - "gate_hclk_peri_ahb_arbi", "gate_hclk_emem_peri",
> - "gate_hclk_cpubus", "gate_hclk_ahb2apb",
> - "gate_aclk_strc_sys", "reserved",
> - "gate_aclk_intmem", "reserved",
> - "gate_hclk_imem1", "gate_hclk_imem0";
> -
> - #clock-cells = <1>;
> - };
> -
> - clk_gates5: gate-clk@200000e4 {
> - compatible = "rockchip,rk2928-gate-clk";
> - reg = <0x200000e4 0x4>;
> - clocks = <&clk_gates0 3>, <&clk_gates2 1>,
> - <&clk_gates0 5>, <&clk_gates0 5>,
> - <&clk_gates0 5>, <&clk_gates0 5>,
> - <&clk_gates0 4>, <&clk_gates0 5>,
> - <&clk_gates2 1>, <&clk_gates2 2>,
> - <&clk_gates2 2>, <&clk_gates2 2>,
> - <&clk_gates2 2>, <&clk_gates4 5>;
> -
> - clock-output-names =
> - "gate_aclk_dmac1", "gate_aclk_dmac2",
> - "gate_pclk_efuse", "gate_pclk_tzpc",
> - "gate_pclk_grf", "gate_pclk_pmu",
> - "gate_hclk_rom", "gate_pclk_ddrupctl",
> - "gate_aclk_smc", "gate_hclk_nandc",
> - "gate_hclk_mmc0", "gate_hclk_mmc1",
> - "gate_hclk_emmc", "gate_hclk_otg0";
> -
> - #clock-cells = <1>;
> - };
> -
> - clk_gates6: gate-clk@200000e8 {
> - compatible = "rockchip,rk2928-gate-clk";
> - reg = <0x200000e8 0x4>;
> - clocks = <&clk_gates3 0>, <&clk_gates0 4>,
> - <&clk_gates0 4>, <&clk_gates1 4>,
> - <&clk_gates0 4>, <&clk_gates3 0>,
> - <&dummy>, <&dummy>,
> - <&clk_gates3 0>, <&clk_gates0 4>,
> - <&clk_gates0 4>, <&clk_gates1 4>,
> - <&clk_gates0 4>, <&clk_gates3 0>;
> -
> - clock-output-names =
> - "gate_aclk_lcdc0", "gate_hclk_lcdc0",
> - "gate_hclk_lcdc1", "gate_aclk_lcdc1",
> - "gate_hclk_cif0", "gate_aclk_cif0",
> - "reserved", "reserved",
> - "gate_aclk_ipp", "gate_hclk_ipp",
> - "gate_hclk_rga", "gate_aclk_rga",
> - "gate_hclk_vio_bus", "gate_aclk_vio0";
> -
> - #clock-cells = <1>;
> - };
> -
> - clk_gates7: gate-clk@200000ec {
> - compatible = "rockchip,rk2928-gate-clk";
> - reg = <0x200000ec 0x4>;
> - clocks = <&clk_gates2 2>, <&clk_gates0 4>,
> - <&clk_gates0 4>, <&dummy>,
> - <&dummy>, <&clk_gates2 2>,
> - <&clk_gates2 2>, <&clk_gates0 5>,
> - <&dummy>, <&clk_gates0 5>,
> - <&clk_gates0 5>, <&clk_gates2 3>,
> - <&clk_gates2 3>, <&clk_gates2 3>,
> - <&clk_gates2 3>, <&clk_gates2 3>;
> -
> - clock-output-names =
> - "gate_hclk_emac", "gate_hclk_spdif",
> - "gate_hclk_i2s0_2ch", "gate_hclk_otg1",
> - "gate_hclk_hsic", "gate_hclk_hsadc",
> - "gate_hclk_pidf", "gate_pclk_timer0",
> - "reserved", "gate_pclk_timer2",
> - "gate_pclk_pwm01", "gate_pclk_pwm23",
> - "gate_pclk_spi0", "gate_pclk_spi1",
> - "gate_pclk_saradc", "gate_pclk_wdt";
> -
> - #clock-cells = <1>;
> - };
> -
> - clk_gates8: gate-clk@200000f0 {
> - compatible = "rockchip,rk2928-gate-clk";
> - reg = <0x200000f0 0x4>;
> - clocks = <&clk_gates0 5>, <&clk_gates0 5>,
> - <&clk_gates2 3>, <&clk_gates2 3>,
> - <&clk_gates0 5>, <&clk_gates0 5>,
> - <&clk_gates2 3>, <&clk_gates2 3>,
> - <&clk_gates2 3>, <&clk_gates0 5>,
> - <&clk_gates0 5>, <&clk_gates0 5>,
> - <&clk_gates2 3>, <&dummy>;
> -
> - clock-output-names =
> - "gate_pclk_uart0", "gate_pclk_uart1",
> - "gate_pclk_uart2", "gate_pclk_uart3",
> - "gate_pclk_i2c0", "gate_pclk_i2c1",
> - "gate_pclk_i2c2", "gate_pclk_i2c3",
> - "gate_pclk_i2c4", "gate_pclk_gpio0",
> - "gate_pclk_gpio1", "gate_pclk_gpio2",
> - "gate_pclk_gpio3", "gate_aclk_gps";
> -
> - #clock-cells = <1>;
> - };
> -
> - clk_gates9: gate-clk@200000f4 {
> - compatible = "rockchip,rk2928-gate-clk";
> - reg = <0x200000f4 0x4>;
> - clocks = <&dummy>, <&dummy>,
> - <&dummy>, <&dummy>,
> - <&dummy>, <&dummy>,
> - <&dummy>, <&dummy>;
> -
> - clock-output-names =
> - "gate_clk_core_dbg", "gate_pclk_dbg",
> - "gate_clk_trace", "gate_atclk",
> - "gate_clk_l2c", "gate_aclk_vio1",
> - "gate_pclk_publ", "gate_aclk_gpu";
> -
> - #clock-cells = <1>;
> - };
> - };
> -
> -};
> diff --git a/arch/arm/dts/rk3188.dtsi b/arch/arm/dts/rk3188.dtsi
> index 838da95..e19ac09 100644
> --- a/arch/arm/dts/rk3188.dtsi
> +++ b/arch/arm/dts/rk3188.dtsi
> @@ -13,66 +13,12 @@
> * GNU General Public License for more details.
> */
>
> -#include <dt-bindings/gpio/gpio.h>
> -#include <dt-bindings/pinctrl/rockchip.h>
> -#include "rk3xxx.dtsi"
> -#include "rk3188-clocks.dtsi"
> +#include <arm/rk3xxx.dtsi>
> +#include <arm/rk3188-clocks.dtsi>
> +#include <arm/rk3188.dtsi>
>
> / {
> - compatible = "rockchip,rk3188";
> -
> - cpus {
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - cpu@0 {
> - device_type = "cpu";
> - compatible = "arm,cortex-a9";
> - next-level-cache = <&L2>;
> - reg = <0x0>;
> - };
> - cpu@1 {
> - device_type = "cpu";
> - compatible = "arm,cortex-a9";
> - next-level-cache = <&L2>;
> - reg = <0x1>;
> - };
> - cpu@2 {
> - device_type = "cpu";
> - compatible = "arm,cortex-a9";
> - next-level-cache = <&L2>;
> - reg = <0x2>;
> - };
> - cpu@3 {
> - device_type = "cpu";
> - compatible = "arm,cortex-a9";
> - next-level-cache = <&L2>;
> - reg = <0x3>;
> - };
> - };
> -
> soc {
> - global-timer@1013c200 {
> - interrupts = <GIC_PPI 11 0xf04>;
> - };
> -
> - local-timer@1013c600 {
> - interrupts = <GIC_PPI 13 0xf04>;
> - };
> -
> - sram: sram@10080000 {
> - compatible = "mmio-sram";
> - reg = <0x10080000 0x8000>;
> - #address-cells = <1>;
> - #size-cells = <1>;
> - ranges = <0 0x10080000 0x8000>;
> -
> - smp-sram@0 {
> - compatible = "rockchip,rk3066-smp-sram";
> - reg = <0x0 0x50>;
> - };
> - };
> -
> ethernet@10204000 {
> compatible = "snps,arc-emac";
> reg = <0x10204000 0x100>;
> @@ -91,79 +37,6 @@
> };
>
> pinctrl@20008000 {
> - compatible = "rockchip,rk3188-pinctrl";
> - reg = <0x20008000 0xa0>,
> - <0x20008164 0x1a0>;
> - reg-names = "base", "pull";
> - #address-cells = <1>;
> - #size-cells = <1>;
> - ranges;
> -
> - gpio0: gpio0@0x2000a000 {
> - compatible = "rockchip,rk3188-gpio-bank0";
> - reg = <0x2000a000 0x100>,
> - <0x20004064 0x8>;
> - interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clk_gates8 9>;
> -
> - gpio-controller;
> - #gpio-cells = <2>;
> -
> - interrupt-controller;
> - #interrupt-cells = <2>;
> - };
> -
> - gpio1: gpio1@0x2003c000 {
> - compatible = "rockchip,gpio-bank";
> - reg = <0x2003c000 0x100>;
> - interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clk_gates8 10>;
> -
> - gpio-controller;
> - #gpio-cells = <2>;
> -
> - interrupt-controller;
> - #interrupt-cells = <2>;
> - };
> -
> - gpio2: gpio2@2003e000 {
> - compatible = "rockchip,gpio-bank";
> - reg = <0x2003e000 0x100>;
> - interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clk_gates8 11>;
> -
> - gpio-controller;
> - #gpio-cells = <2>;
> -
> - interrupt-controller;
> - #interrupt-cells = <2>;
> - };
> -
> - gpio3: gpio3@20080000 {
> - compatible = "rockchip,gpio-bank";
> - reg = <0x20080000 0x100>;
> - interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clk_gates8 12>;
> -
> - gpio-controller;
> - #gpio-cells = <2>;
> -
> - interrupt-controller;
> - #interrupt-cells = <2>;
> - };
> -
> - pcfg_pull_up: pcfg_pull_up {
> - bias-pull-up;
> - };
> -
> - pcfg_pull_down: pcfg_pull_down {
> - bias-pull-down;
> - };
> -
> - pcfg_pull_none: pcfg_pull_none {
> - bias-disable;
> - };
> -
> emac0 {
> emac0_pins: emac0-pins {
> rockchip,pins = <RK_GPIO3 16 RK_FUNC_2 &pcfg_pull_up>,
> @@ -178,121 +51,6 @@
> <RK_GPIO3 25 RK_FUNC_2 &pcfg_pull_up>;
> };
> };
> -
> - uart0 {
> - uart0_xfer: uart0-xfer {
> - rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_none>,
> - <RK_GPIO1 1 RK_FUNC_1 &pcfg_pull_none>;
> - };
> -
> - uart0_cts: uart0-cts {
> - rockchip,pins = <RK_GPIO1 2 RK_FUNC_1 &pcfg_pull_none>;
> - };
> -
> - uart0_rts: uart0-rts {
> - rockchip,pins = <RK_GPIO1 3 RK_FUNC_1 &pcfg_pull_none>;
> - };
> - };
> -
> - uart1 {
> - uart1_xfer: uart1-xfer {
> - rockchip,pins = <RK_GPIO1 4 RK_FUNC_1 &pcfg_pull_none>,
> - <RK_GPIO1 5 RK_FUNC_1 &pcfg_pull_none>;
> - };
> -
> - uart1_cts: uart1-cts {
> - rockchip,pins = <RK_GPIO1 6 RK_FUNC_1 &pcfg_pull_none>;
> - };
> -
> - uart1_rts: uart1-rts {
> - rockchip,pins = <RK_GPIO1 7 RK_FUNC_1 &pcfg_pull_none>;
> - };
> - };
> -
> - uart2 {
> - uart2_xfer: uart2-xfer {
> - rockchip,pins = <RK_GPIO1 8 RK_FUNC_1 &pcfg_pull_none>,
> - <RK_GPIO1 9 RK_FUNC_1 &pcfg_pull_none>;
> - };
> - /* no rts / cts for uart2 */
> - };
> -
> - uart3 {
> - uart3_xfer: uart3-xfer {
> - rockchip,pins = <RK_GPIO1 10 RK_FUNC_1 &pcfg_pull_none>,
> - <RK_GPIO1 11 RK_FUNC_1 &pcfg_pull_none>;
> - };
> -
> - uart3_cts: uart3-cts {
> - rockchip,pins = <RK_GPIO1 12 RK_FUNC_1 &pcfg_pull_none>;
> - };
> -
> - uart3_rts: uart3-rts {
> - rockchip,pins = <RK_GPIO1 13 RK_FUNC_1 &pcfg_pull_none>;
> - };
> - };
> -
> - sd0 {
> - sd0_clk: sd0-clk {
> - rockchip,pins = <RK_GPIO3 2 RK_FUNC_1 &pcfg_pull_none>;
> - };
> -
> - sd0_cmd: sd0-cmd {
> - rockchip,pins = <RK_GPIO3 3 RK_FUNC_1 &pcfg_pull_none>;
> - };
> -
> - sd0_cd: sd0-cd {
> - rockchip,pins = <RK_GPIO3 8 RK_FUNC_1 &pcfg_pull_none>;
> - };
> -
> - sd0_wp: sd0-wp {
> - rockchip,pins = <RK_GPIO3 9 RK_FUNC_1 &pcfg_pull_none>;
> - };
> -
> - sd0_pwr: sd0-pwr {
> - rockchip,pins = <RK_GPIO3 1 RK_FUNC_1 &pcfg_pull_none>;
> - };
> -
> - sd0_bus1: sd0-bus-width1 {
> - rockchip,pins = <RK_GPIO3 4 RK_FUNC_1 &pcfg_pull_none>;
> - };
> -
> - sd0_bus4: sd0-bus-width4 {
> - rockchip,pins = <RK_GPIO3 4 RK_FUNC_1 &pcfg_pull_none>,
> - <RK_GPIO3 5 RK_FUNC_1 &pcfg_pull_none>,
> - <RK_GPIO3 6 RK_FUNC_1 &pcfg_pull_none>,
> - <RK_GPIO3 7 RK_FUNC_1 &pcfg_pull_none>;
> - };
> - };
> -
> - sd1 {
> - sd1_clk: sd1-clk {
> - rockchip,pins = <RK_GPIO3 21 RK_FUNC_1 &pcfg_pull_none>;
> - };
> -
> - sd1_cmd: sd1-cmd {
> - rockchip,pins = <RK_GPIO3 16 RK_FUNC_1 &pcfg_pull_none>;
> - };
> -
> - sd1_cd: sd1-cd {
> - rockchip,pins = <RK_GPIO3 22 RK_FUNC_1 &pcfg_pull_none>;
> - };
> -
> - sd1_wp: sd1-wp {
> - rockchip,pins = <RK_GPIO3 23 RK_FUNC_1 &pcfg_pull_none>;
> - };
> -
> - sd1_bus1: sd1-bus-width1 {
> - rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_none>;
> - };
> -
> - sd1_bus4: sd1-bus-width4 {
> - rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_none>,
> - <RK_GPIO3 18 RK_FUNC_1 &pcfg_pull_none>,
> - <RK_GPIO3 19 RK_FUNC_1 &pcfg_pull_none>,
> - <RK_GPIO3 20 RK_FUNC_1 &pcfg_pull_none>;
> - };
> - };
> };
> };
> };
> diff --git a/arch/arm/dts/rk3xxx.dtsi b/arch/arm/dts/rk3xxx.dtsi
> deleted file mode 100644
> index 26e5a96..0000000
> --- a/arch/arm/dts/rk3xxx.dtsi
> +++ /dev/null
> @@ -1,134 +0,0 @@
> -/*
> - * Copyright (c) 2013 MundoReader S.L.
> - * Author: Heiko Stuebner <heiko@sntech.de>
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License as published by
> - * the Free Software Foundation; either version 2 of the License, or
> - * (at your option) any later version.
> - *
> - * This program is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> - * GNU General Public License for more details.
> - */
> -
> -#include <dt-bindings/interrupt-controller/irq.h>
> -#include <dt-bindings/interrupt-controller/arm-gic.h>
> -#include "skeleton.dtsi"
> -
> -/ {
> - interrupt-parent = <&gic>;
> -
> - soc {
> - #address-cells = <1>;
> - #size-cells = <1>;
> - compatible = "simple-bus";
> - ranges;
> -
> - scu@1013c000 {
> - compatible = "arm,cortex-a9-scu";
> - reg = <0x1013c000 0x100>;
> - };
> -
> - pmu@20004000 {
> - compatible = "rockchip,rk3066-pmu";
> - reg = <0x20004000 0x100>;
> - };
> -
> - gic: interrupt-controller@1013d000 {
> - compatible = "arm,cortex-a9-gic";
> - interrupt-controller;
> - #interrupt-cells = <3>;
> - reg = <0x1013d000 0x1000>,
> - <0x1013c100 0x0100>;
> - };
> -
> - L2: l2-cache-controller@10138000 {
> - compatible = "arm,pl310-cache";
> - reg = <0x10138000 0x1000>;
> - cache-unified;
> - cache-level = <2>;
> - };
> -
> - global-timer@1013c200 {
> - compatible = "arm,cortex-a9-global-timer";
> - reg = <0x1013c200 0x20>;
> - interrupts = <GIC_PPI 11 0x304>;
> - clocks = <&dummy150m>;
> - };
> -
> - local-timer@1013c600 {
> - compatible = "arm,cortex-a9-twd-timer";
> - reg = <0x1013c600 0x20>;
> - interrupts = <GIC_PPI 13 0x304>;
> - clocks = <&dummy150m>;
> - };
> -
> - uart0: serial@10124000 {
> - compatible = "snps,dw-apb-uart";
> - reg = <0x10124000 0x400>;
> - interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
> - reg-shift = <2>;
> - reg-io-width = <1>;
> - clocks = <&clk_gates1 8>;
> - status = "disabled";
> - };
> -
> - uart1: serial@10126000 {
> - compatible = "snps,dw-apb-uart";
> - reg = <0x10126000 0x400>;
> - interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
> - reg-shift = <2>;
> - reg-io-width = <1>;
> - clocks = <&clk_gates1 10>;
> - status = "disabled";
> - };
> -
> - uart2: serial@20064000 {
> - compatible = "snps,dw-apb-uart";
> - reg = <0x20064000 0x400>;
> - interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
> - reg-shift = <2>;
> - reg-io-width = <1>;
> - clocks = <&clk_gates1 12>;
> - status = "disabled";
> - };
> -
> - uart3: serial@20068000 {
> - compatible = "snps,dw-apb-uart";
> - reg = <0x20068000 0x400>;
> - interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
> - reg-shift = <2>;
> - reg-io-width = <1>;
> - clocks = <&clk_gates1 14>;
> - status = "disabled";
> - };
> -
> - dwmmc@10214000 {
> - compatible = "rockchip,rk2928-dw-mshc";
> - reg = <0x10214000 0x1000>;
> - interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - clocks = <&clk_gates5 10>, <&clk_gates2 11>;
> - clock-names = "biu", "ciu";
> -
> - status = "disabled";
> - };
> -
> - dwmmc@10218000 {
> - compatible = "rockchip,rk2928-dw-mshc";
> - reg = <0x10218000 0x1000>;
> - interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
> - #address-cells = <1>;
> - #size-cells = <0>;
> -
> - clocks = <&clk_gates5 11>, <&clk_gates2 13>;
> - clock-names = "biu", "ciu";
> -
> - status = "disabled";
> - };
> - };
> -};
> --
> 1.7.10.4
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
prev parent reply other threads:[~2014-04-30 13:35 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-29 21:41 Beniamino Galvani
2014-04-30 13:35 ` Sascha Hauer [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140430133535.GO5858@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=b.galvani@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox