mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: barebox@lists.infradead.org
Subject: Re: [RFC, PATCH] i.MX: Add provisions to boot from IRAM
Date: Mon, 4 May 2015 09:14:39 +0200	[thread overview]
Message-ID: <20150504071439.GL6325@pengutronix.de> (raw)
In-Reply-To: <1430619980-26243-1-git-send-email-andrew.smirnov@gmail.com>

Hi Andrey,

This series contains very nice cleanups. It needs some polishing, but
the patches are very welcomed.

On Sat, May 02, 2015 at 07:26:12PM -0700, Andrey Smirnov wrote:
> This commit add a very basic code to allow Barebox to be booted from
> IRAM. Given that the amount of IRAM on most i.MX variants is
> insufficient to contain a copy of Barebox with any reasonable degree
> of functionality this code uses IRAM only as a temporary location and
> eventually bootstraps from DRAM. But the presense of the intermediate
> IRAM-only stage allows to add provisions to test the area of DRAM that
> Barebox would be using to facilitate various testing scenarious.
> 
> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
> ---
>  arch/arm/boards/freescale-mx51-babbage/Makefile    |  3 ++
>  .../flash-header-imx51-babbage-xload.imxcfg        | 59 ++++++++++++++++++++++
>  arch/arm/boards/freescale-mx51-babbage/lowlevel.c  | 25 +++++++++
>  arch/arm/configs/imx_v7-xload_defconfig            | 46 +++++++++++++++++
>  arch/arm/mach-imx/Kconfig                          | 15 ++++++
>  arch/arm/mach-imx/Makefile                         |  1 +
>  arch/arm/mach-imx/xload.c                          | 54 ++++++++++++++++++++
>  images/Makefile.imx                                | 20 +++++++-
>  8 files changed, 222 insertions(+), 1 deletion(-)
>  create mode 100644 arch/arm/boards/freescale-mx51-babbage/flash-header-imx51-babbage-xload.imxcfg
>  create mode 100644 arch/arm/configs/imx_v7-xload_defconfig
>  create mode 100644 arch/arm/mach-imx/xload.c
> 
> diff --git a/arch/arm/boards/freescale-mx51-babbage/Makefile b/arch/arm/boards/freescale-mx51-babbage/Makefile
> index 6252c88..31b8fcd 100644
> --- a/arch/arm/boards/freescale-mx51-babbage/Makefile
> +++ b/arch/arm/boards/freescale-mx51-babbage/Makefile
> @@ -1,3 +1,6 @@
>  obj-y += board.o flash-header-imx51-babbage.dcd.o
>  extra-y += flash-header-imx51-babbage.dcd.S flash-header-imx51-babbage.dcd
>  lwl-y += lowlevel.o
> +
> +obj-$(CONFIG_ARCH_IMX_XLOAD) += flash-header-imx51-babbage-xload.dcd.o
> +extra-$(CONFIG_ARCH_IMX_XLOAD) += flash-header-imx51-babbage-xload.dcd.S flash-header-imx51-babbage-xload.dcd
> diff --git a/arch/arm/boards/freescale-mx51-babbage/flash-header-imx51-babbage-xload.imxcfg b/arch/arm/boards/freescale-mx51-babbage/flash-header-imx51-babbage-xload.imxcfg
> new file mode 100644
> index 0000000..a04ac75
> --- /dev/null
> +++ b/arch/arm/boards/freescale-mx51-babbage/flash-header-imx51-babbage-xload.imxcfg
> @@ -0,0 +1,59 @@
> +loadaddr CONFIG_ARCH_IMX_UNUSED_IRAM_BASE
> +soc imx51
> +dcdofs 0x400
> +wm 32 0x73fa88a0 0x00000200

Can't this and the rest of this file shared with the regular imxcfg
file?

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

      parent reply	other threads:[~2015-05-04  7:15 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-05-03  2:26 Andrey Smirnov
2015-05-03  2:26 ` [PATCH 1/8] i.MX: Move UART definitions into a separate file Andrey Smirnov
2015-05-04  7:08   ` Sascha Hauer
2015-05-03  2:26 ` [PATCH 2/8] i.MX: serial: Add constants for UART clock divisor Andrey Smirnov
2015-05-03  2:26 ` [PATCH 3/8] i.MX: serial: Add baud rate calculation convenience functions Andrey Smirnov
2015-05-03  2:26 ` [PATCH 4/8] i.MX51: babbage: Implement CONFIG_DEBUG_LL Andrey Smirnov
2015-05-04  6:43   ` Sascha Hauer
2015-05-03  2:26 ` [PATCH 5/8] i.MX: serial: Add setup_uart_ll function Andrey Smirnov
2015-05-04  6:53   ` Sascha Hauer
2015-05-03  2:26 ` [PATCH 6/8] i.MX: serial: Convert i.MX51 and i.MX6 to use 'setup_uart_ll' Andrey Smirnov
2015-05-04  6:57   ` Sascha Hauer
2015-05-03  2:26 ` [PATCH 7/8] i.MX: serial: Distil common clock ungating code Andrey Smirnov
2015-05-04  7:01   ` Sascha Hauer
2015-05-04 18:04     ` Andrey Smirnov
2015-05-04 19:52       ` Sascha Hauer
2015-05-03  2:26 ` [PATCH 8/8] Makefile.lib: Make 'check_file_size' more flexible Andrey Smirnov
2015-05-04  7:14 ` Sascha Hauer [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150504071439.GL6325@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=andrew.smirnov@gmail.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox