mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>,
	barebox@lists.infradead.org
Subject: Re: [PATCH 0/5] mvebu: Add network support for Armada 370/XP
Date: Mon, 1 Sep 2014 10:55:09 +0200	[thread overview]
Message-ID: <20140901085509.GH5352@pengutronix.de> (raw)
In-Reply-To: <1408834420-899-1-git-send-email-ezequiel.garcia@free-electrons.com>

Ezequiel,

I'm fine with this series, so with the comments from Sebastian fixed I
could apply it.

Sascha

On Sat, Aug 23, 2014 at 07:53:35PM -0300, Ezequiel Garcia wrote:
> Here goes a new round of the support for the network controller present
> on Marvell Armada 370/XP SoC.
> 
> The first patch enables the peripherals in a PUP register, which is required
> on RGMII ports.
> 
> The second and third patches add support for Marvell's 88E1543 and 88E1545 PHY
> chips.
> 
> The fourth patch adds the mvneta driver. Most of the configuration part is
> based on Linux's mvneta driver, while some of code organization is based
> on Barebox's orion-gbe driver.
> 
> The last patch adds network support in the defconfigs.
> 
> This has been tested on Armada XP GP, Armada XP Openblocks AX3 and
> Armada 370 Mirabox boards. Linux zImage loads and boots fine, and the
> network interfaces work from the kernel.
> 
> Ezequiel Garcia (5):
>   ARM: mvebu: Enable PUP register
>   net: phy: Support Marvell 88EE1545 PHY
>   net: phy: Support Marvell 88EE1543 PHY
>   net: Add driver for Armada 370/XP 10/100/1000 Mbps network controller
>   configs: Add network options to Armada 370/XP boards
> 
>  arch/arm/configs/globalscale_mirabox_defconfig     |   4 +
>  arch/arm/configs/marvell_armada_xp_gp_defconfig    |   4 +
>  arch/arm/configs/plathome_openblocks_ax3_defconfig |   4 +
>  arch/arm/mach-mvebu/armada-370-xp.c                |   5 +
>  .../mach-mvebu/include/mach/armada-370-xp-regs.h   |   7 +
>  drivers/net/Kconfig                                |   6 +
>  drivers/net/Makefile                               |   1 +
>  drivers/net/mvneta.c                               | 758 +++++++++++++++++++++
>  drivers/net/phy/marvell.c                          |  69 ++
>  9 files changed, 858 insertions(+)
>  create mode 100644 drivers/net/mvneta.c
> 
> -- 
> 2.0.1
> 
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

      parent reply	other threads:[~2014-09-01  8:55 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-08-23 22:53 Ezequiel Garcia
2014-08-23 22:53 ` [PATCH 1/5] ARM: mvebu: Enable PUP register Ezequiel Garcia
2014-08-26 14:28   ` Sebastian Hesselbarth
2014-08-23 22:53 ` [PATCH 2/5] net: phy: Support Marvell 88EE1545 PHY Ezequiel Garcia
2014-08-23 22:53 ` [PATCH 3/5] net: phy: Support Marvell 88EE1543 PHY Ezequiel Garcia
2014-08-26 20:13   ` [PATCH] net: phy: Support Marvell 88E1318S and 88E1510 PHYs Sebastian Hesselbarth
2014-08-23 22:53 ` [PATCH 4/5] net: Add driver for Armada 370/XP 10/100/1000 Mbps network controller Ezequiel Garcia
2014-08-26 14:30   ` Sebastian Hesselbarth
2014-08-26 16:20     ` Ezequiel Garcia
2014-08-26 20:06   ` Sebastian Hesselbarth
2014-08-23 22:53 ` [PATCH 5/5] configs: Add network options to Armada 370/XP boards Ezequiel Garcia
2014-09-01  8:55 ` Sascha Hauer [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140901085509.GH5352@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=ezequiel.garcia@free-electrons.com \
    --cc=thomas.petazzoni@free-electrons.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox