From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:6f8:1178:4:290:27ff:fe1d:cc33]) by bombadil.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1XgXA7-0002C4-3Y for barebox@lists.infradead.org; Tue, 21 Oct 2014 10:59:35 +0000 Date: Tue, 21 Oct 2014 12:59:10 +0200 From: Sascha Hauer Message-ID: <20141021105910.GM14443@pengutronix.de> References: <1413463940-9651-1-git-send-email-voytikd@gmail.com> MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: <1413463940-9651-1-git-send-email-voytikd@gmail.com> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: [PATCH] usb: ehci-hcd: Correct CLEAR_FEATURE code To: Dmitry Voytik Cc: barebox@lists.infradead.org On Thu, Oct 16, 2014 at 04:52:20PM +0400, Dmitry Voytik wrote: > This commit broke USB on olinuxino board: > > 87b9bea USB: host: hub: Use usb_hub_power_on from U-Boot > > This patch was ported from U-Boot with small changes. See discussion: > http://lists.denx.de/pipermail/u-boot/2013-May/153920.html > > The root cause seems to be a missing mask and missing 'break' in > ehci-hcd.c. Fix both. > > Signed-off-by: Dmitry Voytik Applied, thanks Sascha > --- > drivers/usb/host/ehci-hcd.c | 10 ++++++---- > 1 file changed, 6 insertions(+), 4 deletions(-) > > diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c > index 5624552..d2e1296 100644 > --- a/drivers/usb/host/ehci-hcd.c > +++ b/drivers/usb/host/ehci-hcd.c > @@ -675,21 +675,23 @@ ehci_submit_root(struct usb_device *dev, unsigned long pipe, void *buffer, > break; > case USB_REQ_CLEAR_FEATURE | ((USB_DIR_OUT | USB_RT_PORT) << 8): > reg = ehci_readl(status_reg); > + reg &= ~EHCI_PS_CLEAR; > switch (le16_to_cpu(req->value)) { > case USB_PORT_FEAT_ENABLE: > reg &= ~EHCI_PS_PE; > break; > case USB_PORT_FEAT_C_ENABLE: > - reg = (reg & ~EHCI_PS_CLEAR) | EHCI_PS_PE; > + reg |= EHCI_PS_PEC; > break; > case USB_PORT_FEAT_POWER: > if (HCS_PPC(ehci_readl(&ehci->hccr->cr_hcsparams))) > - reg = reg & ~(EHCI_PS_CLEAR | EHCI_PS_PP); > + reg &= ~ EHCI_PS_PP; > + break; > case USB_PORT_FEAT_C_CONNECTION: > - reg = (reg & ~EHCI_PS_CLEAR) | EHCI_PS_CSC; > + reg |= EHCI_PS_CSC; > break; > case USB_PORT_FEAT_OVER_CURRENT: > - reg = (reg & ~EHCI_PS_CLEAR) | EHCI_PS_OCC; > + reg |= EHCI_PS_OCC; > break; > case USB_PORT_FEAT_C_RESET: > ehci->portreset &= ~(1 << le16_to_cpu(req->index)); > -- > 1.9.1 > > -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox