From: Sascha Hauer <s.hauer@pengutronix.de>
To: Christian Hemp <c.hemp@phytec.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH 1/4] phy/micrel: disable Asym_Pause support
Date: Wed, 17 Sep 2014 08:55:12 +0200 [thread overview]
Message-ID: <20140917065512.GN4992@pengutronix.de> (raw)
In-Reply-To: <1410785791-27053-1-git-send-email-c.hemp@phytec.de>
On Mon, Sep 15, 2014 at 02:56:28PM +0200, Christian Hemp wrote:
> From: Jan Weitzel <j.weitzel@phytec.de>
>
> With SUPPORTED_Asym_Pause enabled we need to hotplug the ethernet cable.
> So disable it like done with PHY_ID_KSZ9021.
>
> Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
> Signed-off-by: Christian Hemp <c.hemp@phytec.de>
Applied all, thanks
Sascha
> ---
> drivers/net/phy/micrel.c | 4 ++--
> 1 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
> index 8aea653..88c64e5 100644
> --- a/drivers/net/phy/micrel.c
> +++ b/drivers/net/phy/micrel.c
> @@ -254,11 +254,11 @@ static struct phy_driver ksphy_driver[] = {
> .config_aneg = genphy_config_aneg,
> .read_status = genphy_read_status,
> }, {
> + /* I saw the same issue like PHY_ID_KSZ9021 for Asym_Pause */
> .phy_id = PHY_ID_KSZ9031,
> .phy_id_mask = 0x00fffff0,
> .drv.name = "Micrel KSZ9031 Gigabit PHY",
> - .features = (PHY_GBIT_FEATURES | SUPPORTED_Pause
> - | SUPPORTED_Asym_Pause),
> + .features = (PHY_GBIT_FEATURES | SUPPORTED_Pause),
> .config_init = kszphy_config_init,
> .config_aneg = genphy_config_aneg,
> .read_status = genphy_read_status,
> --
> 1.7.0.4
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
prev parent reply other threads:[~2014-09-17 6:55 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-15 12:56 Christian Hemp
2014-09-15 12:56 ` [PATCH 2/4] ARM:phyFLEX-iMX6: Remove eth phy reset form board Christian Hemp
2014-09-15 12:56 ` [PATCH 3/4] ARM:phyFLEX-iMX6: Remove mmd_write_reg from board Christian Hemp
2014-09-15 12:56 ` [PATCH 4/4] ARM:phyFLEX-iMX6 New Ram Timings for Q/DL Christian Hemp
2014-09-17 6:55 ` Sascha Hauer [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140917065512.GN4992@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=c.hemp@phytec.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox