mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Antony Pavlov <antonynpavlov@gmail.com>
To: Lucas Stach <l.stach@pengutronix.de>
Cc: barebox@lists.infradead.org, Peter Mamonov <pmamonov@gmail.com>
Subject: Re: [PATCH] ata: intf_platform_ide: add OF bindings
Date: Thu, 3 Sep 2015 19:31:55 +0300	[thread overview]
Message-ID: <20150903193155.1127b6d5fa5948cc70ec4a16@gmail.com> (raw)
In-Reply-To: <1441295192.3102.9.camel@pengutronix.de>

On Thu, 03 Sep 2015 17:46:32 +0200
Lucas Stach <l.stach@pengutronix.de> wrote:

> Hi Peter.
> 
> Sorry, but this patch is wrong. You can't just make up completely ad-hoc
> DT bindings. You are pushing platformdata 1:1 into the DT, which is not
> how the conversion to DT should be done.
> 
> There is also no pre-existing binding for "ata-generic" in the Linux
> kernel which would define any of those properties.

Hmmm. in linux-4.2/drivers/ata/pata_of_platform.c I see "ata-generic"
with "reg-shift" and "pio-mode" properties.

> Most likely your IDE controller is inside some SoC specific block, with
> a specific compatible, which may also handle clocks and other required
> stuff and that one should instantiate the IDE driver if needed.
> 
> Regards,
> Lucas
> 
> Am Donnerstag, den 03.09.2015, 16:38 +0300 schrieb Peter Mamonov:
> > Signed-off-by: Peter Mamonov <pmamonov@gmail.com>
> > ---
> >  drivers/ata/intf_platform_ide.c | 35 +++++++++++++++++++++++++++++++++--
> >  1 file changed, 33 insertions(+), 2 deletions(-)
> > 
> > diff --git a/drivers/ata/intf_platform_ide.c b/drivers/ata/intf_platform_ide.c
> > index 0d392d8..f20e0e0 100644
> > --- a/drivers/ata/intf_platform_ide.c
> > +++ b/drivers/ata/intf_platform_ide.c
> > @@ -29,6 +29,7 @@
> >  #include <ata_drive.h>
> >  #include <platform_ide.h>
> >  #include <linux/err.h>
> > +#include <of.h>
> >  
> >  /**
> >   * Setup the register specific addresses for an ATA like divice
> > @@ -85,10 +86,31 @@ static int platform_ide_probe(struct device_d *dev)
> >  	void *reg_base, *alt_base = NULL;
> >  	struct resource *reg, *alt;
> >  	int mmio = 0;
> > +	struct device_node *dn = dev->device_node;
> > +	u32 tmp32;
> >  
> >  	if (pdata == NULL) {
> > -		dev_err(dev, "No platform data. Cannot continue\n");
> > -		return -EINVAL;
> > +		/* try to get platform data from the device tree */
> > +		if (dn == NULL) {
> > +			dev_err(dev, "No platform data. Cannot continue\n");
> > +			return -EINVAL;
> > +		}
> > +
> > +		pdata = xzalloc(sizeof(struct ide_port_info));
> > +
> > +		if (!pdata) {
> > +			dev_err(dev, "Platform data allocation failed\n");
> > +			return -ENOMEM;
> > +		}
> > +		device_add_data(dev, pdata, sizeof(struct ide_port_info));
> > +
> > +		if (of_property_read_bool(dn, "dataif-be"))
> > +			pdata->dataif_be = 1;
> > +
> > +		if (of_property_read_u32(dn, "reg-shift", &tmp32) == 0)
> > +			pdata->ioport_shift = (unsigned)tmp32;
> > +
> > +		dev->platform_data = pdata;
> >  	}
> >  
> >  	reg_base = dev_request_mem_region(dev, 0);
> > @@ -136,9 +158,18 @@ static int platform_ide_probe(struct device_d *dev)
> >  	return rc;
> >  }
> >  
> > +static __maybe_unused struct of_device_id platform_ide_dt_ids[] = {
> > +	{
> > +		.compatible = "ata-generic",
> > +	}, {
> > +		/* sentinel */
> > +	}
> > +};
> > +
> >  static struct driver_d platform_ide_driver = {
> >  	.name   = "ide_intf",
> >  	.probe  = platform_ide_probe,
> > +	.of_compatible = DRV_OF_COMPAT(platform_ide_dt_ids),
> >  };
> >  device_platform_driver(platform_ide_driver);
> >  
> 
> -- 
> Pengutronix e.K.             | Lucas Stach                 |
> Industrial Linux Solutions   | http://www.pengutronix.de/  |
> 
> 
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox


-- 
-- 
Best regards,
  Antony Pavlov

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2015-09-03 16:24 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-09-03 13:38 Peter Mamonov
2015-09-03 14:24 ` Antony Pavlov
2015-09-03 15:33   ` Peter Mamonov
2015-09-03 16:04   ` Peter Mamonov
2015-09-03 18:13     ` Sascha Hauer
2015-09-07 15:44       ` [PATCHv2] " Peter Mamonov
2015-09-07 15:53         ` Lucas Stach
2015-09-07 16:43           ` [PATCHv3] " Peter Mamonov
2015-09-09  6:54             ` Sascha Hauer
2015-09-03 15:46 ` [PATCH] " Lucas Stach
2015-09-03 16:31   ` Antony Pavlov [this message]
2015-09-03 18:16     ` Sascha Hauer
2015-09-04 10:15       ` Peter Mamonov
2015-09-04  9:40   ` Peter Mamonov
2015-09-04 10:23     ` Lucas Stach

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150903193155.1127b6d5fa5948cc70ec4a16@gmail.com \
    --to=antonynpavlov@gmail.com \
    --cc=barebox@lists.infradead.org \
    --cc=l.stach@pengutronix.de \
    --cc=pmamonov@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox