* [PATCH 1/2] usb: ehci-hcd: port periodic transactions implementation from the u-boot
2015-09-17 11:18 [RFC v4 0/2] WIP: add usb keyboard driver Peter Mamonov
@ 2015-09-17 11:18 ` Peter Mamonov
2015-09-17 11:18 ` [PATCH 2/2] input: port usb keyboard driver " Peter Mamonov
2015-09-21 6:18 ` [RFC v4 0/2] WIP: add usb keyboard driver Sascha Hauer
2 siblings, 0 replies; 4+ messages in thread
From: Peter Mamonov @ 2015-09-17 11:18 UTC (permalink / raw)
To: barebox; +Cc: Peter Mamonov
Signed-off-by: Peter Mamonov <pmamonov@gmail.com>
---
drivers/usb/host/ehci-hcd.c | 400 +++++++++++++++++++++++++++++++++++++++++++-
drivers/usb/host/ehci.h | 15 +-
2 files changed, 413 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 551d1a0..9553fdf 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -48,6 +48,18 @@ struct ehci_priv {
int (*init)(void *drvdata);
int (*post_init)(void *drvdata);
void *drvdata;
+ int periodic_schedules;
+ struct QH *periodic_queue;
+ uint32_t *periodic_list;
+};
+
+struct int_queue {
+ int elementsize;
+ unsigned long pipe;
+ struct QH *first;
+ struct QH *current;
+ struct QH *last;
+ struct qTD *tds;
};
#define to_ehci(ptr) container_of(ptr, struct ehci_priv, host)
@@ -768,6 +780,8 @@ static int ehci_init(struct usb_host *host)
uint32_t reg;
uint32_t cmd;
int ret = 0;
+ struct QH *periodic;
+ int i;
ehci_halt(ehci);
@@ -798,6 +812,44 @@ static int ehci_init(struct usb_host *host)
ehci_writel(&ehci->hcor->or_asynclistaddr, ba);
}
+ /*
+ * Set up periodic list
+ * Step 1: Parent QH for all periodic transfers.
+ */
+ ehci->periodic_schedules = 0;
+ periodic = ehci->periodic_queue;
+ memset(periodic, 0, sizeof(*periodic));
+ periodic->qh_link = cpu_to_hc32(QH_LINK_TERMINATE);
+ periodic->qt_next = cpu_to_hc32(QT_NEXT_TERMINATE);
+ periodic->qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE);
+
+ /*
+ * Step 2: Setup frame-list: Every microframe, USB tries the same list.
+ * In particular, device specifications on polling frequency
+ * are disregarded. Keyboards seem to send NAK/NYet reliably
+ * when polled with an empty buffer.
+ *
+ * Split Transactions will be spread across microframes using
+ * S-mask and C-mask.
+ */
+ if (ehci->periodic_list == NULL)
+ /*
+ * FIXME: this memory chunk have to be 4k aligned AND
+ * reside in coherent memory. Current implementation of
+ * dma_alloc_coherent() allocates PAGE_SIZE aligned memory chunks.
+ * PAGE_SIZE less then 4k will break this code.
+ */
+ ehci->periodic_list = dma_alloc_coherent(1024 * 4,
+ DMA_ADDRESS_BROKEN);
+ for (i = 0; i < 1024; i++) {
+ ehci->periodic_list[i] = cpu_to_hc32((unsigned long)periodic
+ | QH_LINK_TYPE_QH);
+ }
+
+ /* Set periodic list base address */
+ ehci_writel(&ehci->hcor->or_periodiclistbase,
+ (unsigned long)ehci->periodic_list);
+
reg = ehci_readl(&ehci->hccr->cr_hcsparams);
descriptor.hub.bNbrPorts = HCS_N_PORTS(reg);
@@ -869,15 +921,359 @@ submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
}
static int
+disable_periodic(struct ehci_priv *ehci)
+{
+ uint32_t cmd;
+ struct ehci_hcor *hcor = ehci->hcor;
+ int ret;
+
+ cmd = ehci_readl(&hcor->or_usbcmd);
+ cmd &= ~CMD_PSE;
+ ehci_writel(&hcor->or_usbcmd, cmd);
+
+ ret = handshake((uint32_t *)&hcor->or_usbsts,
+ STS_PSS, 0, 100 * 1000);
+ if (ret < 0) {
+ printf("EHCI failed: timeout when disabling periodic list\n");
+ return -ETIMEDOUT;
+ }
+ return 0;
+}
+
+#define NEXT_QH(qh) (struct QH *)((0xa0000000 | (unsigned long)hc32_to_cpu((qh)->qh_link)) & ~0x1f)
+
+static int
+enable_periodic(struct ehci_priv *ehci)
+{
+ uint32_t cmd;
+ struct ehci_hcor *hcor = ehci->hcor;
+ int ret;
+ uint64_t start;
+
+ cmd = ehci_readl(&hcor->or_usbcmd);
+ cmd |= CMD_PSE;
+ ehci_writel(&hcor->or_usbcmd, cmd);
+
+ ret = handshake((uint32_t *)&hcor->or_usbsts,
+ STS_PSS, STS_PSS, 100 * 1000);
+ if (ret < 0) {
+ printf("EHCI failed: timeout when enabling periodic list\n");
+ return -ETIMEDOUT;
+ }
+
+ start = get_time_ns();
+ while(!is_timeout_non_interruptible(start, 1 * MSECOND));
+
+ return 0;
+}
+
+static inline u8 ehci_encode_speed(enum usb_device_speed speed)
+{
+ #define QH_HIGH_SPEED 2
+ #define QH_FULL_SPEED 0
+ #define QH_LOW_SPEED 1
+ if (speed == USB_SPEED_HIGH)
+ return QH_HIGH_SPEED;
+ if (speed == USB_SPEED_LOW)
+ return QH_LOW_SPEED;
+ return QH_FULL_SPEED;
+}
+
+static void ehci_update_endpt2_dev_n_port(struct usb_device *udev,
+ struct QH *qh)
+{
+ struct usb_device *ttdev;
+ int parent_devnum;
+
+ if (udev->speed != USB_SPEED_LOW && udev->speed != USB_SPEED_FULL)
+ return;
+
+ /*
+ * For full / low speed devices we need to get the devnum and portnr of
+ * the tt, so of the first upstream usb-2 hub, there may be usb-1 hubs
+ * in the tree before that one!
+ */
+
+ ttdev = udev;
+ while (ttdev->parent && ttdev->parent->speed != USB_SPEED_HIGH)
+ ttdev = ttdev->parent;
+ if (!ttdev->parent)
+ return;
+ parent_devnum = ttdev->parent->devnum;
+
+ qh->qh_endpt2 |= cpu_to_hc32(QH_ENDPT2_PORTNUM(ttdev->portnr) |
+ QH_ENDPT2_HUBADDR(parent_devnum));
+}
+
+static struct int_queue *ehci_create_int_queue(struct usb_device *dev,
+ unsigned long pipe, int queuesize, int elementsize,
+ void *buffer, int interval)
+{
+ struct usb_host *host = dev->host;
+ struct ehci_priv *ehci = to_ehci(host);
+ struct int_queue *result = NULL;
+ uint32_t i, toggle;
+ struct QH *list = ehci->periodic_queue;
+
+ /*
+ * Interrupt transfers requiring several transactions are not supported
+ * because bInterval is ignored.
+ *
+ * Also, ehci_submit_async() relies on wMaxPacketSize being a power of 2
+ * <= PKT_ALIGN if several qTDs are required, while the USB
+ * specification does not constrain this for interrupt transfers. That
+ * means that ehci_submit_async() would support interrupt transfers
+ * requiring several transactions only as long as the transfer size does
+ * not require more than a single qTD.
+ */
+ if (elementsize > usb_maxpacket(dev, pipe)) {
+ dev_err(&dev->dev,
+ "%s: xfers requiring several transactions are not supported.\n",
+ __func__);
+ return NULL;
+ }
+
+ debug("Enter create_int_queue\n");
+ if (usb_pipetype(pipe) != PIPE_INTERRUPT) {
+ dev_dbg(&dev->dev,
+ "non-interrupt pipe (type=%lu)",
+ usb_pipetype(pipe));
+ return NULL;
+ }
+
+ /* limit to 4 full pages worth of data -
+ * we can safely fit them in a single TD,
+ * no matter the alignment
+ */
+ if (elementsize >= 16384) {
+ dev_dbg(&dev->dev,
+ "too large elements for interrupt transfers\n");
+ return NULL;
+ }
+
+ result = xzalloc(sizeof(*result));
+ result->elementsize = elementsize;
+ result->pipe = pipe;
+ result->first = dma_alloc_coherent(sizeof(struct QH) * queuesize,
+ DMA_ADDRESS_BROKEN);
+ result->current = result->first;
+ result->last = result->first + queuesize - 1;
+ result->tds = dma_alloc_coherent(sizeof(struct qTD) * queuesize,
+ DMA_ADDRESS_BROKEN);
+ memset(result->first, 0, sizeof(struct QH) * queuesize);
+ memset(result->tds, 0, sizeof(struct qTD) * queuesize);
+
+ toggle = usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe));
+
+ for (i = 0; i < queuesize; i++) {
+ struct QH *qh = result->first + i;
+ struct qTD *td = result->tds + i;
+ void **buf = &qh->buffer;
+
+ qh->qh_link = cpu_to_hc32((unsigned long)(qh+1) | QH_LINK_TYPE_QH);
+ if (i == queuesize - 1)
+ qh->qh_link = cpu_to_hc32(QH_LINK_TERMINATE);
+
+ qh->qt_next = cpu_to_hc32((unsigned long)td);
+ qh->qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE);
+ qh->qh_endpt1 =
+ cpu_to_hc32((0 << 28) | /* No NAK reload (ehci 4.9) */
+ (usb_maxpacket(dev, pipe) << 16) | /* MPS */
+ (1 << 14) |
+ QH_ENDPT1_EPS(ehci_encode_speed(dev->speed)) |
+ (usb_pipeendpoint(pipe) << 8) | /* Endpoint Number */
+ (usb_pipedevice(pipe) << 0));
+ qh->qh_endpt2 = cpu_to_hc32((1 << 30) | /* 1 Tx per mframe */
+ (1 << 0)); /* S-mask: microframe 0 */
+ if (dev->speed == USB_SPEED_LOW ||
+ dev->speed == USB_SPEED_FULL) {
+ /* C-mask: microframes 2-4 */
+ qh->qh_endpt2 |= cpu_to_hc32((0x1c << 8));
+ }
+ ehci_update_endpt2_dev_n_port(dev, qh);
+
+ td->qt_next = cpu_to_hc32(QT_NEXT_TERMINATE);
+ td->qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE);
+ dev_dbg(&dev->dev,
+ "communication direction is '%s'\n",
+ usb_pipein(pipe) ? "in" : "out");
+ td->qt_token = cpu_to_hc32(
+ QT_TOKEN_DT(toggle) |
+ (elementsize << 16) |
+ ((usb_pipein(pipe) ? 1 : 0) << 8) | /* IN/OUT token */
+ 0x80); /* active */
+ td->qt_buffer[0] =
+ cpu_to_hc32((unsigned long)buffer + i * elementsize);
+ td->qt_buffer[1] =
+ cpu_to_hc32((td->qt_buffer[0] + 0x1000) & ~0xfff);
+ td->qt_buffer[2] =
+ cpu_to_hc32((td->qt_buffer[0] + 0x2000) & ~0xfff);
+ td->qt_buffer[3] =
+ cpu_to_hc32((td->qt_buffer[0] + 0x3000) & ~0xfff);
+ td->qt_buffer[4] =
+ cpu_to_hc32((td->qt_buffer[0] + 0x4000) & ~0xfff);
+
+ *buf = buffer + i * elementsize;
+ toggle ^= 1;
+ }
+
+ if (ehci->periodic_schedules > 0) {
+ if (disable_periodic(ehci) < 0) {
+ dev_err(&dev->dev,
+ "FATAL: periodic should never fail, but did");
+ goto fail3;
+ }
+ }
+
+ /* hook up to periodic list */
+ result->last->qh_link = list->qh_link;
+ list->qh_link = cpu_to_hc32((unsigned long)result->first | QH_LINK_TYPE_QH);
+
+ if (enable_periodic(ehci) < 0) {
+ dev_err(&dev->dev,
+ "FATAL: periodic should never fail, but did");
+ goto fail3;
+ }
+ ehci->periodic_schedules++;
+
+ dev_dbg(&dev->dev, "Exit create_int_queue\n");
+ return result;
+fail3:
+ dma_free_coherent(result->tds, 0, sizeof(struct qTD) * queuesize);
+ dma_free_coherent(result->first, 0, sizeof(struct QH) * queuesize);
+ free(result);
+ return NULL;
+}
+
+static void *ehci_poll_int_queue(struct usb_device *dev,
+ struct int_queue *queue)
+{
+ struct QH *cur = queue->current;
+ struct qTD *cur_td;
+ uint32_t token, toggle;
+ unsigned long pipe = queue->pipe;
+
+ /* depleted queue */
+ if (cur == NULL) {
+ dev_dbg(&dev->dev, "Exit poll_int_queue with completed queue\n");
+ return NULL;
+ }
+ /* still active */
+ cur_td = &queue->tds[queue->current - queue->first];
+ token = hc32_to_cpu(cur_td->qt_token);
+ if (QT_TOKEN_GET_STATUS(token) & QT_TOKEN_STATUS_ACTIVE) {
+ dev_dbg(&dev->dev,
+ "Exit poll_int_queue with no completed intr transfer. token is %x\n",
+ token);
+ return NULL;
+ }
+
+ toggle = QT_TOKEN_GET_DT(token);
+ usb_settoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe), toggle);
+
+ if (!(cur->qh_link & QH_LINK_TERMINATE))
+ queue->current++;
+ else
+ queue->current = NULL;
+
+ dev_dbg(&dev->dev,
+ "Exit poll_int_queue with completed intr transfer. token is %x at %p (first at %p)\n",
+ token, cur, queue->first);
+ return cur->buffer;
+}
+
+static int ehci_destroy_int_queue(struct usb_device *dev,
+ struct int_queue *queue)
+{
+ int result = -EINVAL;
+ struct usb_host *host = dev->host;
+ struct ehci_priv *ehci = to_ehci(host);
+ struct QH *cur = ehci->periodic_queue;
+ uint64_t start;
+
+ if (disable_periodic(ehci) < 0) {
+ dev_err(&dev->dev,
+ "FATAL: periodic should never fail, but did\n");
+ goto out;
+ }
+ ehci->periodic_schedules--;
+
+ start = get_time_ns();
+ while (!(cur->qh_link & cpu_to_hc32(QH_LINK_TERMINATE))) {
+ dev_dbg(&dev->dev,
+ "considering %p, with qh_link %x\n",
+ cur, cur->qh_link);
+ if (NEXT_QH(cur) == queue->first) {
+ dev_dbg(&dev->dev,
+ "found candidate. removing from chain\n");
+ cur->qh_link = queue->last->qh_link;
+ result = 0;
+ break;
+ }
+ cur = NEXT_QH(cur);
+ if (is_timeout_non_interruptible(start, 500 * MSECOND)) {
+ dev_err(&dev->dev,
+ "Timeout destroying interrupt endpoint queue\n");
+ result = -ETIMEDOUT;
+ goto out;
+ }
+ }
+
+ if (ehci->periodic_schedules > 0) {
+ result = enable_periodic(ehci);
+ if (result < 0)
+ dev_err(&dev->dev,
+ "FATAL: periodic should never fail, but did");
+ }
+
+out:
+ free(queue->tds);
+ free(queue->first);
+ free(queue);
+
+ return result;
+}
+
+static int
submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
int length, int interval)
{
struct usb_host *host = dev->host;
struct ehci_priv *ehci = to_ehci(host);
+ struct int_queue *queue;
+ uint64_t start;
+ void *backbuffer;
+ int result = 0, ret;
dev_dbg(ehci->dev, "dev=%p, pipe=%lu, buffer=%p, length=%d, interval=%d",
dev, pipe, buffer, length, interval);
- return -1;
+
+ queue = ehci_create_int_queue(dev, pipe, 1, length, buffer, interval);
+ if (!queue)
+ return -EINVAL;
+
+ start = get_time_ns();
+ while ((backbuffer = ehci_poll_int_queue(dev, queue)) == NULL)
+ if (is_timeout_non_interruptible(start,
+ USB_CNTL_TIMEOUT * MSECOND)) {
+ dev_err(&dev->dev,
+ "Timeout poll on interrupt endpoint\n");
+ result = -ETIMEDOUT;
+ break;
+ }
+
+ if (backbuffer != buffer) {
+ dev_err(&dev->dev,
+ "got wrong buffer back (%p instead of %p)\n",
+ backbuffer, buffer);
+ return -EINVAL;
+ }
+
+ ret = ehci_destroy_int_queue(dev, queue);
+ if (ret < 0)
+ return ret;
+
+ return result;
}
static int ehci_detect(struct device_d *dev)
@@ -912,6 +1308,8 @@ int ehci_register(struct device_d *dev, struct ehci_data *data)
ehci->qh_list = dma_alloc_coherent(sizeof(struct QH) * NUM_TD,
DMA_ADDRESS_BROKEN);
+ ehci->periodic_queue = dma_alloc_coherent(sizeof(struct QH),
+ DMA_ADDRESS_BROKEN);
ehci->td = dma_alloc_coherent(sizeof(struct qTD) * NUM_TD,
DMA_ADDRESS_BROKEN);
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index d71d056..39de763 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -20,6 +20,15 @@
#include <io.h>
+#define QH_ENDPT1_EPS(x) (((x) & 0x3) << 12) /* Endpoint Speed */
+#define QH_ENDPT2_PORTNUM(x) (((x) & 0x7f) << 23) /* Port Number */
+#define QH_ENDPT2_HUBADDR(x) (((x) & 0x7f) << 16) /* Hub Address */
+
+#define QT_TOKEN_DT(x) (((x) & 0x1) << 31) /* Data Toggle */
+#define QT_TOKEN_GET_STATUS(x) (((x) >> 0) & 0xff)
+#define QT_TOKEN_STATUS_ACTIVE 0x80
+#define QT_TOKEN_GET_DT(x) (((x) >> 31) & 0x1)
+
#if !defined(CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS)
#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 16
#endif
@@ -51,6 +60,7 @@ struct ehci_hcor {
#define CMD_RUN (1 << 0) /* start/stop HC */
uint32_t or_usbsts;
#define STD_ASS (1 << 15)
+#define STS_PSS (1 << 14)
#define STS_HALT (1 << 12)
uint32_t or_usbintr;
uint32_t or_frindex;
@@ -148,7 +158,10 @@ struct QH {
* Add dummy fill value to make the size of this struct
* aligned to 32 bytes
*/
- uint8_t fill[16];
+ union {
+ uint8_t fill[16];
+ void* buffer;
+ };
};
#endif /* USB_EHCI_H */
--
2.1.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 4+ messages in thread* [PATCH 2/2] input: port usb keyboard driver from the u-boot
2015-09-17 11:18 [RFC v4 0/2] WIP: add usb keyboard driver Peter Mamonov
2015-09-17 11:18 ` [PATCH 1/2] usb: ehci-hcd: port periodic transactions implementation from the u-boot Peter Mamonov
@ 2015-09-17 11:18 ` Peter Mamonov
2015-09-21 6:18 ` [RFC v4 0/2] WIP: add usb keyboard driver Sascha Hauer
2 siblings, 0 replies; 4+ messages in thread
From: Peter Mamonov @ 2015-09-17 11:18 UTC (permalink / raw)
To: barebox; +Cc: Peter Mamonov
Signed-off-by: Peter Mamonov <pmamonov@gmail.com>
---
drivers/input/Kconfig | 7 +
drivers/input/Makefile | 1 +
drivers/input/usb_kbd.c | 416 ++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 424 insertions(+)
create mode 100644 drivers/input/usb_kbd.c
diff --git a/drivers/input/Kconfig b/drivers/input/Kconfig
index b4e86fd..24a5d10 100644
--- a/drivers/input/Kconfig
+++ b/drivers/input/Kconfig
@@ -46,4 +46,11 @@ config KEYBOARD_TWL6030
help
Say Y here if you want to use TWL6030 power button as a key.
+config KEYBOARD_USB
+ bool "USB keyboard"
+ depends on USB_HOST
+ select POLLER
+ help
+ This driver implements support for usb keyboard.
+
endmenu
diff --git a/drivers/input/Makefile b/drivers/input/Makefile
index 2143336..40b898c 100644
--- a/drivers/input/Makefile
+++ b/drivers/input/Makefile
@@ -1,3 +1,4 @@
+obj-$(CONFIG_KEYBOARD_USB) += usb_kbd.o
obj-$(CONFIG_KEYBOARD_GPIO) += gpio_keys.o
obj-$(CONFIG_KEYBOARD_TWL6030) += twl6030_pwrbtn.o
obj-$(CONFIG_KEYBOARD_IMX_KEYPAD) += imx_keypad.o
diff --git a/drivers/input/usb_kbd.c b/drivers/input/usb_kbd.c
new file mode 100644
index 0000000..db1ba90
--- /dev/null
+++ b/drivers/input/usb_kbd.c
@@ -0,0 +1,416 @@
+/*
+ * USB keyboard driver for barebox
+ *
+ * (C) Copyright 2001 Denis Peter, MPL AG Switzerland
+ * (C) Copyright 2015 Peter Mamonov
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <common.h>
+#include <init.h>
+#include <clock.h>
+#include <poller.h>
+#include <usb/usb.h>
+#include <string.h>
+#include <dma.h>
+#include <kfifo.h>
+
+#define USB_KBD_FIFO_SIZE 50
+
+#define REPEAT_RATE 40 /* 40msec -> 25cps */
+#define REPEAT_DELAY 10 /* 10 x REPEAT_RATE = 400msec */
+
+#define NUM_LOCK 0x53
+#define CAPS_LOCK 0x39
+#define SCROLL_LOCK 0x47
+
+/* Modifier bits */
+#define LEFT_CNTR (1 << 0)
+#define LEFT_SHIFT (1 << 1)
+#define LEFT_ALT (1 << 2)
+#define LEFT_GUI (1 << 3)
+#define RIGHT_CNTR (1 << 4)
+#define RIGHT_SHIFT (1 << 5)
+#define RIGHT_ALT (1 << 6)
+#define RIGHT_GUI (1 << 7)
+
+/* Size of the keyboard buffer */
+#define USB_KBD_BUFFER_LEN 0x20
+
+/* Keyboard maps */
+static const unsigned char usb_kbd_numkey[] = {
+ '1', '2', '3', '4', '5', '6', '7', '8', '9', '0',
+ '\r', 0x1b, '\b', '\t', ' ', '-', '=', '[', ']',
+ '\\', '#', ';', '\'', '`', ',', '.', '/'
+};
+static const unsigned char usb_kbd_numkey_shifted[] = {
+ '!', '@', '#', '$', '%', '^', '&', '*', '(', ')',
+ '\r', 0x1b, '\b', '\t', ' ', '_', '+', '{', '}',
+ '|', '~', ':', '"', '~', '<', '>', '?'
+};
+
+static const unsigned char usb_kbd_num_keypad[] = {
+ '/', '*', '-', '+', '\r',
+ '1', '2', '3', '4', '5', '6', '7', '8', '9', '0',
+ '.', 0, 0, 0, '='
+};
+
+/*
+ * map arrow keys to ^F/^B ^N/^P, can't really use the proper
+ * ANSI sequence for arrow keys because the queuing code breaks
+ * when a single keypress expands to 3 queue elements
+ */
+static const unsigned char usb_kbd_arrow[] = {
+ 0x6, 0x2, 0xe, 0x10
+};
+
+/*
+ * NOTE: It's important for the NUM, CAPS, SCROLL-lock bits to be in this
+ * order. See usb_kbd_setled() function!
+ */
+#define USB_KBD_NUMLOCK (1 << 0)
+#define USB_KBD_CAPSLOCK (1 << 1)
+#define USB_KBD_SCROLLLOCK (1 << 2)
+#define USB_KBD_CTRL (1 << 3)
+
+#define USB_KBD_LEDMASK \
+ (USB_KBD_NUMLOCK | USB_KBD_CAPSLOCK | USB_KBD_SCROLLLOCK)
+
+/*
+ * USB Keyboard reports are 8 bytes in boot protocol.
+ * Appendix B of HID Device Class Definition 1.11
+ */
+#define USB_KBD_BOOT_REPORT_SIZE 8
+
+struct usb_kbd_pdata;
+
+struct usb_kbd_pdata {
+ uint64_t last_report;
+ uint64_t last_poll;
+ uint8_t *new;
+ uint8_t old[USB_KBD_BOOT_REPORT_SIZE];
+ uint32_t repeat_delay;
+ uint8_t flags;
+ struct poller_struct poller;
+ struct usb_device *usbdev;
+ struct console_device cdev;
+ struct kfifo *recv_fifo;
+ int lock;
+ unsigned long intpipe;
+ int intpktsize;
+ int intinterval;
+ struct usb_endpoint_descriptor *ep;
+ int (*do_poll)(struct usb_kbd_pdata *);
+};
+
+static int usb_kbd_int_poll(struct usb_kbd_pdata *data)
+{
+ return usb_submit_int_msg(data->usbdev, data->intpipe, data->new,
+ data->intpktsize, data->intinterval);
+}
+
+static int usb_kbd_cnt_poll(struct usb_kbd_pdata *data)
+{
+ struct usb_interface *iface = &data->usbdev->config.interface[0];
+
+ return usb_get_report(data->usbdev, iface->desc.bInterfaceNumber,
+ 1, 0, data->new, USB_KBD_BOOT_REPORT_SIZE);
+}
+
+#define CAPITAL_MASK 0x20
+/* Translate the scancode in ASCII */
+static int usb_kbd_translate(struct usb_kbd_pdata *data, unsigned char scancode,
+ unsigned char modifier, int pressed)
+{
+ int keycode = 0;
+
+ /* Key released */
+ if (pressed == 0) {
+ data->repeat_delay = 0;
+ return 0;
+ }
+
+ if (pressed == 2) {
+ data->repeat_delay++;
+ if (data->repeat_delay < REPEAT_DELAY)
+ return 0;
+
+ data->repeat_delay = REPEAT_DELAY;
+ }
+
+ /* Alphanumeric values */
+ if ((scancode > 3) && (scancode <= 0x1d)) {
+ keycode = scancode - 4 + 'a';
+
+ if (data->flags & USB_KBD_CAPSLOCK)
+ keycode &= ~CAPITAL_MASK;
+
+ if (modifier & (LEFT_SHIFT | RIGHT_SHIFT)) {
+ /* Handle CAPSLock + Shift pressed simultaneously */
+ if (keycode & CAPITAL_MASK)
+ keycode &= ~CAPITAL_MASK;
+ else
+ keycode |= CAPITAL_MASK;
+ }
+ }
+
+ if ((scancode > 0x1d) && (scancode < 0x3a)) {
+ /* Shift pressed */
+ if (modifier & (LEFT_SHIFT | RIGHT_SHIFT))
+ keycode = usb_kbd_numkey_shifted[scancode - 0x1e];
+ else
+ keycode = usb_kbd_numkey[scancode - 0x1e];
+ }
+
+ /* Arrow keys */
+ if ((scancode >= 0x4f) && (scancode <= 0x52))
+ keycode = usb_kbd_arrow[scancode - 0x4f];
+
+ /* Numeric keypad */
+ if ((scancode >= 0x54) && (scancode <= 0x67))
+ keycode = usb_kbd_num_keypad[scancode - 0x54];
+
+ if (data->flags & USB_KBD_CTRL)
+ keycode = scancode - 0x3;
+
+ if (pressed == 1) {
+ if (scancode == NUM_LOCK) {
+ data->flags ^= USB_KBD_NUMLOCK;
+ return 1;
+ }
+
+ if (scancode == CAPS_LOCK) {
+ data->flags ^= USB_KBD_CAPSLOCK;
+ return 1;
+ }
+ if (scancode == SCROLL_LOCK) {
+ data->flags ^= USB_KBD_SCROLLLOCK;
+ return 1;
+ }
+ }
+
+ /* Report keycode if any */
+ if (keycode) {
+ pr_debug("%s: key pressed: '%c'\n", __FUNCTION__, keycode);
+ kfifo_put(data->recv_fifo, (u_char*)&keycode, sizeof(keycode));
+ }
+
+ return 0;
+}
+
+static uint32_t usb_kbd_service_key(struct usb_kbd_pdata *data, int i, int up)
+{
+ uint32_t res = 0;
+ uint8_t *new;
+ uint8_t *old;
+
+ if (up) {
+ new = data->old;
+ old = data->new;
+ } else {
+ new = data->new;
+ old = data->old;
+ }
+
+ if ((old[i] > 3) &&
+ (memscan(new + 2, old[i], USB_KBD_BOOT_REPORT_SIZE - 2) ==
+ new + USB_KBD_BOOT_REPORT_SIZE)) {
+ res |= usb_kbd_translate(data, old[i], data->new[0], up);
+ }
+
+ return res;
+}
+
+static void usb_kbd_setled(struct usb_kbd_pdata *data)
+{
+ struct usb_device *usbdev = data->usbdev;
+ struct usb_interface *iface = &usbdev->config.interface[0];
+ uint8_t leds = (uint8_t)(data->flags & USB_KBD_LEDMASK);
+
+ usb_control_msg(usbdev, usb_sndctrlpipe(usbdev, 0),
+ USB_REQ_SET_REPORT, USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+ 0x200, iface->desc.bInterfaceNumber, &leds, 1, USB_CNTL_TIMEOUT);
+}
+
+
+static int usb_kbd_process(struct usb_kbd_pdata *data)
+{
+ int i, res = 0;
+
+ /* No combo key pressed */
+ if (data->new[0] == 0x00)
+ data->flags &= ~USB_KBD_CTRL;
+ /* Left or Right Ctrl pressed */
+ else if ((data->new[0] == LEFT_CNTR) || (data->new[0] == RIGHT_CNTR))
+ data->flags |= USB_KBD_CTRL;
+
+ for (i = 2; i < USB_KBD_BOOT_REPORT_SIZE; i++) {
+ res |= usb_kbd_service_key(data, i, 0);
+ res |= usb_kbd_service_key(data, i, 1);
+ }
+
+ /* Key is still pressed */
+ if ((data->new[2] > 3) && (data->old[2] == data->new[2]))
+ res |= usb_kbd_translate(data, data->new[2], data->new[0], 2);
+
+ if (res == 1)
+ usb_kbd_setled(data);
+
+ return 1;
+}
+
+static void usb_kbd_poll(struct poller_struct *poller)
+{
+ struct usb_kbd_pdata *data = container_of(poller,
+ struct usb_kbd_pdata, poller);
+ struct usb_device *usbdev = data->usbdev;
+ int diff, tout;
+
+ if (data->lock)
+ return;
+ data->lock = 1;
+
+ if (0 > data->do_poll(data)) {
+ /* exit and lock forever */
+ dev_err(&usbdev->dev,
+ "usb_submit_int_msg() failed. Keyboard disconnect?\n");
+ return;
+ }
+ diff = memcmp(data->old, data->new, USB_KBD_BOOT_REPORT_SIZE);
+ tout = get_time_ns() > data->last_report + REPEAT_RATE * MSECOND;
+ if (diff || tout) {
+ data->last_report = get_time_ns();
+ if (diff) {
+ pr_debug("%s: old report: %016llx\n",
+ __func__,
+ *((volatile uint64_t *)data->old));
+ pr_debug("%s: new report: %016llx\n\n",
+ __func__,
+ *((volatile uint64_t *)data->new));
+ }
+ usb_kbd_process(data);
+ memcpy(data->old, data->new, USB_KBD_BOOT_REPORT_SIZE);
+ }
+
+ data->lock = 0;
+}
+
+static int usb_kbd_getc(struct console_device *cdev)
+{
+ int code = 0;
+ struct usb_kbd_pdata *data = container_of(cdev, struct usb_kbd_pdata, cdev);
+
+ kfifo_get(data->recv_fifo, (u_char*)&code, sizeof(int));
+ return code;
+}
+
+static int usb_kbd_tstc(struct console_device *cdev)
+{
+ struct usb_kbd_pdata *data = container_of(cdev, struct usb_kbd_pdata, cdev);
+
+ return (kfifo_len(data->recv_fifo) == 0) ? 0 : 1;
+}
+
+static int usb_kbd_probe(struct usb_device *usbdev,
+ const struct usb_device_id *id)
+{
+ int ret;
+ struct usb_interface *iface = &usbdev->config.interface[0];
+ struct usb_kbd_pdata *data;
+ struct console_device *cdev;
+
+ dev_info(&usbdev->dev, "USB keyboard found\n");
+ dev_dbg(&usbdev->dev, "Debug enabled\n");
+ ret = usb_set_protocol(usbdev, iface->desc.bInterfaceNumber, 0);
+ if (ret < 0)
+ return ret;
+
+ ret = usb_set_idle(usbdev, iface->desc.bInterfaceNumber, REPEAT_RATE / 4, 0);
+ if (ret < 0)
+ return ret;
+
+ data = xzalloc(sizeof(struct usb_kbd_pdata));
+ usbdev->drv_data = data;
+ data->recv_fifo = kfifo_alloc(USB_KBD_FIFO_SIZE);
+ data->new = dma_alloc_coherent(USB_KBD_BOOT_REPORT_SIZE, NULL);
+
+ data->usbdev = usbdev;
+ data->last_report = get_time_ns();
+
+ data->ep = &iface->ep_desc[0];
+ data->intpipe = usb_rcvintpipe(usbdev, data->ep->bEndpointAddress);
+ data->intpktsize = min(usb_maxpacket(usbdev, data->intpipe),
+ USB_KBD_BOOT_REPORT_SIZE);
+ data->intinterval = data->ep->bInterval;
+ /* test polling via interrupt endpoint */
+ data->do_poll = usb_kbd_int_poll;
+ ret = data->do_poll(data);
+ if (ret < 0) {
+ /* fall back to polling via control enpoint */
+ data->do_poll = usb_kbd_cnt_poll;
+ usb_set_idle(usbdev,
+ iface->desc.bInterfaceNumber, 0, 0);
+ ret = data->do_poll(data);
+ if (ret < 0) {
+ /* no luck */
+ kfifo_free(data->recv_fifo);
+ dma_free_coherent(data->new, 0,
+ USB_KBD_BOOT_REPORT_SIZE);
+ free(data);
+ return ret;
+ } else
+ dev_dbg(&usbdev->dev, "poll keyboard via cont ep\n");
+ } else
+ dev_dbg(&usbdev->dev, "poll keyboard via int ep\n");
+
+ cdev = &data->cdev;
+ usbdev->dev.type_data = cdev;
+ cdev->dev = &usbdev->dev;
+ cdev->tstc = usb_kbd_tstc;
+ cdev->getc = usb_kbd_getc;
+
+ console_register(cdev);
+ console_set_active(cdev, CONSOLE_STDIN);
+
+ data->poller.func = usb_kbd_poll;
+ return poller_register(&data->poller);
+}
+
+static void usb_kbd_disconnect(struct usb_device *usbdev)
+{
+ struct usb_kbd_pdata *data = usbdev->drv_data;
+
+ poller_unregister(&data->poller);
+ console_unregister(&data->cdev);
+ kfifo_free(data->recv_fifo);
+ dma_free_coherent(data->new, 0, USB_KBD_BOOT_REPORT_SIZE);
+ free(data);
+}
+
+static struct usb_device_id usb_kbd_usb_ids[] = {
+ { USB_INTERFACE_INFO(3, 1, 1) }, // usb keyboard
+ { }
+};
+
+static struct usb_driver usb_kbd_driver = {
+ .name = "usb-keyboard",
+ .id_table = usb_kbd_usb_ids,
+ .probe = usb_kbd_probe,
+ .disconnect = usb_kbd_disconnect,
+};
+
+static int __init usb_kbd_init(void)
+{
+ return usb_driver_register(&usb_kbd_driver);
+}
+device_initcall(usb_kbd_init);
--
2.1.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 4+ messages in thread