mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: Lucas Stach <dev@lynxeye.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH 10/25] i2c: add Tegra driver
Date: Mon, 12 May 2014 13:49:36 +0200	[thread overview]
Message-ID: <20140512114936.GG5858@pengutronix.de> (raw)
In-Reply-To: <1399878486-16086-11-git-send-email-dev@lynxeye.de>

On Mon, May 12, 2014 at 09:07:51AM +0200, Lucas Stach wrote:
> Signed-off-by: Lucas Stach <dev@lynxeye.de>
> ---
>  drivers/i2c/busses/Kconfig     |   4 +
>  drivers/i2c/busses/Makefile    |   1 +
>  drivers/i2c/busses/i2c-tegra.c | 708 +++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 713 insertions(+)
>  create mode 100644 drivers/i2c/busses/i2c-tegra.c
> 
> diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
> index 68d9b46..370abb0 100644
> --- a/drivers/i2c/busses/Kconfig
> +++ b/drivers/i2c/busses/Kconfig
> @@ -20,6 +20,10 @@ config I2C_OMAP
>  	bool "OMAP I2C Master driver"
>  	depends on ARCH_OMAP
>  
> +config I2C_TEGRA
> +	bool "Tegra I2C master driver"
> +	depends on ARCH_TEGRA
> +
>  config I2C_VERSATILE
>  	tristate "ARM Versatile/Realview I2C bus support"
>  	depends on ARCH_VERSATILE
> diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
> index a30f9b8..9823d1b 100644
> --- a/drivers/i2c/busses/Makefile
> +++ b/drivers/i2c/busses/Makefile
> @@ -1,4 +1,5 @@
>  obj-$(CONFIG_I2C_GPIO)		+= i2c-gpio.o
>  obj-$(CONFIG_I2C_IMX) += i2c-imx.o
>  obj-$(CONFIG_I2C_OMAP) += i2c-omap.o
> +obj-$(CONFIG_I2C_TEGRA)		+= i2c-tegra.o
>  obj-$(CONFIG_I2C_VERSATILE)	+= i2c-versatile.o
> diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
> new file mode 100644
> index 0000000..1f27a97
> --- /dev/null
> +++ b/drivers/i2c/busses/i2c-tegra.c
> @@ -0,0 +1,708 @@
> +/*
> + * Copyright (C) 2014 Lucas Stach <l.stach@pengutronix.de>
> + *
> + * Partly based on code Copyright (C) 2010 Google, Inc.
> + *
> + * This software is licensed under the terms of the GNU General Public
> + * License version 2, as published by the Free Software Foundation, and
> + * may be copied, distributed, and modified under those terms.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + */
> +#include <common.h>
> +#include <clock.h>
> +#include <init.h>
> +#include <io.h>
> +#include <malloc.h>
> +#include <i2c/i2c.h>
> +#include <linux/kernel.h>
> +#include <linux/clk.h>
> +#include <linux/err.h>
> +#include <linux/reset.h>
> +
> +#include <asm/unaligned.h>
> +
> +#define TEGRA_I2C_TIMEOUT (msecs_to_jiffies(1000))
> +#define BYTES_PER_FIFO_WORD 4
> +
> +#define I2C_CNFG				0x000
> +#define I2C_CNFG_DEBOUNCE_CNT_SHIFT		12
> +#define I2C_CNFG_PACKET_MODE_EN			(1<<10)
> +#define I2C_CNFG_NEW_MASTER_FSM			(1<<11)
> +#define I2C_STATUS				0x01C
> +#define I2C_SL_CNFG				0x020
> +#define I2C_SL_CNFG_NACK			(1<<1)
> +#define I2C_SL_CNFG_NEWSL			(1<<2)
> +#define I2C_SL_ADDR1				0x02c
> +#define I2C_SL_ADDR2				0x030
> +#define I2C_TX_FIFO				0x050
> +#define I2C_RX_FIFO				0x054
> +#define I2C_PACKET_TRANSFER_STATUS		0x058
> +#define I2C_FIFO_CONTROL			0x05c
> +#define I2C_FIFO_CONTROL_TX_FLUSH		(1<<1)
> +#define I2C_FIFO_CONTROL_RX_FLUSH		(1<<0)
> +#define I2C_FIFO_CONTROL_TX_TRIG_SHIFT		5
> +#define I2C_FIFO_CONTROL_RX_TRIG_SHIFT		2
> +#define I2C_FIFO_STATUS				0x060
> +#define I2C_FIFO_STATUS_TX_MASK			0xF0
> +#define I2C_FIFO_STATUS_TX_SHIFT		4
> +#define I2C_FIFO_STATUS_RX_MASK			0x0F
> +#define I2C_FIFO_STATUS_RX_SHIFT		0
> +#define I2C_INT_MASK				0x064
> +#define I2C_INT_STATUS				0x068
> +#define I2C_INT_PACKET_XFER_COMPLETE		(1<<7)
> +#define I2C_INT_ALL_PACKETS_XFER_COMPLETE	(1<<6)
> +#define I2C_INT_TX_FIFO_OVERFLOW		(1<<5)
> +#define I2C_INT_RX_FIFO_UNDERFLOW		(1<<4)
> +#define I2C_INT_NO_ACK				(1<<3)
> +#define I2C_INT_ARBITRATION_LOST		(1<<2)
> +#define I2C_INT_TX_FIFO_DATA_REQ		(1<<1)
> +#define I2C_INT_RX_FIFO_DATA_REQ		(1<<0)
> +#define I2C_CLK_DIVISOR				0x06c
> +#define I2C_CLK_DIVISOR_STD_FAST_MODE_SHIFT	16
> +#define I2C_CLK_MULTIPLIER_STD_FAST_MODE	8
> +
> +#define DVC_CTRL_REG1				0x000
> +#define DVC_CTRL_REG1_INTR_EN			(1<<10)
> +#define DVC_CTRL_REG2				0x004
> +#define DVC_CTRL_REG3				0x008
> +#define DVC_CTRL_REG3_SW_PROG			(1<<26)
> +#define DVC_CTRL_REG3_I2C_DONE_INTR_EN		(1<<30)
> +#define DVC_STATUS				0x00c
> +#define DVC_STATUS_I2C_DONE_INTR		(1<<30)
> +
> +#define I2C_ERR_NONE				0x00
> +#define I2C_ERR_NO_ACK				0x01
> +#define I2C_ERR_ARBITRATION_LOST		0x02
> +#define I2C_ERR_UNKNOWN_INTERRUPT		0x04
> +
> +#define PACKET_HEADER0_HEADER_SIZE_SHIFT	28
> +#define PACKET_HEADER0_PACKET_ID_SHIFT		16
> +#define PACKET_HEADER0_CONT_ID_SHIFT		12
> +#define PACKET_HEADER0_PROTOCOL_I2C		(1<<4)
> +
> +#define I2C_HEADER_HIGHSPEED_MODE		(1<<22)
> +#define I2C_HEADER_CONT_ON_NAK			(1<<21)
> +#define I2C_HEADER_SEND_START_BYTE		(1<<20)
> +#define I2C_HEADER_READ				(1<<19)
> +#define I2C_HEADER_10BIT_ADDR			(1<<18)
> +#define I2C_HEADER_IE_ENABLE			(1<<17)
> +#define I2C_HEADER_REPEAT_START			(1<<16)
> +#define I2C_HEADER_CONTINUE_XFER		(1<<15)
> +#define I2C_HEADER_MASTER_ADDR_SHIFT		12
> +#define I2C_HEADER_SLAVE_ADDR_SHIFT		1
> +/*
> + * msg_end_type: The bus control which need to be send at end of transfer.
> + * @MSG_END_STOP: Send stop pulse at end of transfer.
> + * @MSG_END_REPEAT_START: Send repeat start at end of transfer.
> + * @MSG_END_CONTINUE: The following on message is coming and so do not send
> + *		stop or repeat start.
> + */
> +enum msg_end_type {
> +	MSG_END_STOP,
> +	MSG_END_REPEAT_START,
> +	MSG_END_CONTINUE,
> +};
> +
> +/**
> + * struct tegra_i2c_hw_feature : Different HW support on Tegra
> + * @has_continue_xfer_support: Continue transfer supports.
> + * @has_per_pkt_xfer_complete_irq: Has enable/disable capability for transfer
> + *		complete interrupt per packet basis.
> + * @has_single_clk_source: The i2c controller has single clock source. Tegra30
> + *		and earlier Socs has two clock sources i.e. div-clk and
> + *		fast-clk.
> + * @clk_divisor_hs_mode: Clock divisor in HS mode.
> + * @clk_divisor_std_fast_mode: Clock divisor in standard/fast mode. It is
> + *		applicable if there is no fast clock source i.e. single clock
> + *		source.
> + */
> +
> +struct tegra_i2c_hw_feature {
> +	bool has_continue_xfer_support;
> +	bool has_per_pkt_xfer_complete_irq;
> +	bool has_single_clk_source;
> +	int clk_divisor_hs_mode;
> +	int clk_divisor_std_fast_mode;
> +};
> +
> +/**
> + * struct tegra_i2c_dev	- per device i2c context
> + * @dev: device reference for power management
> + * @hw: Tegra i2c hw feature.
> + * @adapter: core i2c layer adapter information
> + * @div_clk: clock reference for div clock of i2c controller.
> + * @fast_clk: clock reference for fast clock of i2c controller.
> + * @base: ioremapped registers cookie
> + * @is_dvc: identifies the DVC i2c controller, has a different register layout
> + * @msg_err: error code for completed message
> + * @msg_buf: pointer to current message data
> + * @msg_buf_remaining: size of unsent data in the message buffer
> + * @msg_read: identifies read transfers
> + * @bus_clk_rate: current i2c bus clock rate
> + */
> +struct tegra_i2c_dev {
> +	struct device_d *dev;
> +	const struct tegra_i2c_hw_feature *hw;
> +	struct i2c_adapter adapter;
> +	struct clk *div_clk;
> +	struct clk *fast_clk;
> +	struct reset_control *rst;
> +	void __iomem *base;
> +	int is_dvc;
> +	int msg_err;
> +	u8 *msg_buf;
> +	size_t msg_buf_remaining;
> +	int msg_read;
> +	u32 bus_clk_rate;
> +};
> +#define to_tegra_i2c_dev(a)	container_of(a, struct tegra_i2c_dev, adapter)
> +
> +static void dvc_writel(struct tegra_i2c_dev *i2c_dev, u32 val, unsigned long reg)
> +{
> +	writel(val, i2c_dev->base + reg);
> +}
> +
> +static u32 dvc_readl(struct tegra_i2c_dev *i2c_dev, unsigned long reg)
> +{
> +	return readl(i2c_dev->base + reg);
> +}
> +
> +/*
> + * i2c_writel and i2c_readl will offset the register if necessary to talk
> + * to the I2C block inside the DVC block
> + */
> +static unsigned long tegra_i2c_reg_addr(struct tegra_i2c_dev *i2c_dev,
> +	unsigned long reg)
> +{
> +	if (i2c_dev->is_dvc)
> +		reg += (reg >= I2C_TX_FIFO) ? 0x10 : 0x40;
> +	return reg;
> +}
> +
> +static void i2c_writel(struct tegra_i2c_dev *i2c_dev, u32 val,
> +	unsigned long reg)
> +{
> +	writel(val, i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, reg));
> +
> +	/* Read back register to make sure that register writes completed */
> +	if (reg != I2C_TX_FIFO)
> +		readl(i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, reg));
> +}
> +
> +static u32 i2c_readl(struct tegra_i2c_dev *i2c_dev, unsigned long reg)
> +{
> +	return readl(i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, reg));
> +}
> +
> +static void i2c_writesl(struct tegra_i2c_dev *i2c_dev, void *data,
> +	unsigned long reg, int len)
> +{
> +	writesl(i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, reg), data, len);
> +}
> +
> +static void i2c_readsl(struct tegra_i2c_dev *i2c_dev, void *data,
> +	unsigned long reg, int len)
> +{
> +	readsl(i2c_dev->base + tegra_i2c_reg_addr(i2c_dev, reg), data, len);
> +}
> +
> +static int tegra_i2c_flush_fifos(struct tegra_i2c_dev *i2c_dev)
> +{
> +	uint64_t start = get_time_ns();
> +	u32 val = i2c_readl(i2c_dev, I2C_FIFO_CONTROL);
> +	val |= I2C_FIFO_CONTROL_TX_FLUSH | I2C_FIFO_CONTROL_RX_FLUSH;
> +	i2c_writel(i2c_dev, val, I2C_FIFO_CONTROL);
> +
> +	while (i2c_readl(i2c_dev, I2C_FIFO_CONTROL) &
> +		(I2C_FIFO_CONTROL_TX_FLUSH | I2C_FIFO_CONTROL_RX_FLUSH)) {
> +		if (is_timeout(start, SECOND)) {
> +			dev_warn(i2c_dev->dev, "timeout waiting for fifo flush\n");
> +			return -ETIMEDOUT;
> +		}
> +		mdelay(1);
> +	}
> +	return 0;
> +}
> +
> +static int tegra_i2c_empty_rx_fifo(struct tegra_i2c_dev *i2c_dev)
> +{
> +	u32 val;
> +	int rx_fifo_avail;
> +	u8 *buf = i2c_dev->msg_buf;
> +	size_t buf_remaining = i2c_dev->msg_buf_remaining;
> +	int words_to_transfer;
> +
> +	val = i2c_readl(i2c_dev, I2C_FIFO_STATUS);
> +	rx_fifo_avail = (val & I2C_FIFO_STATUS_RX_MASK) >>
> +		I2C_FIFO_STATUS_RX_SHIFT;
> +
> +	/* Rounds down to not include partial word at the end of buf */
> +	words_to_transfer = buf_remaining / BYTES_PER_FIFO_WORD;
> +	if (words_to_transfer > rx_fifo_avail)
> +		words_to_transfer = rx_fifo_avail;
> +
> +	i2c_readsl(i2c_dev, buf, I2C_RX_FIFO, words_to_transfer);
> +
> +	buf += words_to_transfer * BYTES_PER_FIFO_WORD;
> +	buf_remaining -= words_to_transfer * BYTES_PER_FIFO_WORD;
> +	rx_fifo_avail -= words_to_transfer;
> +
> +	/*
> +	 * If there is a partial word at the end of buf, handle it manually to
> +	 * prevent overwriting past the end of buf
> +	 */
> +	if (rx_fifo_avail > 0 && buf_remaining > 0) {
> +		BUG_ON(buf_remaining > 3);
> +		val = i2c_readl(i2c_dev, I2C_RX_FIFO);
> +		memcpy(buf, &val, buf_remaining);
> +		buf_remaining = 0;
> +		rx_fifo_avail--;
> +	}
> +
> +	BUG_ON(rx_fifo_avail > 0 && buf_remaining > 0);
> +	i2c_dev->msg_buf_remaining = buf_remaining;
> +	i2c_dev->msg_buf = buf;
> +	return 0;
> +}
> +
> +static int tegra_i2c_fill_tx_fifo(struct tegra_i2c_dev *i2c_dev)
> +{
> +	u32 val;
> +	int tx_fifo_avail;
> +	u8 *buf = i2c_dev->msg_buf;
> +	size_t buf_remaining = i2c_dev->msg_buf_remaining;
> +	int words_to_transfer;
> +
> +	val = i2c_readl(i2c_dev, I2C_FIFO_STATUS);
> +	tx_fifo_avail = (val & I2C_FIFO_STATUS_TX_MASK) >>
> +		I2C_FIFO_STATUS_TX_SHIFT;
> +
> +	/* Rounds down to not include partial word at the end of buf */
> +	words_to_transfer = buf_remaining / BYTES_PER_FIFO_WORD;
> +
> +	/* It's very common to have < 4 bytes, so optimize that case. */
> +	if (words_to_transfer) {
> +		if (words_to_transfer > tx_fifo_avail)
> +			words_to_transfer = tx_fifo_avail;
> +
> +		/*
> +		 * Update state before writing to FIFO.  If this casues us
> +		 * to finish writing all bytes (AKA buf_remaining goes to 0) we
> +		 * have a potential for an interrupt (PACKET_XFER_COMPLETE is
> +		 * not maskable).  We need to make sure that the isr sees
> +		 * buf_remaining as 0 and doesn't call us back re-entrantly.
> +		 */
> +		buf_remaining -= words_to_transfer * BYTES_PER_FIFO_WORD;
> +		tx_fifo_avail -= words_to_transfer;
> +		i2c_dev->msg_buf_remaining = buf_remaining;
> +		i2c_dev->msg_buf = buf +
> +			words_to_transfer * BYTES_PER_FIFO_WORD;
> +		barrier();
> +
> +		i2c_writesl(i2c_dev, buf, I2C_TX_FIFO, words_to_transfer);
> +
> +		buf += words_to_transfer * BYTES_PER_FIFO_WORD;
> +	}
> +
> +	/*
> +	 * If there is a partial word at the end of buf, handle it manually to
> +	 * prevent reading past the end of buf, which could cross a page
> +	 * boundary and fault.
> +	 */
> +	if (tx_fifo_avail > 0 && buf_remaining > 0) {
> +		BUG_ON(buf_remaining > 3);
> +		memcpy(&val, buf, buf_remaining);
> +
> +		/* Again update before writing to FIFO to make sure isr sees. */
> +		i2c_dev->msg_buf_remaining = 0;
> +		i2c_dev->msg_buf = NULL;
> +		barrier();
> +
> +		i2c_writel(i2c_dev, val, I2C_TX_FIFO);
> +	}
> +
> +	return 0;
> +}
> +
> +/*
> + * One of the Tegra I2C blocks is inside the DVC (Digital Voltage Controller)
> + * block.  This block is identical to the rest of the I2C blocks, except that
> + * it only supports master mode, it has registers moved around, and it needs
> + * some extra init to get it into I2C mode.  The register moves are handled
> + * by i2c_readl and i2c_writel
> + */
> +static void tegra_dvc_init(struct tegra_i2c_dev *i2c_dev)
> +{
> +	u32 val = 0;
> +	val = dvc_readl(i2c_dev, DVC_CTRL_REG3);
> +	val |= DVC_CTRL_REG3_SW_PROG;
> +	val |= DVC_CTRL_REG3_I2C_DONE_INTR_EN;
> +	dvc_writel(i2c_dev, val, DVC_CTRL_REG3);
> +
> +	val = dvc_readl(i2c_dev, DVC_CTRL_REG1);
> +	val |= DVC_CTRL_REG1_INTR_EN;
> +	dvc_writel(i2c_dev, val, DVC_CTRL_REG1);
> +}
> +
> +static inline int tegra_i2c_clock_enable(struct tegra_i2c_dev *i2c_dev)
> +{
> +	int ret;
> +	if (!i2c_dev->hw->has_single_clk_source) {
> +		ret = clk_enable(i2c_dev->fast_clk);
> +		if (ret < 0) {
> +			dev_err(i2c_dev->dev,
> +				"Enabling fast clk failed, err %d\n", ret);
> +			return ret;
> +		}
> +	}
> +	ret = clk_enable(i2c_dev->div_clk);
> +	if (ret < 0) {
> +		dev_err(i2c_dev->dev,
> +			"Enabling div clk failed, err %d\n", ret);
> +		clk_disable(i2c_dev->fast_clk);
> +	}
> +	return ret;
> +}
> +
> +static inline void tegra_i2c_clock_disable(struct tegra_i2c_dev *i2c_dev)
> +{
> +	clk_disable(i2c_dev->div_clk);
> +	if (!i2c_dev->hw->has_single_clk_source)
> +		clk_disable(i2c_dev->fast_clk);
> +}
> +
> +static int tegra_i2c_init(struct tegra_i2c_dev *i2c_dev)
> +{
> +	u32 val;
> +	int err = 0;
> +	int clk_multiplier = I2C_CLK_MULTIPLIER_STD_FAST_MODE;
> +	u32 clk_divisor;
> +
> +	err = tegra_i2c_clock_enable(i2c_dev);
> +	if (err < 0) {
> +		dev_err(i2c_dev->dev, "Clock enable failed %d\n", err);
> +		return err;
> +	}
> +
> +	reset_control_assert(i2c_dev->rst);
> +	udelay(2);
> +	reset_control_deassert(i2c_dev->rst);
> +
> +	if (i2c_dev->is_dvc)
> +		tegra_dvc_init(i2c_dev);
> +
> +	val = I2C_CNFG_NEW_MASTER_FSM | I2C_CNFG_PACKET_MODE_EN |
> +		(0x2 << I2C_CNFG_DEBOUNCE_CNT_SHIFT);
> +	i2c_writel(i2c_dev, val, I2C_CNFG);
> +	i2c_writel(i2c_dev, 0, I2C_INT_MASK);
> +
> +	clk_multiplier *= (i2c_dev->hw->clk_divisor_std_fast_mode + 1);
> +	clk_set_rate(i2c_dev->div_clk, i2c_dev->bus_clk_rate * clk_multiplier);
> +
> +	/* Make sure clock divisor programmed correctly */
> +	clk_divisor = i2c_dev->hw->clk_divisor_hs_mode;
> +	clk_divisor |= i2c_dev->hw->clk_divisor_std_fast_mode <<
> +					I2C_CLK_DIVISOR_STD_FAST_MODE_SHIFT;
> +	i2c_writel(i2c_dev, clk_divisor, I2C_CLK_DIVISOR);
> +
> +	if (!i2c_dev->is_dvc) {
> +		u32 sl_cfg = i2c_readl(i2c_dev, I2C_SL_CNFG);
> +		sl_cfg |= I2C_SL_CNFG_NACK | I2C_SL_CNFG_NEWSL;
> +		i2c_writel(i2c_dev, sl_cfg, I2C_SL_CNFG);
> +		i2c_writel(i2c_dev, 0xfc, I2C_SL_ADDR1);
> +		i2c_writel(i2c_dev, 0x00, I2C_SL_ADDR2);
> +	}
> +
> +	val = 7 << I2C_FIFO_CONTROL_TX_TRIG_SHIFT |
> +		0 << I2C_FIFO_CONTROL_RX_TRIG_SHIFT;
> +	i2c_writel(i2c_dev, val, I2C_FIFO_CONTROL);
> +
> +	if (tegra_i2c_flush_fifos(i2c_dev))
> +		err = -ETIMEDOUT;
> +
> +	tegra_i2c_clock_disable(i2c_dev);
> +
> +	return err;
> +}
> +
> +static int tegra_i2c_wait_completion(struct tegra_i2c_dev *i2c_dev)
> +{
> +	u32 status;
> +	const u32 status_err = I2C_INT_NO_ACK | I2C_INT_ARBITRATION_LOST;
> +	uint64_t start = get_time_ns();
> +
> +	while (!is_timeout(start, SECOND)) {
> +
> +		status = i2c_readl(i2c_dev, I2C_INT_STATUS);
> +
> +		if (unlikely(status & status_err)) {
> +			if (status & I2C_INT_NO_ACK)
> +				i2c_dev->msg_err |= I2C_ERR_NO_ACK;
> +			if (status & I2C_INT_ARBITRATION_LOST)
> +				i2c_dev->msg_err |= I2C_ERR_ARBITRATION_LOST;
> +			goto err;
> +		}
> +
> +		if (i2c_dev->msg_read && (status & I2C_INT_RX_FIFO_DATA_REQ)) {
> +			if (i2c_dev->msg_buf_remaining)
> +				tegra_i2c_empty_rx_fifo(i2c_dev);
> +			else
> +				BUG();
> +		}
> +
> +		if (!i2c_dev->msg_read && (status & I2C_INT_TX_FIFO_DATA_REQ)) {
> +			if (i2c_dev->msg_buf_remaining)
> +				tegra_i2c_fill_tx_fifo(i2c_dev);
> +		}
> +
> +		i2c_writel(i2c_dev, status, I2C_INT_STATUS);
> +		if (i2c_dev->is_dvc)
> +			dvc_writel(i2c_dev, DVC_STATUS_I2C_DONE_INTR,
> +			           DVC_STATUS);
> +
> +		if (status & I2C_INT_PACKET_XFER_COMPLETE) {
> +			BUG_ON(i2c_dev->msg_buf_remaining);
> +			return 0;
> +		}
> +	}
> +	return -ETIMEDOUT;
> +
> +err:
> +	i2c_writel(i2c_dev, status, I2C_INT_STATUS);
> +	if (i2c_dev->is_dvc)
> +		dvc_writel(i2c_dev, DVC_STATUS_I2C_DONE_INTR, DVC_STATUS);
> +
> +	return 0;
> +}
> +
> +static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
> +	struct i2c_msg *msg, enum msg_end_type end_state)
> +{
> +	u32 packet_header;
> +	int ret;
> +
> +	tegra_i2c_flush_fifos(i2c_dev);
> +
> +	if (msg->len == 0)
> +		return -EINVAL;
> +
> +	i2c_dev->msg_buf = msg->buf;
> +	i2c_dev->msg_buf_remaining = msg->len;
> +	i2c_dev->msg_err = I2C_ERR_NONE;
> +	i2c_dev->msg_read = (msg->flags & I2C_M_RD);
> +
> +	packet_header = (0 << PACKET_HEADER0_HEADER_SIZE_SHIFT) |
> +			PACKET_HEADER0_PROTOCOL_I2C |
> +			(i2c_dev->adapter.nr << PACKET_HEADER0_CONT_ID_SHIFT) |
> +			(1 << PACKET_HEADER0_PACKET_ID_SHIFT);
> +	i2c_writel(i2c_dev, packet_header, I2C_TX_FIFO);
> +
> +	packet_header = msg->len - 1;
> +	i2c_writel(i2c_dev, packet_header, I2C_TX_FIFO);
> +
> +	packet_header = I2C_HEADER_IE_ENABLE;
> +	if (end_state == MSG_END_CONTINUE)
> +		packet_header |= I2C_HEADER_CONTINUE_XFER;
> +	else if (end_state == MSG_END_REPEAT_START)
> +		packet_header |= I2C_HEADER_REPEAT_START;
> +	if (msg->flags & I2C_M_TEN) {
> +		packet_header |= msg->addr;
> +		packet_header |= I2C_HEADER_10BIT_ADDR;
> +	} else {
> +		packet_header |= msg->addr << I2C_HEADER_SLAVE_ADDR_SHIFT;
> +	}
> +	if (msg->flags & I2C_M_IGNORE_NAK)
> +		packet_header |= I2C_HEADER_CONT_ON_NAK;
> +	if (msg->flags & I2C_M_RD)
> +		packet_header |= I2C_HEADER_READ;
> +	i2c_writel(i2c_dev, packet_header, I2C_TX_FIFO);
> +
> +	if (!(msg->flags & I2C_M_RD))
> +		tegra_i2c_fill_tx_fifo(i2c_dev);
> +
> +	ret = tegra_i2c_wait_completion(i2c_dev);
> +	if (ret) {
> +		dev_err(i2c_dev->dev, "i2c transfer timed out\n");
> +
> +		tegra_i2c_init(i2c_dev);
> +		return -ETIMEDOUT;
> +	}
> +
> +	if (likely(i2c_dev->msg_err == I2C_ERR_NONE))
> +		return 0;
> +
> +	/*
> +	 * NACK interrupt is generated before the I2C controller generates the
> +	 * STOP condition on the bus. So wait for 2 clock periods before resetting
> +	 * the controller so that STOP condition has been delivered properly.
> +	 */
> +	if (i2c_dev->msg_err == I2C_ERR_NO_ACK)
> +		udelay(DIV_ROUND_UP(2 * 1000000, i2c_dev->bus_clk_rate));
> +
> +	tegra_i2c_init(i2c_dev);
> +	if (i2c_dev->msg_err == I2C_ERR_NO_ACK) {
> +		if (msg->flags & I2C_M_IGNORE_NAK)
> +			return 0;
> +		return -EREMOTEIO;
> +	}
> +
> +	return -EIO;
> +}
> +
> +static int tegra_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[],
> +	int num)
> +{
> +	struct tegra_i2c_dev *i2c_dev = to_tegra_i2c_dev(adap);
> +	int i;
> +	int ret = 0;
> +
> +	ret = tegra_i2c_clock_enable(i2c_dev);
> +	if (ret < 0) {
> +		dev_err(i2c_dev->dev, "Clock enable failed %d\n", ret);
> +		return ret;
> +	}
> +
> +	for (i = 0; i < num; i++) {
> +		enum msg_end_type end_type = MSG_END_STOP;
> +		if (i < (num - 1))
> +			end_type = MSG_END_REPEAT_START;
> +		ret = tegra_i2c_xfer_msg(i2c_dev, &msgs[i], end_type);
> +		if (ret)
> +			break;
> +	}
> +	tegra_i2c_clock_disable(i2c_dev);
> +	return ret ?: i;

What does this return when ret is true? ret? I've never seen this.

> +	i2c_dev = xzalloc(sizeof(*i2c_dev));
> +	if (!i2c_dev) {
> +		dev_err(dev, "Could not allocate struct tegra_i2c_dev");
> +		return -ENOMEM;
> +	}

No need to check the result of xzalloc.

> +	ret = tegra_i2c_clock_enable(i2c_dev);
> +		if (ret < 0) {
> +			dev_err(i2c_dev->dev, "Clock enable failed %d\n", ret);
> +			return ret;
> +		}

Indentation broken here. tegra_i2c_init below also calls
tegra_i2c_clock_enable, so this should be unnecessary here, right?

> +	ret = tegra_i2c_init(i2c_dev);
> +	if (ret) {
> +		dev_err(dev, "Failed to initialize i2c controller");
> +		return ret;
> +	}
> +

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2014-05-12 11:50 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-05-12  7:07 [PATCH 00/25] Tegra-next Lucas Stach
2014-05-12  7:07 ` [PATCH 01/25] reset: add reset controller framework Lucas Stach
2014-05-12  7:07 ` [PATCH 02/25] tegra: lowlevel: add function to fetch chipid Lucas Stach
2014-05-12  7:07 ` [PATCH 03/25] reset: add tegra reset controller Lucas Stach
2014-05-12  7:07 ` [PATCH 04/25] clk: tegra: reset UARTS from clock controller Lucas Stach
2014-05-12  7:07 ` [PATCH 05/25] mci: tegra: add reset control Lucas Stach
2014-05-12  7:07 ` [PATCH 06/25] clk: tegra: remove device reset hack Lucas Stach
2014-05-12  7:07 ` [PATCH 07/25] clk: tegra: allow to register clocks with 16 bit divider Lucas Stach
2014-05-12  7:07 ` [PATCH 08/25] clk: tegra30: register i2c clocks Lucas Stach
2014-05-12  7:07 ` [PATCH 09/25] clk: tegra20: " Lucas Stach
2014-05-12  7:07 ` [PATCH 10/25] i2c: add Tegra driver Lucas Stach
2014-05-12 11:49   ` Sascha Hauer [this message]
2014-05-12 18:55     ` Lucas Stach
2014-05-12  7:07 ` [PATCH 11/25] ARM: tegra: beaver: activate sdmmc1 voltage rail Lucas Stach
2014-05-12  7:07 ` [PATCH 12/25] ARM: tegra: beaver: adjust pinmux to make sdmmc1 work Lucas Stach
2014-05-12  7:07 ` [PATCH 13/25] mci: tegra: apply pad autocalibration on T30 Lucas Stach
2014-05-12  7:07 ` [PATCH 14/25] mci: tegra: don't set 8bit mode unconditionally Lucas Stach
2014-05-12  7:07 ` [PATCH 15/25] pinctrl: tegra30: parse drive groups Lucas Stach
2014-05-12  7:07 ` [PATCH 16/25] scripts: tegra: import cbootimage Lucas Stach
2014-05-12  7:07 ` [PATCH 17/25] tegra: cbootimage: remove noisy output Lucas Stach
2014-05-12  7:07 ` [PATCH 18/25] Makefile.lib: add rule to built Tegra BCTs Lucas Stach
2014-05-12  7:08 ` [PATCH 19/25] images: add Tegra20 image build rules Lucas Stach
2014-05-12  7:08 ` [PATCH 20/25] images: add Tegra30 " Lucas Stach
2014-05-12  7:08 ` [PATCH 21/25] ARM: boards: colibri t20: import BCT cfgs Lucas Stach
2014-05-12  7:08 ` [PATCH 22/25] images: tegra: build all Toradex Colibri images Lucas Stach
2014-05-12  7:08 ` [PATCH 23/25] ARM: boards: beaver: import BCT cfg Lucas Stach
2014-05-12  7:08 ` [PATCH 24/25] images: tegra: build NVidia Beaver image Lucas Stach
2014-05-12  7:08 ` [PATCH 25/25] images: tegra: rename ac100 image Lucas Stach

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140512114936.GG5858@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=dev@lynxeye.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox