mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: Renaud Barbier <renaud.barbier@ge.com>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH] gianfar: descriptors access with I/O accessors
Date: Wed, 23 Jul 2014 09:16:34 +0200	[thread overview]
Message-ID: <20140723071634.GH23235@pengutronix.de> (raw)
In-Reply-To: <1406038578-29583-1-git-send-email-renaud.barbier@ge.com>

On Tue, Jul 22, 2014 at 03:16:18PM +0100, Renaud Barbier wrote:
> As in U-Boot git-9c9141f, make read/write access to the TX/RX
> descriptors CPU agnostic.
> 
> Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>

Applied, thanks

Sascha

> ---
>  drivers/net/gianfar.c | 70 +++++++++++++++++++++++++--------------------------
>  drivers/net/gianfar.h | 16 ++++++------
>  2 files changed, 43 insertions(+), 43 deletions(-)
> 
> diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
> index 3370b5c..a308035 100644
> --- a/drivers/net/gianfar.c
> +++ b/drivers/net/gianfar.c
> @@ -199,19 +199,19 @@ static int gfar_open(struct eth_device *edev)
>  
>  	/* Initialize the Rx Buffer descriptors */
>  	for (ix = 0; ix < RX_BUF_CNT; ix++) {
> -		priv->rxbd[ix].status = RXBD_EMPTY;
> -		priv->rxbd[ix].length = 0;
> -		priv->rxbd[ix].bufPtr = (uint) NetRxPackets[ix];
> +		out_be16(&priv->rxbd[ix].status, RXBD_EMPTY);
> +		out_be16(&priv->rxbd[ix].length, 0);
> +		out_be32(&priv->rxbd[ix].bufPtr, (uint) NetRxPackets[ix]);
>  	}
> -	priv->rxbd[RX_BUF_CNT - 1].status |= RXBD_WRAP;
> +	out_be16(&priv->rxbd[RX_BUF_CNT - 1].status, RXBD_EMPTY | RXBD_WRAP);
>  
>  	/* Initialize the TX Buffer Descriptors */
>  	for (ix = 0; ix < TX_BUF_CNT; ix++) {
> -		priv->txbd[ix].status = 0;
> -		priv->txbd[ix].length = 0;
> -		priv->txbd[ix].bufPtr = 0;
> +		out_be16(&priv->txbd[ix].status, 0);
> +		out_be16(&priv->txbd[ix].length, 0);
> +		out_be32(&priv->txbd[ix].bufPtr, 0);
>  	}
> -	priv->txbd[TX_BUF_CNT - 1].status |= TXBD_WRAP;
> +	out_be16(&priv->txbd[TX_BUF_CNT - 1].status, TXBD_WRAP);
>  
>  	/* Enable Transmit and Receive */
>  	setbits_be32(regs + GFAR_MACCFG1_OFFSET, GFAR_MACCFG1_RX_EN |
> @@ -366,30 +366,32 @@ static int gfar_send(struct eth_device *edev, void *packet, int length)
>  	struct device_d *dev = edev->parent;
>  	uint64_t start;
>  	uint tidx;
> +	uint16_t status;
>  
>  	tidx = priv->txidx;
> -	priv->txbd[tidx].bufPtr = (uint) packet;
> -	priv->txbd[tidx].length = length;
> -	priv->txbd[tidx].status |= (TXBD_READY | TXBD_LAST |
> -				TXBD_CRC | TXBD_INTERRUPT);
> +	out_be32(&priv->txbd[tidx].bufPtr, (u32) packet);
> +	out_be16(&priv->txbd[tidx].length, length);
> +	out_be16(&priv->txbd[tidx].status,
> +		in_be16(&priv->txbd[tidx].status) |
> +		(TXBD_READY | TXBD_LAST | TXBD_CRC | TXBD_INTERRUPT));
>  
>  	/* Tell the DMA to go */
>  	out_be32(regs + GFAR_TSTAT_OFFSET, GFAR_TSTAT_CLEAR_THALT);
>  
>  	/* Wait for buffer to be transmitted */
>  	start = get_time_ns();
> -	while (priv->txbd[tidx].status & TXBD_READY) {
> +	while (in_be16(&priv->txbd[tidx].status) & TXBD_READY) {
>  		if (is_timeout(start, 5 * MSECOND)) {
>  			break;
>  		}
>  	}
>  
> -	if (priv->txbd[tidx].status & TXBD_READY) {
> -		dev_err(dev, "tx timeout: 0x%x\n", priv->txbd[tidx].status);
> +	status = in_be16(&priv->txbd[tidx].status);
> +	if (status & TXBD_READY) {
> +		dev_err(dev, "tx timeout: 0x%x\n", status);
>  		return -EBUSY;
> -	}
> -	else if (priv->txbd[tidx].status & TXBD_STATS) {
> -		dev_err(dev, "TX error: 0x%x\n", priv->txbd[tidx].status);
> +	} else if (status & TXBD_STATS) {
> +		dev_err(dev, "TX error: 0x%x\n", status);
>  		return -EIO;
>  	}
>  
> @@ -403,31 +405,28 @@ static int gfar_recv(struct eth_device *edev)
>  	struct gfar_private *priv = edev->priv;
>  	struct device_d *dev = edev->parent;
>  	void __iomem *regs = priv->regs;
> -	int length;
> +	uint16_t status, length;
>  
> -	if (priv->rxbd[priv->rxidx].status & RXBD_EMPTY) {
> -		return 0; /* no data */
> -	}
> +	if (in_be16(&priv->rxbd[priv->rxidx].status) & RXBD_EMPTY)
> +		return 0;
>  
> -	length = priv->rxbd[priv->rxidx].length;
> +	length = in_be16(&priv->rxbd[priv->rxidx].length);
>  
>  	/* Send the packet up if there were no errors */
> -	if (!(priv->rxbd[priv->rxidx].status & RXBD_STATS)) {
> +	status = in_be16(&priv->rxbd[priv->rxidx].status);
> +	if (!(status & RXBD_STATS))
>  		net_receive(edev, NetRxPackets[priv->rxidx], length - 4);
> -	} else {
> -		dev_err(dev, "Got error %x\n",
> -		       (priv->rxbd[priv->rxidx].status & RXBD_STATS));
> -	}
> +	else
> +		dev_err(dev, "Got error %x\n", status & RXBD_STATS);
>  
> -	priv->rxbd[priv->rxidx].length = 0;
> +	out_be16(&priv->rxbd[priv->rxidx].length, 0);
>  
> +	status = RXBD_EMPTY;
>  	/* Set the wrap bit if this is the last element in the list */
>  	if ((priv->rxidx + 1) == RX_BUF_CNT)
> -		priv->rxbd[priv->rxidx].status = RXBD_WRAP;
> -	else
> -		priv->rxbd[priv->rxidx].status = 0;
> +		status |= RXBD_WRAP;
>  
> -	priv->rxbd[priv->rxidx].status |= RXBD_EMPTY;
> +	out_be16(&priv->rxbd[priv->rxidx].status, status);
>  	priv->rxidx = (priv->rxidx + 1) % RX_BUF_CNT;
>  
>  	if (in_be32(regs + GFAR_IEVENT_OFFSET) & GFAR_IEVENT_BSY) {
> @@ -517,8 +516,9 @@ static int gfar_probe(struct device_d *dev)
>  	size = ((TX_BUF_CNT * sizeof(struct txbd8)) +
>  		(RX_BUF_CNT * sizeof(struct rxbd8))) + BUF_ALIGN;
>  	p = (char *)xmemalign(BUF_ALIGN, size);
> -	priv->txbd = (struct txbd8 *)p;
> -	priv->rxbd = (struct rxbd8 *)(p + (TX_BUF_CNT * sizeof(struct txbd8)));
> +	priv->txbd = (struct txbd8 __iomem *)p;
> +	priv->rxbd = (struct rxbd8 __iomem *)(p +
> +			(TX_BUF_CNT * sizeof(struct txbd8)));
>  
>  	edev->priv = priv;
>  	edev->init = gfar_init;
> diff --git a/drivers/net/gianfar.h b/drivers/net/gianfar.h
> index 1aac479..c0b9763 100644
> --- a/drivers/net/gianfar.h
> +++ b/drivers/net/gianfar.h
> @@ -188,15 +188,15 @@
>  #define RXBD_STATS		0x003f
>  
>  struct txbd8 {
> -	ushort	     status;	     /* Status Fields */
> -	ushort	     length;	     /* Buffer length */
> -	uint	     bufPtr;	     /* Buffer Pointer */
> +	uint16_t     status;	     /* Status Fields */
> +	uint16_t     length;	     /* Buffer length */
> +	uint32_t     bufPtr;	     /* Buffer Pointer */
>  };
>  
>  struct rxbd8 {
> -	ushort	     status;	     /* Status Fields */
> -	ushort	     length;	     /* Buffer Length */
> -	uint	     bufPtr;	     /* Buffer Pointer */
> +	uint16_t     status;	     /* Status Fields */
> +	uint16_t     length;	     /* Buffer Length */
> +	uint32_t     bufPtr;	     /* Buffer Pointer */
>  };
>  
>  /* eTSEC general control and status registers */
> @@ -275,8 +275,8 @@ struct gfar_private {
>  	struct gfar_phy *gfar_mdio;
>  	struct gfar_phy *gfar_tbi;
>  	struct phy_info *phyinfo;
> -	volatile struct txbd8 *txbd;
> -	volatile struct rxbd8 *rxbd;
> +	struct txbd8 __iomem *txbd;
> +	struct rxbd8 __iomem *rxbd;
>  	uint txidx;
>  	uint rxidx;
>  	uint phyaddr;
> -- 
> 1.8.3.1
> 
> 
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

      reply	other threads:[~2014-07-23  7:16 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-07-22 14:16 Renaud Barbier
2014-07-23  7:16 ` Sascha Hauer [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140723071634.GH23235@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=renaud.barbier@ge.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox