mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH v2 0/4] KaRo TX6u support
Date: Fri, 19 Sep 2014 07:45:18 +0200	[thread overview]
Message-ID: <20140919054518.GC4992@pengutronix.de> (raw)
In-Reply-To: <1410949512-16562-1-git-send-email-s.trumtrar@pengutronix.de>

On Wed, Sep 17, 2014 at 12:25:08PM +0200, Steffen Trumtrar wrote:
> Hi!
> 
> Changes since v1:
> 
> 	- removed clocks.imxcfg -> actually not needed
> 	- removed magic values in flash-header-tx6dl-1g -> not needed
> 	- removed barebox-usdhc-environment
> 	- include imx6qdl.dtsi for pwm aliases
> 
> Regards,
> Steffen

Applied, thanks

Sascha

> 
> Sascha Hauer (2):
>   imx-usb-loader: Skip unknown tags
>   imx-image: Handle check commands correctly
> 
> Steffen Trumtrar (2):
>   arm: mach-imx: add more ddr register defines
>   ARM: i.MX6: add support for Karo TX6X family
> 
>  Documentation/boards/imx/Karo-TX6                  |  13 ++
>  arch/arm/boards/Makefile                           |   1 +
>  arch/arm/boards/karo-tx6x/1600mhz_4x128mx16.imxcfg | 101 +++++++++++
>  arch/arm/boards/karo-tx6x/Makefile                 |   2 +
>  arch/arm/boards/karo-tx6x/board.c                  | 202 +++++++++++++++++++++
>  .../boards/karo-tx6x/flash-header-tx6dl-1g.imxcfg  |  11 ++
>  arch/arm/boards/karo-tx6x/lowlevel.c               |  75 ++++++++
>  arch/arm/boards/karo-tx6x/ram-base.imxcfg          |  71 ++++++++
>  arch/arm/dts/Makefile                              |   1 +
>  arch/arm/dts/imx6dl-tx6u-801x.dts                  |  65 +++++++
>  arch/arm/mach-imx/Kconfig                          |   4 +
>  arch/arm/mach-imx/include/mach/imx6-ddr-regs.h     |   6 +
>  arch/arm/mach-imx/include/mach/imx6dl-ddr-regs.h   |  20 ++
>  images/Makefile.imx                                |   5 +
>  scripts/imx/imx-image.c                            |  36 ++--
>  scripts/imx/imx-usb-loader.c                       |   6 +-
>  16 files changed, 596 insertions(+), 23 deletions(-)
>  create mode 100644 Documentation/boards/imx/Karo-TX6
>  create mode 100644 arch/arm/boards/karo-tx6x/1600mhz_4x128mx16.imxcfg
>  create mode 100644 arch/arm/boards/karo-tx6x/Makefile
>  create mode 100644 arch/arm/boards/karo-tx6x/board.c
>  create mode 100644 arch/arm/boards/karo-tx6x/flash-header-tx6dl-1g.imxcfg
>  create mode 100644 arch/arm/boards/karo-tx6x/lowlevel.c
>  create mode 100644 arch/arm/boards/karo-tx6x/ram-base.imxcfg
>  create mode 100644 arch/arm/dts/imx6dl-tx6u-801x.dts
> 
> -- 
> 2.1.0
> 
> 
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

      parent reply	other threads:[~2014-09-19  5:45 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-09-17 10:25 Steffen Trumtrar
2014-09-17 10:25 ` [PATCH v2 1/4] imx-usb-loader: Skip unknown tags Steffen Trumtrar
2014-09-17 10:25 ` [PATCH v2 2/4] imx-image: Handle check commands correctly Steffen Trumtrar
2014-09-17 10:25 ` [PATCH v2 3/4] arm: mach-imx: add more ddr register defines Steffen Trumtrar
2014-09-17 10:25 ` [PATCH v2 4/4] ARM: i.MX6: add support for Karo TX6X family Steffen Trumtrar
2014-09-19  5:45 ` Sascha Hauer [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140919054518.GC4992@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=s.trumtrar@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox