mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: Wadim Egorov <w.egorov@phytec.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH v2 3/4] ARM: omap: barebox update nand xloadslots handler
Date: Thu, 15 May 2014 14:58:19 +0200	[thread overview]
Message-ID: <20140515125819.GL5858@pengutronix.de> (raw)
In-Reply-To: <1400146868-17820-1-git-send-email-w.egorov@phytec.de>

On Thu, May 15, 2014 at 11:41:07AM +0200, Wadim Egorov wrote:
> - Added barebox nand xloadslots update handler
> - This handler updates all given xload slots in nand
> 
> Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
> ---
> v2:
>   - fixed xloadslots updater description in mach-omap/Kconfig
>   - changed method to pass device files
>   - added nand_bbu_handler struct
>   - added write_image()
> ---
>  arch/arm/mach-omap/Kconfig                      |   10 ++
>  arch/arm/mach-omap/Makefile                     |    1 +
>  arch/arm/mach-omap/am33xx_bbu_nand_xloadslots.c |  122 +++++++++++++++++++++++
>  arch/arm/mach-omap/include/mach/bbu.h           |   13 +++
>  4 files changed, 146 insertions(+), 0 deletions(-)
>  create mode 100644 arch/arm/mach-omap/am33xx_bbu_nand_xloadslots.c
> 
> diff --git a/arch/arm/mach-omap/Kconfig b/arch/arm/mach-omap/Kconfig
> index 12b9c1f..ee6d548 100644
> --- a/arch/arm/mach-omap/Kconfig
> +++ b/arch/arm/mach-omap/Kconfig
> @@ -93,6 +93,16 @@ config BAREBOX_UPDATE_AM33XX_SPI_NOR_MLO
>  	  Say Y for barebox update SPI NOR MLO handler.
>  	  AM35xx, AM33xx chips use big endian MLO for SPI NOR flash.
>  
> +config BAREBOX_UPDATE_AM33XX_NAND_XLOADSLOTS
> +	prompt "barebox update nand xload slots handler"
> +	bool
> +	depends on BAREBOX_UPDATE
> +	help
> +	  Say Y for barebox update nand xload slots handler.
> +	  This update handler updates 4 default nand xload slots
> +	  with a single command.
> +	  The Handler also checks if the given image has a valid CH header.
> +
>  config ARCH_TEXT_BASE
>  	hex
>  	default 0x80e80000 if MACH_OMAP343xSDP
> diff --git a/arch/arm/mach-omap/Makefile b/arch/arm/mach-omap/Makefile
> index 81a771e..c9b6f4b 100644
> --- a/arch/arm/mach-omap/Makefile
> +++ b/arch/arm/mach-omap/Makefile
> @@ -32,3 +32,4 @@ obj-$(CONFIG_MFD_TWL6030) += omap4_twl6030_mmc.o
>  obj-$(CONFIG_OMAP4_USBBOOT) += omap4_rom_usb.o
>  obj-$(CONFIG_CMD_BOOT_ORDER) += boot_order.o
>  obj-$(CONFIG_BAREBOX_UPDATE_AM33XX_SPI_NOR_MLO) += am33xx_bbu_spi_mlo.o
> +obj-$(CONFIG_BAREBOX_UPDATE_AM33XX_NAND_XLOADSLOTS) += am33xx_bbu_nand_xloadslots.o
> diff --git a/arch/arm/mach-omap/am33xx_bbu_nand_xloadslots.c b/arch/arm/mach-omap/am33xx_bbu_nand_xloadslots.c
> new file mode 100644
> index 0000000..0b4f1cc
> --- /dev/null
> +++ b/arch/arm/mach-omap/am33xx_bbu_nand_xloadslots.c
> @@ -0,0 +1,122 @@
> +/*
> + * am33xx_bbu_nand_xloadslots.c - barebox update handler for
> + * the nand xload slots.
> + *
> + * Copyright (c) 2014 Wadim Egorov <w.egorov@phytec.de>, Phytec
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2
> + * as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <common.h>
> +#include <malloc.h>
> +#include <errno.h>
> +#include <bbu.h>
> +#include <fs.h>
> +#include <fcntl.h>
> +#include <filetype.h>
> +
> +struct nand_bbu_handler {
> +	struct bbu_handler bbu_handler;
> +	char **devicefile;
> +	int num_devicefiles;
> +};
> +
> +static int write_image(const char *devfile, const void *image, size_t size)
> +{
> +	int fd = 0;
> +	int ret = 0;
> +
> +	fd = open(devfile, O_WRONLY);
> +	if (fd < 0) {
> +		pr_err("could not open %s: %s\n", devfile,
> +			errno_str());
> +		return fd;
> +	}
> +
> +	ret = erase(fd, ~0, 0);
> +	if (ret < 0) {
> +		pr_err("could not erase %s: %s\n", devfile,
> +			errno_str());
> +		close(fd);
> +		return ret;
> +	}
> +
> +	ret = write(fd, image, size);
> +	if (ret < 0) {
> +		pr_err("could not write to fd %s: %s\n", devfile,
> +			errno_str());
> +		close(fd);
> +		return ret;
> +	}
> +
> +	close(fd);
> +
> +	return 0;
> +}
> +
> +/*
> + * This handler updates all given xload slots in nand with an image.
> + */
> +static int nand_xloadslots_update_handler(struct bbu_handler *handler,
> +					struct bbu_data *data)
> +{
> +	int ret = 0;
> +	const void *image = data->image;
> +	size_t size = data->len;
> +	struct nand_bbu_handler *nh;
> +	int i = 0;
> +
> +	if (file_detect_type(image, size) != filetype_ch_image) {
> +		pr_err("%s is not a valid ch-image\n", data->imagefile);
> +		return -EINVAL;
> +	}
> +
> +	nh = container_of(handler, struct nand_bbu_handler, bbu_handler);
> +
> +	/* check if the devicefile has been overwritten */
> +	if (strcmp(data->devicefile, nh->devicefile[0]) != 0) {
> +		ret = bbu_confirm(data);
> +		if (ret != 0)
> +			return ret;
> +
> +		ret = write_image(data->devicefile, image, size);
> +		if (ret != 0)
> +			return ret;
> +	} else {
> +		for (i = 0; i < nh->num_devicefiles; i++) {
> +			ret =  write_image(nh->devicefile[i], image, size);
> +			if (ret != 0)
> +				return ret;
> +		}
> +	}
> +
> +	return 0;
> +}
> +
> +int am33xx_bbu_nand_xloadslots_register_handler(const char *name,
> +						char **devicefile,
> +						int num_devicefiles)
> +{
> +	struct nand_bbu_handler *handler;
> +	int ret;
> +
> +	handler = xzalloc(sizeof(*handler));
> +	handler->devicefile = devicefile;
> +	handler->num_devicefiles = num_devicefiles;
> +	handler->bbu_handler.devicefile = devicefile[0];
> +	handler->bbu_handler.handler = nand_xloadslots_update_handler;
> +	handler->bbu_handler.name = name;
> +
> +	ret = bbu_register_handler(&handler->bbu_handler);
> +	if (ret)
> +		free(handler);
> +
> +	return ret;
> +}
> diff --git a/arch/arm/mach-omap/include/mach/bbu.h b/arch/arm/mach-omap/include/mach/bbu.h
> index 6d4b70f..74eae15 100644
> --- a/arch/arm/mach-omap/include/mach/bbu.h
> +++ b/arch/arm/mach-omap/include/mach/bbu.h
> @@ -12,4 +12,17 @@ int am33xx_bbu_spi_nor_mlo_register_handler(const char *name, char *devicefile)
>  }
>  #endif
>  
> +#ifdef CONFIG_BAREBOX_UPDATE_AM33XX_NAND_XLOADSLOTS
> +int am33xx_bbu_nand_xloadslots_register_handler(const char *name,
> +						char **devicefile,
> +						int num_devicefiles);
> +#else
> +int am33xx_bbu_nand_xloadslots_register_handler(const char *name,
> +						char **devicefile,
> +						int num_devicefiles)

static inline missing here.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

      parent reply	other threads:[~2014-05-15 12:58 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-05-15  9:41 Wadim Egorov
2014-05-15  9:41 ` [PATCH v2 4/4] phycore-am335x: Added bbu " Wadim Egorov
2014-05-15  9:48   ` Alexander Aring
2014-05-15  9:55     ` Alexander Aring
2014-05-15 12:59   ` Sascha Hauer
2014-05-15 12:58 ` Sascha Hauer [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140515125819.GL5858@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=w.egorov@phytec.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox