Re: [PATCH 0/5] ARM: initial support for RC Module UEMD SoCs and MB 77.07 board

[Antony Pavlov <antonynpavlov@gmail.com>]

On Fri, 9 May 2014 08:20:09 +0200
Sascha Hauer <s.hauer@pengutronix.de> wrote:

> Antony,
> 
> This series is still in my inbox with only one small issue. Will you
> update the series?

I'll resend the series next week. I'll try to add usb support this weekend.

I have some other almost ready series in my queue:

* digic series (digic support is in qemu-2.0 now);
* switch dir-320 to device tree;
* mips cache + ELF-kexec;
* pci.

> 
> On Wed, Apr 16, 2014 at 01:57:35PM +0400, Antony Pavlov wrote:
> > Research Centre "Module" (RC Module) is
> > a Russian development company designing
> > mixed-signal ASICs and real-time video-image
> > processing systems.
> > 
> > К1879ХБ1Я (AKA K1879HB1YA) is a UEMD family SoC that combines
> > a DSP core based on the NeuroMatrix(r) family
> > with an ARM architecture CPU ARM1176JZF-S core.
> > 
> > The MB 77.07 is a small (80x80 mm) single-board computer
> > developed in Russia by the RC Module.
> > It was developed as an educational board for К1879ХБ1Я SoC
> > capabilities demonstration.
> > 
> > See http://www.module.ru/en/catalog/micro/micro_pc/ for details.
> > 
> > MB 77.07 barebox HOWTO
> > ======================
> > 
> > 0. Download barebox sources and build barebox.bin image
> > 
> >     $ git clone -b next.mb7707.20140416 https://github.com/frantony/barebox barebox.mb7707
> >     $ cd barebox.mb7707
> >     $ export ARCH=arm
> >     $ export CROSS_COMPILE=<your_ARM_toolchain_prefix>
> >          e.g. export CROSS_COMPILE=/opt/arm-2013.11/bin/arm-none-linux-gnueabi-
> >     $ make module-mb7707_defconfig
> >     $ make
> > 
> > You will get the 'barebox.bin' file.
> > 
> > 
> > 1. burn MBOOT bootloader to the board's ROM;
> > 
> > 
> > 2. Barebox can be started from MBOOT using tftp.
> > You have to setup tftp-server on host 192.168.0.1.
> > Put your barebox.bin to tftp-server directory
> > (usual /tftpboot or /srv/tftp).
> > 
> > Connect your MB 77.07 board to your tftp-server network via
> > Ethernet RJ45 connector on the board.
> > 
> > Connect to К1879ХБ1Я's UART (use "SERIAL" connector on the booard)
> > using your favorite terminal program.
> > 
> > 
> > 3. turn on the board, press any key in you terminal program
> > to stop autoboot and load barebox.bin image to the board's RAM:
> > 
> >     MBOOT # set bootfile barebox.bin
> >     MBOOT # tftpboot
> >     greth: greth_halt
> >     TFTP Using GRETH_10/100 device
> >     TFTP params: server 192.168.0.1 our_ip 192.168.0.7
> >     TFTP params: filename 'barebox.bin' load_address 0x40100000
> >     TFTP Loading: ##########################
> >     TFTP done
> >     greth: greth_halt
> >     MBOOT #
> > 
> > 
> > 4. run barebox
> > 
> >     MBOOT # go 0x40100000
> > 
> > 
> > Antony Pavlov (5):
> >   ARM: initial support for RC Module UEMD SoCs
> >   ARM: uemd: add DEBUG_LL support
> >   ARM: dts: add minimal К1879ХБ1Я devicetree file
> >   ARM: uemd: add mb7707 board support
> >   ARM: uemd: add module-mb7707_defconfig
> > 
> >  arch/arm/Kconfig                           |  6 +++++
> >  arch/arm/Makefile                          |  1 +
> >  arch/arm/boards/Makefile                   |  1 +
> >  arch/arm/boards/module-mb7707/Makefile     |  1 +
> >  arch/arm/boards/module-mb7707/board.c      | 27 +++++++++++++++++++
> >  arch/arm/boards/module-mb7707/lowlevel.c   | 34 +++++++++++++++++++++++
> >  arch/arm/configs/module-mb7707_defconfig   | 43 ++++++++++++++++++++++++++++++
> >  arch/arm/dts/k1879hb1ya.dtsi               | 19 +++++++++++++
> >  arch/arm/dts/module-mb7707.dts             | 16 +++++++++++
> >  arch/arm/mach-uemd/Kconfig                 | 16 +++++++++++
> >  arch/arm/mach-uemd/Makefile                |  1 +
> >  arch/arm/mach-uemd/include/mach/debug_ll.h | 41 ++++++++++++++++++++++++++++
> >  arch/arm/mach-uemd/reset.c                 | 24 +++++++++++++++++
> >  13 files changed, 230 insertions(+)
> >  create mode 100644 arch/arm/boards/module-mb7707/Makefile
> >  create mode 100644 arch/arm/boards/module-mb7707/board.c
> >  create mode 100644 arch/arm/boards/module-mb7707/lowlevel.c
> >  create mode 100644 arch/arm/configs/module-mb7707_defconfig
> >  create mode 100644 arch/arm/dts/k1879hb1ya.dtsi
> >  create mode 100644 arch/arm/dts/module-mb7707.dts
> >  create mode 100644 arch/arm/mach-uemd/Kconfig
> >  create mode 100644 arch/arm/mach-uemd/Makefile
> >  create mode 100644 arch/arm/mach-uemd/include/mach/debug_ll.h
> >  create mode 100644 arch/arm/mach-uemd/reset.c
> > 
> > -- 
> > 1.9.0
> > 
> > 
> > _______________________________________________
> > barebox mailing list
> > barebox@lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/barebox
> 
> -- 
> Pengutronix e.K.                           |                             |
> Industrial Linux Solutions                 | http://www.pengutronix.de/  |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |


-- 
-- 
Best regards,
  Antony Pavlov

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox