mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: "Raphaël Poggi" <raphio98@gmail.com>
To: Bo Shen <voice.shen@atmel.com>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH 8/9] ARM: at91: add sama5d4 soc support #2
Date: Sat, 13 Sep 2014 22:12:31 +0200	[thread overview]
Message-ID: <20140913201231.GB22947@gmail.com> (raw)
In-Reply-To: <1410949295-30296-9-git-send-email-voice.shen@atmel.com>

Hello,

Le Wednesday 17 Sep 2014 à 18:21:34 (+0800), Bo Shen a écrit :
> Signed-off-by: Bo Shen <voice.shen@atmel.com>
> ---
> 
>  arch/arm/mach-at91/include/mach/sama5d4.h | 134 ++++++++
>  arch/arm/mach-at91/sama5d4.c              | 303 ++++++++++++++++++
>  arch/arm/mach-at91/sama5d4_devices.c      | 495 ++++++++++++++++++++++++++++++
>  3 files changed, 932 insertions(+)
>  create mode 100644 arch/arm/mach-at91/include/mach/sama5d4.h
>  create mode 100644 arch/arm/mach-at91/sama5d4.c
>  create mode 100644 arch/arm/mach-at91/sama5d4_devices.c
> 
> diff --git a/arch/arm/mach-at91/include/mach/sama5d4.h b/arch/arm/mach-at91/include/mach/sama5d4.h
> new file mode 100644
> index 0000000..046fdb0
> --- /dev/null
> +++ b/arch/arm/mach-at91/include/mach/sama5d4.h
> @@ -0,0 +1,134 @@
> +/*
> + * Chip-specific header file for the SAMA5D4 family
> + *
> + * Copyright (C) 2014 Atmel Corporation,
> + *		      Bo Shen <voice.shen@atmel.com>
> + *
> + * Common definitions.
> + * Based on SAMA5D4 datasheet.
> + *
> + * Licensed under GPLv2 or later.
> + */
> +
> +#ifndef SAMA5D4_H
> +#define SAMA5D4_H
> +
> +/*
> + * Peripheral identifiers/interrupts.
> + */
> +#define SAMA5D4_ID_PIT		 3
> +#define SAMA5D4_ID_WDT		 4
> +#define SAMA5D4_ID_PIOD		 5
> +#define SAMA5D4_ID_USART0	 6
> +#define SAMA5D4_ID_USART1	 7
> +#define SAMA5D4_ID_DMA0		 8
> +#define SAMA5D4_ID_ICM		 9
> +#define SAMA5D4_ID_PKCC		10
> +#define SAMA5D4_ID_SCI		11
> +#define SAMA5D4_ID_AES		12
> +#define SAMA5D4_ID_AESB		13
> +#define SAMA5D4_ID_TDES		14
> +#define SAMA5D4_ID_SHA		15
> +#define SAMA5D4_ID_MPDDRC	16
> +#define SAMA5D4_ID_MATRIX1	17
> +#define SAMA5D4_ID_MATRIX0	18
> +#define SAMA5D4_ID_VDEC		19
> +#define SAMA5D4_ID_SECUMOD	20
> +#define SAMA5D4_ID_MSADCC	21
> +#define SAMA5D4_ID_HSMC		22
> +#define SAMA5D4_ID_PIOA		23
> +#define SAMA5D4_ID_PIOB		24
> +#define SAMA5D4_ID_PIOC		25
> +#define SAMA5D4_ID_PIOE		26
> +#define SAMA5D4_ID_UART0	27
> +#define SAMA5D4_ID_UART1	28
> +#define SAMA5D4_ID_USART2	29
> +#define SAMA5D4_ID_USART3	30
> +#define SAMA5D4_ID_USART4	31
> +#define SAMA5D4_ID_TWI0		32
> +#define SAMA5D4_ID_TWI1		33
> +#define SAMA5D4_ID_TWI2		34
> +#define SAMA5D4_ID_HSMCI0	35
> +#define SAMA5D4_ID_HSMCI1	36
> +#define SAMA5D4_ID_SPI0		37
> +#define SAMA5D4_ID_SPI1		38
> +#define SAMA5D4_ID_SPI2		39
> +#define SAMA5D4_ID_TC0		40
> +#define SAMA5D4_ID_TC1		41
> +#define SAMA5D4_ID_TC2		42
> +#define SAMA5D4_ID_PWM		43
> +#define SAMA5D4_ID_ADC		44
> +#define SAMA5D4_ID_DBGU		45
> +#define SAMA5D4_ID_UHPHS	46
> +#define SAMA5D4_ID_UDPHS	47
> +#define SAMA5D4_ID_SSC0		48
> +#define SAMA5D4_ID_SSC1		49
> +#define SAMA5D4_ID_DMA1		50
> +#define SAMA5D4_ID_LCDC		51
> +#define SAMA5D4_ID_ISI		52
> +#define SAMA5D4_ID_TRNG		53
> +#define SAMA5D4_ID_GMAC0	54
> +#define SAMA5D4_ID_IRQ		56
> +#define SAMA5D4_ID_IRQ		56
> +#define SAMA5D4_ID_SFC		57
> +#define SAMA5D4_ID_SECURAM	59
> +#define SAMA5D4_ID_CTB		60
> +#define SAMA5D4_ID_SMD		61
> +#define SAMA5D4_ID_TWI3		62
> +#define SAMA5D4_ID_CATB		63
> +#define SAMA5D4_ID_SFR		64
> +#define SAMA5D4_ID_AIC		65
> +#define SAMA5D4_ID_SAIC		66
> +#define SAMA5D4_ID_L2CC		67
> +
> +/*
> + * User Peripheral physical base addresses.
> + */
> +
> +#define SAMA5D4_BASE_LCDC	0xf0000000 /* (HLCDC5) Base Address */
> +#define SAMA5D4_BASE_MPDDRC	0xf0010000 /* (MPDDRC) Base Address */
> +#define SAMA5D4_BASE_PMC	0xf0018000 /* (PMC) Base Address */
> +#define SAMA5D4_BASE_HSMCI0	0xf8000000 /* (MMCI0) Base Address */
> +#define SAMA5D4_BASE_UART0	0xf8004000 /* (UART0) Base Address */
> +#define SAMA5D4_BASE_SPI0	0xf8010000 /* (SPI0) Base Address */
> +#define SAMA5D4_BASE_TC0	0xf801c000 /* (TC0) Base Address */
> +#define SAMA5D4_BASE_GMAC0	0xf8020000 /* (GMAC0) Base Address */
> +#define SAMA5D4_BASE_USART0	0xf802c000 /* (USART0) Base Address */
> +#define SAMA5D4_BASE_USART1	0xf8030000 /* (USART1) Base Address */
> +#define SAMA5D4_BASE_HSMCI1	0xfc000000 /* (HSMCI1) Base Address */
> +#define SAMA5D4_BASE_UART1	0xfc004000 /* (UART1) Base Address */
> +#define SAMA5D4_BASE_USART2	0xfc008000 /* (USART2) Base Address */
> +#define SAMA5D4_BASE_USART3	0xfc00c000 /* (USART3) Base Address */
> +#define SAMA5D4_BASE_USART4	0xfc010000 /* (USART4) Base Address */
> +#define SAMA5D4_BASE_SPI1	0xfc018000 /* (SPI1) Base Address */
> +#define SAMA5D4_BASE_GMAC1	0xfc028000 /* (GMAC1) Base Address */
> +#define SAMA5D4_BASE_HSMC	0xfc05c000 /* (HSMC) Base Address */
> +#define SAMA5D4_BASE_PMECC	0xfc05c070 /* (PMECC) Base Address */
> +#define SAMA5D4_BASE_PMERRLOC	0xfc05c500 /* (PMERRLOC) Base Address */
> +#define SAMA5D4_BASE_PIOD	0xfc068000 /* (PIOD) Base Address */
> +#define SAMA5D4_BASE_PIT	0xfc068630 /* (PIT) Base Address */
> +#define SAMA5D4_BASE_DBGU	0xfc069000 /* (DBGU) Base Address */
> +#define SAMA5D4_BASE_PIOA	0xfc06a000 /* (PIOA) Base Address */
> +#define SAMA5D4_BASE_PIOB	0xfc06b000 /* (PIOB) Base Address */
> +#define SAMA5D4_BASE_PIOC	0xfc06c000 /* (PIOC) Base Address */
> +#define SAMA5D4_BASE_PIOE	0xfc06d000 /* (PIOE) Base Address */
> +#define SAMA5D4_BASE_AIC	0xfc06e000 /* (AIC) Base Address */
> +
> +#define SAMA5D4_CHIPSELECT_3	0x80000000
> +
> +/*
> + * Internal Memory.
> + */
> +#define SAMA5D4_SRAM_BASE	0x00200000	/* Internal SRAM base address */
> +#define SAMA5D4_SRAM_SIZE	(128 * SZ_1K)	/* Internal SRAM size */
> +
> +#define AT91_NB_USART		7
> +#define AT91_BASE_SYS		0xf0000000
> +#define AT91_PMC		SAMA5D4_BASE_PMC
> +#define AT91_DDRSDRC0		(0xf0010000 - AT91_BASE_SYS)
> +#define AT91_RSTC		(0xfc068600 - AT91_BASE_SYS)
> +#define SAMA5D3_BASE_MPDDRC	SAMA5D4_BASE_MPDDRC
> +#define SAMA5D3_SRAM_BASE	SAMA5D4_SRAM_BASE
> +#define SAMA5D3_SRAM_SIZE	SAMA5D4_SRAM_SIZE
> +
> +#endif
> diff --git a/arch/arm/mach-at91/sama5d4.c b/arch/arm/mach-at91/sama5d4.c
> new file mode 100644
> index 0000000..efab3a8
> --- /dev/null
> +++ b/arch/arm/mach-at91/sama5d4.c
> @@ -0,0 +1,303 @@
> +/*
> + * Chip-specific setup code for the SAMA5D4 family
> + *
> + * Copyright (C) 2014 Atmel Corporation,
> + *		      Bo Shen <voice.shen@atmel.com>
> + *
> + * Licensed under GPLv2 or later.
> + */
> +
> +#include <common.h>
> +#include <gpio.h>
> +#include <init.h>
> +#include <mach/hardware.h>
> +#include <mach/at91_pmc.h>
> +#include <mach/io.h>
> +#include <mach/cpu.h>
> +#include <linux/clk.h>
> +
> +#include "soc.h"
> +#include "generic.h"
> +#include "clock.h"
> +
> +/*
> + * The peripheral clocks.
> + */
> +static struct clk pit_clk = {
> +	.name		= "pit_clk",
> +	.pid		= SAMA5D4_ID_PIT,
> +	.type		= CLK_TYPE_PERIPHERAL,
> +};
> +static struct clk smc_clk = {
> +	.name		= "smc_clk",
> +	.pid		= SAMA5D4_ID_HSMC,
> +	.type		= CLK_TYPE_PERIPHERAL,
> +};
> +static struct clk pioA_clk = {
> +	.name		= "pioA_clk",
> +	.pid		= SAMA5D4_ID_PIOA,
> +	.type		= CLK_TYPE_PERIPHERAL,
> +};
> +static struct clk pioB_clk = {
> +	.name		= "pioB_clk",
> +	.pid		= SAMA5D4_ID_PIOB,
> +	.type		= CLK_TYPE_PERIPHERAL,
> +};
> +static struct clk pioC_clk = {
> +	.name		= "pioC_clk",
> +	.pid		= SAMA5D4_ID_PIOC,
> +	.type		= CLK_TYPE_PERIPHERAL,
> +};
> +static struct clk pioD_clk = {
> +	.name		= "pioD_clk",
> +	.pid		= SAMA5D4_ID_PIOD,
> +	.type		= CLK_TYPE_PERIPHERAL,
> +};
> +static struct clk pioE_clk = {
> +	.name		= "pioE_clk",
> +	.pid		= SAMA5D4_ID_PIOE,
> +	.type		= CLK_TYPE_PERIPHERAL,
> +};
> +static struct clk usart0_clk = {
> +	.name		= "usart0_clk",
> +	.pid		= SAMA5D4_ID_USART0,
> +	.type		= CLK_TYPE_PERIPHERAL,
> +};
> +static struct clk usart2_clk = {
> +	.name		= "usart2_clk",
> +	.pid		= SAMA5D4_ID_USART2,
> +	.type		= CLK_TYPE_PERIPHERAL,
> +};
> +static struct clk usart3_clk = {
> +	.name		= "usart3_clk",
> +	.pid		= SAMA5D4_ID_USART3,
> +	.type		= CLK_TYPE_PERIPHERAL,
> +};
> +static struct clk usart4_clk = {
> +	.name		= "usart4_clk",
> +	.pid		= SAMA5D4_ID_USART4,
> +	.type		= CLK_TYPE_PERIPHERAL,
> +};
> +static struct clk mmc0_clk = {
> +	.name		= "mci0_clk",
> +	.pid		= SAMA5D4_ID_HSMCI0,
> +	.type		= CLK_TYPE_PERIPHERAL,
> +};
> +static struct clk mmc1_clk = {
> +	.name		= "mci1_clk",
> +	.pid		= SAMA5D4_ID_HSMCI1,
> +	.type		= CLK_TYPE_PERIPHERAL,
> +};
> +static struct clk tcb0_clk = {
> +	.name		= "tcb0_clk",
> +	.pid		= SAMA5D4_ID_TC0,
> +	.type		= CLK_TYPE_PERIPHERAL,
> +};
> +static struct clk tcb1_clk = {
> +	.name		= "tcb1_clk",
> +	.pid		= SAMA5D4_ID_TC1,
> +	.type		= CLK_TYPE_PERIPHERAL,
> +};
> +static struct clk adc_clk = {
> +	.name		= "adc_clk",
> +	.pid		= SAMA5D4_ID_ADC,
> +	.type		= CLK_TYPE_PERIPHERAL,
> +};
> +static struct clk dma0_clk = {
> +	.name		= "dma0_clk",
> +	.pid		= SAMA5D4_ID_DMA0,
> +	.type		= CLK_TYPE_PERIPHERAL | CLK_TYPE_PERIPH_H64MX,
> +};
> +static struct clk dma1_clk = {
> +	.name		= "dma1_clk",
> +	.pid		= SAMA5D4_ID_DMA1,
> +	.type		= CLK_TYPE_PERIPHERAL | CLK_TYPE_PERIPH_H64MX,
> +};
> +static struct clk uhphs_clk = {
> +	.name		= "uhphs",
> +	.pid		= SAMA5D4_ID_UHPHS,
> +	.type		= CLK_TYPE_PERIPHERAL,
> +};
> +static struct clk udphs_clk = {
> +	.name		= "udphs_clk",
> +	.pid		= SAMA5D4_ID_UDPHS,
> +	.type		= CLK_TYPE_PERIPHERAL,
> +};
> +static struct clk lcdc_clk = {
> +	.name		= "lcdc_clk",
> +	.pid		= SAMA5D4_ID_LCDC,
> +	.type		= CLK_TYPE_PERIPHERAL | CLK_TYPE_PERIPH_H64MX,
> +};
> +static struct clk isi_clk = {
> +	.name		= "isi_clk",
> +	.pid		= SAMA5D4_ID_ISI,
> +	.type		= CLK_TYPE_PERIPHERAL | CLK_TYPE_PERIPH_H64MX,
> +};
> +static struct clk macb0_clk = {
> +	.name		= "macb0_clk",
> +	.pid		= SAMA5D4_ID_GMAC0,
> +	.type		= CLK_TYPE_PERIPHERAL,
> +};
> +static struct clk twi0_clk = {
> +	.name		= "twi0_clk",
> +	.pid		= SAMA5D4_ID_TWI0,
> +	.type		= CLK_TYPE_PERIPHERAL,
> +};
> +static struct clk twi2_clk = {
> +	.name		= "twi2_clk",
> +	.pid		= SAMA5D4_ID_TWI2,
> +	.type		= CLK_TYPE_PERIPHERAL,
> +};
> +static struct clk spi0_clk = {
> +	.name		= "spi0_clk",
> +	.pid		= SAMA5D4_ID_SPI0,
> +	.type		= CLK_TYPE_PERIPHERAL,
> +};
> +static struct clk smd_clk = {
> +	.name		= "smd_clk",
> +	.pid		= SAMA5D4_ID_SMD,
> +	.type		= CLK_TYPE_PERIPHERAL,
> +};
> +static struct clk ssc0_clk = {
> +	.name		= "ssc0_clk",
> +	.pid		= SAMA5D4_ID_SSC0,
> +	.type		= CLK_TYPE_PERIPHERAL,
> +};
> +static struct clk ssc1_clk = {
> +	.name		= "ssc1_clk",
> +	.pid		= SAMA5D4_ID_SSC1,
> +	.type		= CLK_TYPE_PERIPHERAL,
> +};
> +static struct clk sha_clk = {
> +	.name		= "sha_clk",
> +	.pid		= SAMA5D4_ID_SHA,
> +	.type		= CLK_TYPE_PERIPHERAL,
> +};
> +static struct clk aes_clk = {
> +	.name		= "aes_clk",
> +	.pid		= SAMA5D4_ID_AES,
> +	.type		= CLK_TYPE_PERIPHERAL,
> +};
> +static struct clk tdes_clk = {
> +	.name		= "tdes_clk",
> +	.pid		= SAMA5D4_ID_TDES,
> +	.type		= CLK_TYPE_PERIPHERAL,
> +};
> +
> +static struct clk *periph_clocks[] __initdata = {
> +	&pit_clk,
> +	&smc_clk,
> +	&pioA_clk,
> +	&pioB_clk,
> +	&pioC_clk,
> +	&pioD_clk,
> +	&pioE_clk,
> +	&usart0_clk,
> +	&usart2_clk,
> +	&usart3_clk,
> +	&usart4_clk,
> +	&mmc0_clk,
> +	&mmc1_clk,
> +	&tcb0_clk,
> +	&tcb1_clk,
> +	&adc_clk,
> +	&dma0_clk,
> +	&dma1_clk,
> +	&uhphs_clk,
> +	&udphs_clk,
> +	&lcdc_clk,
> +	&isi_clk,
> +	&macb0_clk,
> +	&twi0_clk,
> +	&twi2_clk,
> +	&spi0_clk,
> +	&smd_clk,
> +	&ssc0_clk,
> +	&ssc1_clk,
> +	&sha_clk,
> +	&aes_clk,
> +	&tdes_clk,
> +};
> +
> +static struct clk pck0 = {
> +	.name		= "pck0",
> +	.pmc_mask	= AT91_PMC_PCK0,
> +	.type		= CLK_TYPE_PROGRAMMABLE,
> +	.id		= 0,
> +};
> +
> +static struct clk pck1 = {
> +	.name		= "pck1",
> +	.pmc_mask	= AT91_PMC_PCK1,
> +	.type		= CLK_TYPE_PROGRAMMABLE,
> +	.id		= 1,
> +};
> +
> +static struct clk pck2 = {
> +	.name		= "pck2",
> +	.pmc_mask	= AT91_PMC_PCK2,
> +	.type		= CLK_TYPE_PROGRAMMABLE,
> +	.id		= 2,
> +};
> +
> +static struct clk_lookup periph_clocks_lookups[] = {
> +	CLKDEV_CON_DEV_ID("macb_clk", "macb0", &macb0_clk),
> +	CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci0", &mmc0_clk),
> +	CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci1", &mmc1_clk),
> +	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi0", &spi0_clk),
> +	CLKDEV_DEV_ID("at91sam9x5-gpio0", &pioA_clk),
> +	CLKDEV_DEV_ID("at91sam9x5-gpio1", &pioB_clk),
> +	CLKDEV_DEV_ID("at91sam9x5-gpio2", &pioC_clk),
> +	CLKDEV_DEV_ID("at91sam9x5-gpio3", &pioD_clk),
> +	CLKDEV_DEV_ID("at91sam9x5-gpio4", &pioE_clk),

Why not using clkdev_add_physbase for the gpio clocks ?
This allow to use these clocks in device tree and non device context.

> +	CLKDEV_DEV_ID("at91-pit", &pit_clk),
> +	CLKDEV_CON_DEV_ID("hck1", "atmel_hlcdfb", &lcdc_clk),
> +};
> +
> +static struct clk_lookup usart_clocks_lookups[] = {
> +	CLKDEV_CON_DEV_ID("usart", "atmel_usart0", &mck),
> +	CLKDEV_CON_DEV_ID("usart", "atmel_usart1", &usart0_clk),
> +	CLKDEV_CON_DEV_ID("usart", "atmel_usart3", &usart2_clk),
> +	CLKDEV_CON_DEV_ID("usart", "atmel_usart4", &usart3_clk),
> +};
> +
> +static void __init sama5d4_register_clocks(void)
> +{
> +	int i;
> +
> +	for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
> +		clk_register(periph_clocks[i]);
> +
> +	clkdev_add_table(periph_clocks_lookups,
> +			 ARRAY_SIZE(periph_clocks_lookups));
> +
> +	clkdev_add_table(usart_clocks_lookups,
> +			 ARRAY_SIZE(usart_clocks_lookups));
> +
> +	clk_register(&pck0);
> +	clk_register(&pck1);
> +	clk_register(&pck2);
> +}
> +
> +/* --------------------------------------------------------------------
> + *  Processor initialization
> + * -------------------------------------------------------------------- */
> +static void sama5d4_initialize(void)
> +{
> +	/* Register the processor-specific clocks */
> +	sama5d4_register_clocks();
> +
> +	/* Register GPIO subsystem */
> +	at91_add_sam9x5_gpio(0, SAMA5D4_BASE_PIOA);
> +	at91_add_sam9x5_gpio(1, SAMA5D4_BASE_PIOB);
> +	at91_add_sam9x5_gpio(2, SAMA5D4_BASE_PIOC);
> +	at91_add_sam9x5_gpio(3, SAMA5D4_BASE_PIOD);
> +	at91_add_sam9x5_gpio(4, SAMA5D4_BASE_PIOE);
> +
> +	at91_add_pit(SAMA5D4_BASE_PIT);
> +	at91_add_sam9_smc(DEVICE_ID_SINGLE, SAMA5D4_BASE_HSMC + 0x600, 0xa0);
> +}
> +
> +AT91_SOC_START(sama5d4)
> +	.init = sama5d4_initialize,
> +AT91_SOC_END
> diff --git a/arch/arm/mach-at91/sama5d4_devices.c b/arch/arm/mach-at91/sama5d4_devices.c
> new file mode 100644
> index 0000000..3806971
> --- /dev/null
> +++ b/arch/arm/mach-at91/sama5d4_devices.c
> @@ -0,0 +1,495 @@
> +/*
> + *  On-Chip devices setup code for the SAMA5D4 family
> + *
> + *  Copyright (C) 2014 Atmel Corporation.
> + *		       Bo Shen <voice.shen@atmel.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +#include <common.h>
> +#include <init.h>
> +#include <sizes.h>
> +#include <gpio.h>
> +#include <asm/armlinux.h>
> +#include <mach/hardware.h>
> +#include <mach/board.h>
> +#include <mach/at91_pmc.h>
> +#include <mach/at91sam9x5_matrix.h>
> +#include <mach/at91sam9_ddrsdr.h>
> +#include <mach/iomux.h>
> +#include <mach/io.h>
> +#include <mach/cpu.h>
> +#include <i2c/i2c-gpio.h>
> +
> +#include "generic.h"
> +
> +void at91_add_device_sdram(u32 size)
> +{
> +	if (!size)
> +		size = at91sama5_get_ddram_size();
> +
> +	arm_add_mem_device("ram0", SAMA5_DDRCS, size);
> +	add_mem_device("sram0", SAMA5D4_SRAM_BASE,
> +		       SAMA5D4_SRAM_SIZE, IORESOURCE_MEM_WRITEABLE);
> +}
> +
> +/* --------------------------------------------------------------------
> + *  NAND / SmartMedia
> + * -------------------------------------------------------------------- */
> +#if defined(CONFIG_NAND_ATMEL)
> +static struct resource nand_resources[] = {
> +	[0] = {
> +		.start	= SAMA5D4_CHIPSELECT_3,
> +		.end	= SAMA5D4_CHIPSELECT_3 + SZ_128M - 1,
> +		.flags	= IORESOURCE_MEM,
> +	},
> +	[1] = {
> +		.start	= SAMA5D4_BASE_PMECC,
> +		.end	= SAMA5D4_BASE_PMECC + 0x490 - 1,
> +		.flags	= IORESOURCE_MEM,
> +	},
> +	[2] = {
> +		.start	= SAMA5D4_BASE_PMERRLOC,
> +		.end	= SAMA5D4_BASE_PMERRLOC + 0x100 - 1,
> +		.flags	= IORESOURCE_MEM,
> +	},
> +};
> +
> +void __init at91_add_device_nand(struct atmel_nand_data *data)
> +{
> +	if (!data)
> +		return;
> +
> +	at91_set_A_periph(AT91_PIN_PC5, 0);	/* D0 */
> +	at91_set_A_periph(AT91_PIN_PC6, 0);	/* D1 */
> +	at91_set_A_periph(AT91_PIN_PC7, 0);	/* D2 */
> +	at91_set_A_periph(AT91_PIN_PC8, 0);	/* D3 */
> +	at91_set_A_periph(AT91_PIN_PC9, 0);	/* D4 */
> +	at91_set_A_periph(AT91_PIN_PC10, 0);	/* D5 */
> +	at91_set_A_periph(AT91_PIN_PC11, 0);	/* D6 */
> +	at91_set_A_periph(AT91_PIN_PC12, 0);	/* D7 */
> +	at91_set_A_periph(AT91_PIN_PC13, 0);	/* RE */
> +	at91_set_A_periph(AT91_PIN_PC14, 0);	/* WE */
> +	at91_set_A_periph(AT91_PIN_PC15, 1);	/* NCS */
> +	at91_set_A_periph(AT91_PIN_PC16, 1);	/* RDY */
> +	at91_set_A_periph(AT91_PIN_PC17, 1);	/* ALE */
> +	at91_set_A_periph(AT91_PIN_PC18, 1);	/* CLE */
> +
> +	/* enable pin */
> +	if (gpio_is_valid(data->enable_pin))
> +		at91_set_gpio_output(data->enable_pin, 1);
> +
> +	/* ready/busy pin */
> +	if (gpio_is_valid(data->rdy_pin))
> +		at91_set_gpio_input(data->rdy_pin, 1);
> +
> +	/* card detect pin */
> +	if (gpio_is_valid(data->det_pin))
> +		at91_set_gpio_input(data->det_pin, 1);
> +
> +	add_generic_device_res("atmel_nand", 0, nand_resources,
> +			       ARRAY_SIZE(nand_resources), data);
> +}
> +#else
> +void __init at91_add_device_nand(struct atmel_nand_data *data) {}
> +#endif
> +
> +#if defined(CONFIG_DRIVER_NET_MACB)
> +void at91_add_device_eth(int id, struct macb_platform_data *data)
> +{
> +	if (!data)
> +		return;
> +
> +	switch (id) {
> +	case 0:
> +		at91_set_A_periph(AT91_PIN_PB16, 0);	/* GMDC */
> +		at91_set_A_periph(AT91_PIN_PB17, 0);	/* GMDIO */
> +
> +		at91_set_A_periph(AT91_PIN_PB0, 0);	/* GTXCK */
> +		at91_set_A_periph(AT91_PIN_PB2, 0);	/* GTXEN */
> +		at91_set_A_periph(AT91_PIN_PB6, 0);	/* GRXDV */
> +		at91_set_A_periph(AT91_PIN_PB7, 0);	/* GRXER */
> +
> +		switch (data->phy_interface) {
> +		case PHY_INTERFACE_MODE_MII:
> +			at91_set_A_periph(AT91_PIN_PB4, 0);	/* GCRS */
> +			at91_set_A_periph(AT91_PIN_PB5, 0);	/* GCOL */
> +			at91_set_A_periph(AT91_PIN_PB14, 0);	/* GTX2 */
> +			at91_set_A_periph(AT91_PIN_PB15, 0);	/* GTX3 */
> +			at91_set_A_periph(AT91_PIN_PB3, 0);	/* GTXER */
> +			at91_set_A_periph(AT91_PIN_PB1, 0);	/* GRXCK */
> +			at91_set_A_periph(AT91_PIN_PB10, 0);	/* GRX2 */
> +			at91_set_A_periph(AT91_PIN_PB11, 0);	/* GRX3 */
> +		case PHY_INTERFACE_MODE_RMII:
> +			at91_set_A_periph(AT91_PIN_PB12, 0);	/* GTX0 */
> +			at91_set_A_periph(AT91_PIN_PB13, 0);	/* GTX1 */
> +			at91_set_A_periph(AT91_PIN_PB8, 0);	/* GRX0 */
> +			at91_set_A_periph(AT91_PIN_PB9, 0);	/* GRX1 */
> +			break;
> +		default:
> +			return;
> +		}
> +
> +		add_generic_device("macb", id, NULL, SAMA5D4_BASE_GMAC0, SZ_16K,
> +			   IORESOURCE_MEM, data);
> +		break;
> +	case 1:
> +		at91_set_B_periph(AT91_PIN_PA22, 0);	/* GMDC */
> +		at91_set_B_periph(AT91_PIN_PA23, 0);	/* GMDIO */
> +
> +		at91_set_B_periph(AT91_PIN_PA2, 0);	/* GTXCK */
> +		at91_set_B_periph(AT91_PIN_PA4, 0);	/* GTXEN */
> +		at91_set_B_periph(AT91_PIN_PA10, 0);	/* GRXDV */
> +		at91_set_B_periph(AT91_PIN_PA11, 0);	/* GRXER */
> +
> +		switch (data->phy_interface) {
> +		case PHY_INTERFACE_MODE_MII:
> +			at91_set_B_periph(AT91_PIN_PA6, 0);	/* GCRS */
> +			at91_set_B_periph(AT91_PIN_PA9, 0);	/* GCOL */
> +			at91_set_B_periph(AT91_PIN_PA20, 0);	/* GTX2 */
> +			at91_set_B_periph(AT91_PIN_PA21, 0);	/* GTX3 */
> +			at91_set_B_periph(AT91_PIN_PA5, 0);	/* GTXER */
> +			at91_set_B_periph(AT91_PIN_PA3, 0);	/* GRXCK */
> +			at91_set_B_periph(AT91_PIN_PA18, 0);	/* GRX2 */
> +			at91_set_B_periph(AT91_PIN_PA19, 0);	/* GRX3 */
> +		case PHY_INTERFACE_MODE_RMII:
> +			at91_set_B_periph(AT91_PIN_PA12, 0);	/* GTX0 */
> +			at91_set_B_periph(AT91_PIN_PA13, 0);	/* GTX1 */
> +			at91_set_B_periph(AT91_PIN_PA8, 0);	/* GRX0 */
> +			at91_set_B_periph(AT91_PIN_PA9, 0);	/* GRX1 */
> +			break;
> +		default:
> +			return;
> +		}
> +
> +		add_generic_device("macb", id, NULL, SAMA5D4_BASE_GMAC1, SZ_16K,
> +			   IORESOURCE_MEM, data);
> +		break;
> +	default:
> +		return;
> +	}
> +
> +}
> +#else
> +void at91_add_device_eth(int id, struct macb_platform_data *data) {}
> +#endif
> +
> +#if defined(CONFIG_MCI_ATMEL)
> +void __init at91_add_device_mci(short mmc_id,
> +				struct atmel_mci_platform_data *data)
> +{
> +	resource_size_t start = ~0;
> +
> +	if (!data)
> +		return;
> +
> +	/* Must have at least one usable slot */
> +	if (!data->bus_width)
> +		return;
> +
> +	/* input/irq */
> +	if (gpio_is_valid(data->detect_pin)) {
> +		at91_set_gpio_input(data->detect_pin, 1);
> +		at91_set_deglitch(data->detect_pin, 1);
> +	}
> +
> +	if (gpio_is_valid(data->wp_pin))
> +		at91_set_gpio_input(data->wp_pin, 1);
> +
> +	switch (mmc_id) {
> +	/* MCI0 */
> +	case 0:
> +		start = SAMA5D4_BASE_HSMCI0;
> +
> +		/* CLK */
> +		at91_set_B_periph(AT91_PIN_PC4, 0);
> +
> +		/* CMD */
> +		at91_set_B_periph(AT91_PIN_PC5, 1);
> +
> +		/* DAT0, maybe DAT1..DAT3 */
> +		at91_set_B_periph(AT91_PIN_PC6, 1);
> +		switch (data->bus_width) {
> +		case 8:
> +			at91_set_B_periph(AT91_PIN_PC10, 1);
> +			at91_set_B_periph(AT91_PIN_PC11, 1);
> +			at91_set_B_periph(AT91_PIN_PC12, 1);
> +			at91_set_B_periph(AT91_PIN_PC13, 1);
> +		case 4:
> +			at91_set_B_periph(AT91_PIN_PC7, 1);
> +			at91_set_B_periph(AT91_PIN_PC8, 1);
> +			at91_set_B_periph(AT91_PIN_PC9, 1);
> +		};
> +
> +		break;
> +	/* MCI1 */
> +	case 1:
> +		start = SAMA5D4_BASE_HSMCI1;
> +
> +		/*
> +		 * As the mci1 io internal pull down is to strong,
> +		 * which cause external pull up doesn't work, so,
> +		 * disable internal pull down.
> +		 */
> +
> +		/* CLK */
> +		at91_set_C_periph(AT91_PIN_PE18, 0);
> +		at91_set_pulldown(AT91_PIN_PE18, 0);
> +
> +		/* CMD */
> +		at91_set_C_periph(AT91_PIN_PE19, 1);
> +		at91_set_pulldown(AT91_PIN_PE19, 0);
> +
> +		/* DAT0, maybe DAT1..DAT3 */
> +		at91_set_C_periph(AT91_PIN_PE20, 1);
> +		at91_set_pulldown(AT91_PIN_PE20, 0);
> +		if (data->bus_width == 4) {
> +			at91_set_C_periph(AT91_PIN_PE21, 1);
> +			at91_set_pulldown(AT91_PIN_PE21, 0);
> +			at91_set_C_periph(AT91_PIN_PE22, 1);
> +			at91_set_pulldown(AT91_PIN_PE22, 0);
> +			at91_set_C_periph(AT91_PIN_PE23, 1);
> +			at91_set_pulldown(AT91_PIN_PE23, 0);
> +		}
> +
> +		break;
> +	}
> +
> +	add_generic_device("atmel_mci", mmc_id, NULL, start, SZ_16K,
> +			   IORESOURCE_MEM, data);
> +}
> +#else
> +void __init at91_add_device_mci(short mmc_id,
> +				struct atmel_mci_platform_data *data) {}
> +#endif
> +
> +#if defined(CONFIG_I2C_GPIO)
> +static struct i2c_gpio_platform_data pdata_i2c[] = {
> +	{
> +		.sda_pin		= AT91_PIN_PA30,
> +		.sda_is_open_drain	= 1,
> +		.scl_pin		= AT91_PIN_PA31,
> +		.scl_is_open_drain	= 1,
> +		.udelay			= 5,		/* ~100 kHz */
> +	}, {
> +		.sda_pin		= AT91_PIN_PE29,
> +		.sda_is_open_drain	= 1,
> +		.scl_pin		= AT91_PIN_PE30,
> +		.scl_is_open_drain	= 1,
> +		.udelay			= 5,		/* ~100 kHz */
> +	}, {
> +		.sda_pin		= AT91_PIN_PB29,
> +		.sda_is_open_drain	= 1,
> +		.scl_pin		= AT91_PIN_PB30,
> +		.scl_is_open_drain	= 1,
> +		.udelay			= 5,		/* ~100 kHz */
> +	}, {
> +		.sda_pin		= AT91_PIN_PC25,
> +		.sda_is_open_drain	= 1,
> +		.scl_pin		= AT91_PIN_PC26,
> +		.scl_is_open_drain	= 1,
> +		.udelay			= 5,		/* ~100 kHz */
> +	}
> +};
> +
> +void at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices,
> +			 int nr_devices)
> +{
> +	struct i2c_gpio_platform_data *pdata;
> +
> +	if (i2c_id > ARRAY_SIZE(pdata_i2c))
> +		return;
> +
> +	i2c_register_board_info(i2c_id, devices, nr_devices);
> +
> +	pdata = &pdata_i2c[i2c_id];
> +
> +	at91_set_GPIO_periph(pdata->sda_pin, 1);		/* TWD (SDA) */
> +	at91_set_multi_drive(pdata->sda_pin, 1);
> +
> +	at91_set_GPIO_periph(pdata->scl_pin, 1);		/* TWCK (SCL) */
> +	at91_set_multi_drive(pdata->scl_pin, 1);
> +
> +	add_generic_device_res("i2c-gpio", i2c_id, NULL, 0, pdata);
> +}
> +#else
> +void at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices,
> +			 int nr_devices) {}
> +#endif

Maybe we can use the new atmel i2c driver, no ?

> +
> +/* --------------------------------------------------------------------
> + *  SPI
> + * -------------------------------------------------------------------- */
> +#if defined(CONFIG_DRIVER_SPI_ATMEL)
> +static unsigned spi0_standard_cs[2] = { AT91_PIN_PC3, AT91_PIN_PC4 };
> +static unsigned spi1_standard_cs[2] = { AT91_PIN_PB21, AT91_PIN_PB22 };
> +
> +static struct at91_spi_platform_data spi_pdata[] = {
> +	[0] = {
> +		.chipselect = spi0_standard_cs,
> +		.num_chipselect = ARRAY_SIZE(spi0_standard_cs),
> +	},
> +	[1] = {
> +		.chipselect = spi1_standard_cs,
> +		.num_chipselect = ARRAY_SIZE(spi1_standard_cs),
> +	},
> +};
> +
> +void at91_add_device_spi(int spi_id, struct at91_spi_platform_data *pdata)
> +{
> +	int i;
> +	int cs_pin;
> +	resource_size_t start = ~0;
> +
> +	BUG_ON(spi_id > 1);
> +
> +	if (!pdata)
> +		pdata = &spi_pdata[spi_id];
> +
> +	for (i = 0; i < pdata->num_chipselect; i++) {
> +		cs_pin = pdata->chipselect[i];
> +
> +		/* enable chip-select pin */
> +		if (gpio_is_valid(cs_pin))
> +			at91_set_gpio_output(cs_pin, 1);
> +	}
> +
> +	/* Configure SPI bus(es) */
> +	switch (spi_id) {
> +	case 0:
> +		start = SAMA5D4_BASE_SPI0;
> +		at91_set_A_periph(AT91_PIN_PC0, 0);	/* SPI0_MISO */
> +		at91_set_A_periph(AT91_PIN_PC1, 0);	/* SPI0_MOSI */
> +		at91_set_A_periph(AT91_PIN_PC2, 0);	/* SPI0_SPCK */
> +		break;
> +	case 1:
> +		start = SAMA5D4_BASE_SPI1;
> +		at91_set_A_periph(AT91_PIN_PB18, 0);	/* SPI1_MISO */
> +		at91_set_A_periph(AT91_PIN_PB19, 0);	/* SPI1_MOSI */
> +		at91_set_A_periph(AT91_PIN_PB20, 0);	/* SPI1_SPCK */
> +		break;
> +	}
> +
> +	add_generic_device("atmel_spi", spi_id, NULL, start, SZ_16K,
> +			   IORESOURCE_MEM, pdata);
> +}
> +#else
> +void at91_add_device_spi(int spi_id, struct at91_spi_platform_data *pdata) {}
> +#endif
> +
> +/* --------------------------------------------------------------------
> + *  LCD Controller
> + * -------------------------------------------------------------------- */
> +#if defined(CONFIG_DRIVER_VIDEO_ATMEL_HLCD)
> +void __init at91_add_device_lcdc(struct atmel_lcdfb_platform_data *data)
> +{
> +	BUG_ON(!data);
> +
> +	at91_set_A_periph(AT91_PIN_PA24, 0);	/* LCDPWM */
> +	at91_set_A_periph(AT91_PIN_PA25, 0);	/* LCDDISP */
> +	at91_set_A_periph(AT91_PIN_PA26, 0);	/* LCDVSYNC */
> +	at91_set_A_periph(AT91_PIN_PA27, 0);	/* LCDHSYNC */
> +	at91_set_A_periph(AT91_PIN_PA28, 0);	/* LCDDOTCK */
> +	at91_set_A_periph(AT91_PIN_PA29, 0);	/* LCDDEN */
> +
> +	at91_set_A_periph(AT91_PIN_PA2, 0);	/* LCDD2 */
> +	at91_set_A_periph(AT91_PIN_PA3, 0);	/* LCDD3 */
> +	at91_set_A_periph(AT91_PIN_PA4, 0);	/* LCDD4 */
> +	at91_set_A_periph(AT91_PIN_PA5, 0);	/* LCDD5 */
> +	at91_set_A_periph(AT91_PIN_PA6, 0);	/* LCDD6 */
> +	at91_set_A_periph(AT91_PIN_PA7, 0);	/* LCDD7 */
> +
> +	at91_set_A_periph(AT91_PIN_PA10, 0);	/* LCDD10 */
> +	at91_set_A_periph(AT91_PIN_PA11, 0);	/* LCDD11 */
> +	at91_set_A_periph(AT91_PIN_PA12, 0);	/* LCDD12 */
> +	at91_set_A_periph(AT91_PIN_PA13, 0);	/* LCDD13 */
> +	at91_set_A_periph(AT91_PIN_PA14, 0);	/* LCDD14 */
> +	at91_set_A_periph(AT91_PIN_PA15, 0);	/* LCDD15 */
> +
> +	at91_set_A_periph(AT91_PIN_PA18, 0);	/* LCDD18 */
> +	at91_set_A_periph(AT91_PIN_PA19, 0);	/* LCDD19 */
> +	at91_set_A_periph(AT91_PIN_PA20, 0);	/* LCDD20 */
> +	at91_set_A_periph(AT91_PIN_PA21, 0);	/* LCDD21 */
> +	at91_set_A_periph(AT91_PIN_PA22, 0);	/* LCDD22 */
> +	at91_set_A_periph(AT91_PIN_PA23, 0);	/* LCDD23 */
> +
> +	add_generic_device("atmel_hlcdfb", DEVICE_ID_SINGLE, NULL,
> +			   SAMA5D4_BASE_LCDC, SZ_4K, IORESOURCE_MEM, data);
> +}
> +#else
> +void __init at91_add_device_lcdc(struct atmel_lcdfb_platform_data *data) {}
> +#endif
> +
> +/* --------------------------------------------------------------------
> + *  UART
> + * -------------------------------------------------------------------- */
> +#if defined(CONFIG_DRIVER_SERIAL_ATMEL)
> +resource_size_t __init at91_configure_dbgu(void)
> +{
> +	at91_set_A_periph(AT91_PIN_PB25, 1);		/* TXD1 */
> +	at91_set_A_periph(AT91_PIN_PB24, 0);		/* RXD1 */
> +
> +	return SAMA5D4_BASE_DBGU;
> +}
> +
> +resource_size_t __init at91_configure_usart0(unsigned pins)
> +{
> +	at91_set_A_periph(AT91_PIN_PD13, 1);		/* TXD1 */
> +	at91_set_A_periph(AT91_PIN_PD12, 0);		/* RXD1 */
> +
> +	return SAMA5D4_BASE_USART0;
> +}
> +
> +resource_size_t __init at91_configure_usart1(unsigned pins)
> +{
> +	at91_set_A_periph(AT91_PIN_PD17, 1);		/* TXD1 */
> +	at91_set_A_periph(AT91_PIN_PD16, 0);		/* RXD1 */
> +
> +	return SAMA5D4_BASE_USART1;
> +}
> +
> +
> +resource_size_t __init at91_configure_usart2(unsigned pins)
> +{
> +	at91_set_B_periph(AT91_PIN_PB5, 1);		/* TXD1 */
> +	at91_set_B_periph(AT91_PIN_PB4, 0);		/* RXD1 */
> +
> +	return SAMA5D4_BASE_USART2;
> +}
> +
> +resource_size_t __init at91_configure_usart3(unsigned pins)
> +{
> +	at91_set_B_periph(AT91_PIN_PE17, 1);		/* TXD1 */
> +	at91_set_B_periph(AT91_PIN_PE16, 0);		/* RXD1 */
> +
> +	return SAMA5D4_BASE_USART3;
> +}
> +
> +resource_size_t __init at91_configure_usart4(unsigned pins)
> +{
> +	at91_set_B_periph(AT91_PIN_PE27, 1);		/* TXD1 */
> +	at91_set_B_periph(AT91_PIN_PE26, 0);		/* RXD1 */
> +
> +	return SAMA5D4_BASE_USART4;
> +}
> +
> +resource_size_t __init at91_configure_usart5(unsigned pins)
> +{
> +	at91_set_B_periph(AT91_PIN_PE30, 1);		/* TXD1 */
> +	at91_set_B_periph(AT91_PIN_PE29, 0);		/* RXD1 */
> +
> +	return SAMA5D4_BASE_UART0;
> +}
> +
> +resource_size_t __init at91_configure_usart6(unsigned pins)
> +{
> +	at91_set_C_periph(AT91_PIN_PC26, 1);		/* TXD1 */
> +	at91_set_C_periph(AT91_PIN_PC25, 0);		/* RXD1 */
> +
> +	return SAMA5D4_BASE_UART1;
> +}
> +#endif
> -- 
> 2.1.0.24.g4109c28
> 
> 
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox

Thanks,

Raphaël Poggi

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2014-09-17 18:38 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-09-17 10:21 [PATCH 0/9] ARM: at91: add sama5d4ek board support Bo Shen
2014-09-17 10:21 ` [PATCH 1/9] ARM: at91: move pmc base address into soc header Bo Shen
2014-09-17 10:21 ` [PATCH 2/9] ARM: atmel: sama5d3 is a family member of sama5 Bo Shen
2014-09-17 10:21 ` [PATCH 3/9] ARM: at91: clock: use cpu_has_pcr for pcr1 checking Bo Shen
2014-09-17 10:21 ` [PATCH 4/9] nand: atmel: runtime to generate galois table Bo Shen
2014-09-17 10:21 ` [PATCH 5/9] net: macb: using default value for FBLDO Bo Shen
2014-09-22  4:59   ` Sascha Hauer
2014-09-22  5:08     ` Bo Shen
2014-09-17 10:21 ` [PATCH 6/9] mci: atmel: add new ip version 0x600 support Bo Shen
2014-09-17 10:21 ` [PATCH 7/9] ARM: at91: add sama5d4 soc support #1 Bo Shen
2014-09-18  6:10   ` Sascha Hauer
2014-09-23  3:02     ` Bo Shen
2014-09-23  7:54       ` Sascha Hauer
2014-09-17 10:21 ` [PATCH 8/9] ARM: at91: add sama5d4 soc support #2 Bo Shen
2014-09-13 20:12   ` Raphaël Poggi [this message]
2014-09-18  1:43     ` Bo Shen
2014-09-17 10:21 ` [PATCH 9/9] ARM: at91: add sama5d4ek board support Bo Shen
2014-09-22  5:02 ` [PATCH 0/9] " Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140913201231.GB22947@gmail.com \
    --to=raphio98@gmail.com \
    --cc=barebox@lists.infradead.org \
    --cc=voice.shen@atmel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox