* [PATCH 1/2] ARM: pfla02: align with and include mainline DT
@ 2015-08-18 9:02 Philipp Zabel
2015-08-18 9:02 ` [PATCH 2/2] ARM: pbab01: " Philipp Zabel
2015-08-19 13:39 ` [PATCH 1/2] ARM: pfla02: " Sascha Hauer
0 siblings, 2 replies; 3+ messages in thread
From: Philipp Zabel @ 2015-08-18 9:02 UTC (permalink / raw)
To: barebox
Align with the mainline device tree, include it,
and remove all unchanged nodes and properties.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
---
arch/arm/dts/imx6dl-phytec-pfla02.dtsi | 4 -
arch/arm/dts/imx6q-phytec-pfla02.dtsi | 4 -
arch/arm/dts/imx6qdl-phytec-pfla02.dtsi | 136 +++-----------------------------
3 files changed, 11 insertions(+), 133 deletions(-)
diff --git a/arch/arm/dts/imx6dl-phytec-pfla02.dtsi b/arch/arm/dts/imx6dl-phytec-pfla02.dtsi
index 0f801ae..47154d5 100644
--- a/arch/arm/dts/imx6dl-phytec-pfla02.dtsi
+++ b/arch/arm/dts/imx6dl-phytec-pfla02.dtsi
@@ -16,7 +16,3 @@
model = "Phytec phyFLEX-i.MX6 Dual Lite";
compatible = "phytec,imx6dl-pfla02", "fsl,imx6dl";
};
-
-&ecspi3 {
- status = "okay";
-};
diff --git a/arch/arm/dts/imx6q-phytec-pfla02.dtsi b/arch/arm/dts/imx6q-phytec-pfla02.dtsi
index 0aec5d0..e8afe7a 100644
--- a/arch/arm/dts/imx6q-phytec-pfla02.dtsi
+++ b/arch/arm/dts/imx6q-phytec-pfla02.dtsi
@@ -16,7 +16,3 @@
model = "Phytec phyFLEX-i.MX6 Quad";
compatible = "phytec,imx6q-pfla02", "fsl,imx6q";
};
-
-&ecspi3 {
- status = "okay";
-};
diff --git a/arch/arm/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/dts/imx6qdl-phytec-pfla02.dtsi
index 5ac0ef9..63c1e7f 100644
--- a/arch/arm/dts/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/dts/imx6qdl-phytec-pfla02.dtsi
@@ -9,7 +9,14 @@
* http://www.gnu.org/copyleft/gpl.html
*/
+#include <arm/imx6qdl-phytec-pfla02.dtsi>
+
/ {
+ memory {
+ /* let barebox fill the memory node */
+ reg = <0 0>;
+ };
+
chosen {
environment-nand {
compatible = "barebox,environment";
@@ -50,17 +57,7 @@
};
&ecspi3 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_ecspi3>;
- status = "disabled";
- fsl,spi-num-chipselects = <1>;
- cs-gpios = <&gpio4 24 0>;
-
- flash: m25p80@0 {
- compatible = "m25p80";
- spi-max-frequency = <20000000>;
- reg = <0>;
-
+ flash: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
@@ -87,12 +84,7 @@
};
&fec {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_enet>;
phy-handle = <ðphy>;
- phy-mode = "rgmii";
- phy-reset-gpios = <&gpio3 23 0>;
- status = "disabled";
mdio {
#address-cells = <1>;
@@ -108,10 +100,6 @@
};
&gpmi {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_gpmi_nand>;
- nand-on-flash-bbt;
- status = "okay";
#address-cells = <1>;
#size-cells = <1>;
@@ -142,45 +130,8 @@
};
&iomuxc {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_hog>;
-
- ecspi3 {
- pinctrl_ecspi3: ecspi3grp {
- fsl,pins = <
- MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1
- MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1
- MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1
- MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000 /* SPI NOR chipselect */
- >;
- };
- };
-
- enet {
- pinctrl_enet: enetgrp {
- fsl,pins = <
- MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
- MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
- MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
- MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
- MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
- MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
- MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
- MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
- MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
- MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
- MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
- MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
- MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
- MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
- MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
- MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0
- >;
- };
- };
-
- gpmi-nand {
- pinctrl_gpmi_nand: gpmi-nand {
+ imx6q-phytec-pfla02 {
+ pinctrl_gpmi_nand: gpminandgrp {
fsl,pins = <
MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
@@ -204,79 +155,13 @@
>;
};
};
-
- hog {
- pinctrl_hog: hoggrp {
- fsl,pins = <
- MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x80000000
- MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x80000000
- >;
- };
- };
-
- uart4 {
- pinctrl_uart4: uart4grp {
- fsl,pins = <
- MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
- MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
- >;
- };
- };
-
- usdhc2 {
- pinctrl_usdhc2: usdhc2grp {
- fsl,pins = <
- MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
- MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
- MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
- MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
- MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
- MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
- >;
- };
- };
-
- usdhc3 {
- pinctrl_usdhc3: usdhc3grp {
- fsl,pins = <
- MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
- MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
- MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
- MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
- MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
- MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
- MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x80000000
- MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000
- >;
- };
- };
};
&ocotp {
barebox,provide-mac-address = <&fec 0x620>;
};
-&uart4 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart4>;
- status = "disabled";
-};
-
-&usdhc2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc2>;
- cd-gpios = <&gpio1 4 0>;
- wp-gpios = <&gpio1 2 0>;
- status = "disabled";
-};
-
&usdhc3 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc3>;
- cd-gpios = <&gpio1 27 0>;
- wp-gpios = <&gpio1 29 0>;
- status = "disabled";
-
#address-cells = <1>;
#size-cells = <1>;
@@ -284,6 +169,7 @@
label = "barebox";
reg = <0x0 0x80000>;
};
+
partition@1 {
label = "barebox-environment";
reg = <0x80000 0x80000>;
--
2.4.6
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 3+ messages in thread* [PATCH 2/2] ARM: pbab01: align with and include mainline DT
2015-08-18 9:02 [PATCH 1/2] ARM: pfla02: align with and include mainline DT Philipp Zabel
@ 2015-08-18 9:02 ` Philipp Zabel
2015-08-19 13:39 ` [PATCH 1/2] ARM: pfla02: " Sascha Hauer
1 sibling, 0 replies; 3+ messages in thread
From: Philipp Zabel @ 2015-08-18 9:02 UTC (permalink / raw)
To: barebox
Align with the mainline device tree, include it,
and remove all unchanged nodes and properties.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
---
arch/arm/dts/imx6q-phytec-pbab01.dts | 4 ----
arch/arm/dts/imx6qdl-phytec-pbab01.dtsi | 16 +---------------
2 files changed, 1 insertion(+), 19 deletions(-)
diff --git a/arch/arm/dts/imx6q-phytec-pbab01.dts b/arch/arm/dts/imx6q-phytec-pbab01.dts
index 580338d..2f816dd 100644
--- a/arch/arm/dts/imx6q-phytec-pbab01.dts
+++ b/arch/arm/dts/imx6q-phytec-pbab01.dts
@@ -16,8 +16,4 @@
/ {
model = "Phytec phyFLEX-i.MX6 Quad Carrier-Board";
compatible = "phytec,imx6x-pbab01", "phytec,imx6q-pfla02", "fsl,imx6q";
-
- chosen {
- linux,stdout-path = &uart4;
- };
};
diff --git a/arch/arm/dts/imx6qdl-phytec-pbab01.dtsi b/arch/arm/dts/imx6qdl-phytec-pbab01.dtsi
index 157e130..86ab991 100644
--- a/arch/arm/dts/imx6qdl-phytec-pbab01.dtsi
+++ b/arch/arm/dts/imx6qdl-phytec-pbab01.dtsi
@@ -9,22 +9,8 @@
* http://www.gnu.org/copyleft/gpl.html
*/
-&fec {
- status = "okay";
-};
+#include <arm/imx6qdl-phytec-pbab01.dtsi>
&uart1 {
status = "okay";
};
-
-&uart4 {
- status = "okay";
-};
-
-&usdhc2 {
- status = "okay";
-};
-
-&usdhc3 {
- status = "okay";
-};
--
2.4.6
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [PATCH 1/2] ARM: pfla02: align with and include mainline DT
2015-08-18 9:02 [PATCH 1/2] ARM: pfla02: align with and include mainline DT Philipp Zabel
2015-08-18 9:02 ` [PATCH 2/2] ARM: pbab01: " Philipp Zabel
@ 2015-08-19 13:39 ` Sascha Hauer
1 sibling, 0 replies; 3+ messages in thread
From: Sascha Hauer @ 2015-08-19 13:39 UTC (permalink / raw)
To: Philipp Zabel; +Cc: barebox
On Tue, Aug 18, 2015 at 11:02:40AM +0200, Philipp Zabel wrote:
> Align with the mainline device tree, include it,
> and remove all unchanged nodes and properties.
>
> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
> ---
> arch/arm/dts/imx6dl-phytec-pfla02.dtsi | 4 -
> arch/arm/dts/imx6q-phytec-pfla02.dtsi | 4 -
> arch/arm/dts/imx6qdl-phytec-pfla02.dtsi | 136 +++-----------------------------
> 3 files changed, 11 insertions(+), 133 deletions(-)
Applied, thanks
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2015-08-19 13:39 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-08-18 9:02 [PATCH 1/2] ARM: pfla02: align with and include mainline DT Philipp Zabel
2015-08-18 9:02 ` [PATCH 2/2] ARM: pbab01: " Philipp Zabel
2015-08-19 13:39 ` [PATCH 1/2] ARM: pfla02: " Sascha Hauer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox