From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:67c:670:201:290:27ff:fe1d:cc33]) by bombadil.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1ZjTBw-0004CB-Nu for barebox@lists.infradead.org; Tue, 06 Oct 2015 14:26:11 +0000 Received: from ptx.hi.pengutronix.de ([2001:67c:670:100:1d::c0] ident=Debian-exim) by metis.ext.pengutronix.de with esmtps (TLS1.2:DHE_RSA_AES_128_CBC_SHA1:128) (Exim 4.80) (envelope-from ) id 1ZjTBZ-0004Li-J1 for barebox@lists.infradead.org; Tue, 06 Oct 2015 16:25:45 +0200 Received: from sha by ptx.hi.pengutronix.de with local (Exim 4.80) (envelope-from ) id 1ZjTBY-0004am-Hp for barebox@lists.infradead.org; Tue, 06 Oct 2015 16:25:44 +0200 Date: Tue, 6 Oct 2015 16:25:44 +0200 From: Sascha Hauer Message-ID: <20151006142544.GA7858@pengutronix.de> MIME-Version: 1.0 Content-Disposition: inline List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="iso-8859-15" Content-Transfer-Encoding: quoted-printable Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: v2015.10.0 To: Barebox List Hi All, We have an October release. No big changes included this time. What's worth mentioning is the i2c recovery support. This needs driver support to work and in several cases this must also be supported in the device tree, but if you see nonworking i2c busses sometimes you should consider implementing it. As usual here follows the list of patches that went into this release. Sascha ---------------------------------------------------------------- Alexander Shiyan (1): mci: mmci: Fix status flags check Andrey Smirnov (2): lib: libfile: Do not ignore errors in close() i2c-imx: Fix memory leak in i2c_fsl_probe() Christian Hemp (1): ARM: pfla02: Add module revison detection Fabio Estevam (1): spi-nor: Align spi_nor_ids[] with kernel 4.1 Jan Luebbe (7): at24: support write-protect GPIO i2c: add bus recovery infrastructure i2c-omap: clear ARDY twice i2c-omap: add bus recovery support i2c: algo-bit: fix debug code i2c: algo-bit: check if the bus is busy i2c: gpio: add bus recovery support Juergen Borleis (1): mfd: da9053: add da9053 watchdog and system restart driver Kuo-Jung Su (2): usb: ehci: replace multiple use of le16_to_cpu(req->index) with varia= ble usb: ehci: prevent bad PORTSC register access Lucas Stach (13): video: ipu-fb: mark internally used functions as static ARM: imx6: select OFTREE video: MTL017: depend on I2C video: simple-panel: mode support depends on I2C and EDID video: backlight: add fallbacks for client functions video: fbcon: needs console support ARM: socfpga: select OFTREE and OFDEVICE mfd: da9053: remove references to nonexistent cdev member wd: add stub for of_get_watchdog_priority reset-source: add stub for of_get_reset_source_priority net: e1000: correct function signature of set_ethaddr ARM: add implementation for dma_alloc_writecombine for !CONFIG_MMU passwd: avoid NULL ptr usage Peter Mamonov (2): usb: ehci-hcd: initialize ehci->qh_list[] with zeros ata: ide-sff: fix integer overflow in ata_wait_ready() Philipp Zabel (4): ARM: pfla02: align with and include mainline DT ARM: pbab01: align with and include mainline DT ARM: pfla02: Add notice about the used environment partition mfd: da9063: add da9063 watchdog and system restart driver Robert Jarzmik (2): mtd: nand: mrvl-nand: create initial empty bbt ARM: pxa: zylonite: convert to generic default environment Sascha Hauer (67): ARM: PXA: use generic gpio prototypes ARM: MMU: Fix order when flushing inner/outer cache video: imx-hdmi: sync with kernel video: ipuv3: Adjust videomode to IPU limitations implement dma_alloc_writecombine fb: imx-ipu-v3: Use writecombine memory for fb ARM: boards: include gpio.h instead of mach/gpio.h ARM: l2x0: Implement L310 support ARM: l2x0: Flush cache before disabling it ARM: l2x0: Add some informational debug messages ARM: i.MX6: Enable l2 cache gpio: Drop asm-generic/gpio.h splash command: depend on CONFIG_VIDEO video: fbconsole: do not enter when we are already in fbconsole fb: return original fb_info in FBIOGET_SCREENINFO fb: Add shadowfb support splash command: simplify offscreen rendering gui: Use fb provided shadowfb for offscreen rendering gui: implement blitting screen areas fb: fbconsole: print cursor after clearing the screen fb: fbconsole: Add missing blits ARM: socfpga: Configure console from device tree serial: ns16550: Set linux_console_name param_enum: Make name strings const param_enum: protect against invalid values watchdog: imxwd: remove remove callback mtd: m25p80: make it possible to use large blocks if desired restart: replace reset_cpu with registered restart handlers watchdog: Allow multiple watchdogs watchdog: Give watchdogs a name reset-source: Use globalvar_add_simple_enum reset-source: Allow different priorities login: rework login mechanism login: cleanup password code login: check return value of digest_alloc crypto: fix selecting of digests login: explain PASSWORD_DEFAULT option reset-source: Add some debugging aids mtd: spi-nor: mostly drop lock/unlock code watchdog: Fix static inline ops boot command: Allow to enable watchdog commands: ubiformat: Document -y option spi: i.MX: use start mode control bit spi: i.MX: create SoC specific transfer functions spi: i.MX: optimize transfers for ECSPI v2.3 cdev: Add function to find cdev by device_node of_path: Allow pointing directly to the partition ARM: dts: directly point to partitions in the barebox,environment bin= ding Merge branch 'for-next/arm-l2x0' Merge branch 'for-next/fb' Merge branch 'for-next/fb-imx-ipu-v3' Merge branch 'for-next/gpio' Merge branch 'for-next/imx' Merge branch 'for-next/login' Merge branch 'for-next/misc' Merge branch 'for-next/mtd' Merge branch 'for-next/of_path' Merge branch 'for-next/param' Merge branch 'for-next/restart' Merge branch 'for-next/socfpga' Merge branch 'for-next/usb' of_fix_tree: Print error message of_fix_tree: do not fail when fixup fails state: write names in enum32 variables to oftree again state: check return value of of_property_count_strings Revert "spi: i.MX: optimize transfers for ECSPI v2.3" Release v2015.10.0 Steffen Trumtrar (5): ARM: dts: remove most of socfpga barebox-specific dt code clk: socfpga: fix dt binding support gpio: dw: fix copy&paste variable name gpio: dw: implement new bindings clk: socfpga: don't register fixed clocks Uwe Kleine-K=F6nig (1): video: imx: assert that image buffer doesn't cross a 4 MiB boundary Wadim Egorov (1): net: dhcp: Fix CONFIG variable name .../bindings/barebox/barebox,environment.rst | 5 +- Documentation/devicetree/bindings/mtd/m25p80.rst | 10 + Makefile | 2 +- arch/arm/Kconfig | 2 + arch/arm/boards/phytec-phycore-pxa270/board.c | 2 +- arch/arm/boards/phytec-phyflex-imx6/board.c | 31 +- arch/arm/boards/zylonite/board.c | 3 + arch/arm/boards/zylonite/env/bin/init | 25 - arch/arm/boards/zylonite/env/bin/mtd_env_override | 4 - arch/arm/boards/zylonite/env/boot/nand-ubi | 5 + arch/arm/boards/zylonite/env/config | 6 - arch/arm/boards/zylonite/env/init/mtdparts-nand | 11 + arch/arm/boards/zylonite/env/nv/hostname | 1 + .../arm/boards/zylonite/env/nv/linux.bootargs.base | 1 + .../boards/zylonite/env/nv/linux.bootargs.console | 1 + arch/arm/configs/socfpga_defconfig | 2 +- arch/arm/configs/zylonite310_defconfig | 12 +- arch/arm/cpu/cache-l2x0.c | 48 +- arch/arm/cpu/cache.c | 2 + arch/arm/cpu/cpu.c | 3 +- arch/arm/cpu/mmu.c | 22 +- arch/arm/dts/imx27-phytec-phycore-rdk.dts | 8 +- arch/arm/dts/imx51-babbage.dts | 4 +- arch/arm/dts/imx53-qsb-common.dtsi | 4 +- arch/arm/dts/imx6dl-eltec-hipercam.dts | 4 +- arch/arm/dts/imx6dl-phytec-pfla02.dtsi | 4 - arch/arm/dts/imx6q-phytec-pbab01.dts | 4 - arch/arm/dts/imx6q-phytec-pcaaxl3.dtsi | 8 +- arch/arm/dts/imx6q-phytec-pfla02.dtsi | 4 - arch/arm/dts/imx6q-sabresd.dts | 2 +- arch/arm/dts/imx6q-var-custom.dts | 2 +- arch/arm/dts/imx6q-var-som.dtsi | 2 +- arch/arm/dts/imx6qdl-phytec-pbab01.dtsi | 16 +- arch/arm/dts/imx6qdl-phytec-pfla02.dtsi | 137 +---- arch/arm/dts/imx6qdl-sabresd.dtsi | 2 +- arch/arm/dts/imx6s-riotboard.dts | 4 +- arch/arm/dts/socfpga.dtsi | 659 +----------------= ---- arch/arm/dts/socfpga_cyclone5.dtsi | 78 --- arch/arm/dts/socfpga_cyclone5_socdk.dts | 43 +- arch/arm/dts/socfpga_cyclone5_sockit.dts | 43 +- arch/arm/dts/socfpga_cyclone5_socrates.dts | 33 +- arch/arm/include/asm/dma.h | 5 + arch/arm/include/asm/gpio.h | 10 - arch/arm/include/asm/mmu.h | 1 + arch/arm/lib/bootm.c | 7 +- arch/arm/mach-at91/at91rm9200_time.c | 14 +- arch/arm/mach-at91/at91sam9_reset.S | 4 +- arch/arm/mach-at91/at91sam9g45_reset.S | 4 +- arch/arm/mach-at91/bootstrap.c | 3 +- arch/arm/mach-at91/include/mach/gpio.h | 2 - arch/arm/mach-at91/setup.c | 9 + arch/arm/mach-bcm2835/core.c | 21 +- arch/arm/mach-clps711x/reset.c | 12 +- arch/arm/mach-davinci/time.c | 14 +- arch/arm/mach-digic/Makefile | 2 +- arch/arm/mach-digic/core.c | 25 - arch/arm/mach-ep93xx/clocksource.c | 19 +- arch/arm/mach-ep93xx/include/mach/gpio.h | 1 - arch/arm/mach-highbank/reset.c | 14 +- arch/arm/mach-imx/Kconfig | 3 + arch/arm/mach-imx/imx6.c | 35 ++ arch/arm/mach-mvebu/armada-370-xp.c | 9 +- arch/arm/mach-mvebu/common.c | 13 - arch/arm/mach-mvebu/dove.c | 9 +- arch/arm/mach-mvebu/include/mach/common.h | 1 - arch/arm/mach-mvebu/kirkwood.c | 9 +- arch/arm/mach-mxs/include/mach/gpio.h | 21 - arch/arm/mach-mxs/soc-imx23.c | 8 +- arch/arm/mach-mxs/soc-imx28.c | 9 +- arch/arm/mach-netx/generic.c | 23 +- arch/arm/mach-nomadik/reset.c | 15 +- arch/arm/mach-omap/am33xx_generic.c | 7 +- arch/arm/mach-omap/include/mach/am33xx-generic.h | 2 - arch/arm/mach-omap/include/mach/omap3-generic.h | 2 - arch/arm/mach-omap/include/mach/omap4-generic.h | 2 - arch/arm/mach-omap/omap3_generic.c | 8 +- arch/arm/mach-omap/omap4_generic.c | 7 +- arch/arm/mach-omap/omap_generic.c | 11 - arch/arm/mach-pxa/common.c | 14 +- arch/arm/mach-pxa/gpio.c | 32 + arch/arm/mach-pxa/include/plat/gpio.h | 32 - arch/arm/mach-rockchip/core.c | 16 +- arch/arm/mach-samsung/generic.c | 15 +- arch/arm/mach-samsung/gpio-s3c24x0.c | 2 +- arch/arm/mach-samsung/include/mach/gpio.h | 18 - arch/arm/mach-socfpga/reset-manager.c | 14 +- arch/arm/mach-tegra/tegra20-pmc.c | 9 +- arch/arm/mach-uemd/Makefile | 2 +- arch/arm/mach-uemd/reset.c | 24 - arch/arm/mach-versatile/core.c | 7 +- arch/arm/mach-vexpress/reset.c | 15 +- arch/arm/mach-zynq/zynq.c | 24 +- arch/blackfin/lib/cpu.c | 13 +- arch/blackfin/lib/traps.c | 5 +- arch/efi/efi/efi.c | 13 +- arch/mips/include/asm/gpio.h | 6 - arch/mips/lib/bootm.c | 3 +- arch/mips/mach-ar231x/ar231x_reset.c | 8 +- arch/mips/mach-ath79/reset.c | 15 +- arch/mips/mach-bcm47xx/reset.c | 16 +- arch/mips/mach-loongson/loongson1_reset.c | 15 +- arch/mips/mach-malta/reset.c | 16 +- arch/nios2/cpu/cpu.c | 12 +- arch/openrisc/cpu/cpu.c | 11 +- arch/ppc/boards/freescale-p1010rdb/p1010rdb.c | 2 +- arch/ppc/boards/geip-da923rc/da923rc.c | 1 + arch/ppc/lib/ppclinux.c | 3 +- arch/ppc/mach-mpc5xxx/cpu.c | 11 +- arch/ppc/mach-mpc85xx/cpu.c | 14 +- arch/ppc/mach-mpc85xx/include/mach/gpio.h | 2 - arch/sandbox/board/Makefile | 1 + arch/sandbox/board/restart.c | 17 + arch/sandbox/mach-sandbox/include/mach/linux.h | 1 + arch/sandbox/os/common.c | 6 +- arch/x86/mach-i386/Makefile | 2 - arch/x86/mach-i386/reset.c | 30 - commands/Kconfig | 13 +- commands/boot.c | 26 +- commands/login.c | 70 +-- commands/menutree.c | 3 + commands/reset.c | 3 +- commands/splash.c | 21 +- commands/ubiformat.c | 1 + common/Kconfig | 16 +- common/Makefile | 1 + common/console.c | 6 - common/console_common.c | 27 - common/console_simple.c | 6 - common/hush.c | 3 + common/misc.c | 3 +- common/oftree.c | 3 +- common/parser.c | 3 + common/password.c | 124 ++-- common/reset_source.c | 31 +- common/restart.c | 112 ++++ common/startup.c | 7 +- common/state.c | 18 +- crypto/Kconfig | 2 +- defaultenv/defaultenv-2-base/bin/init | 18 - drivers/ata/ide-sff.c | 2 +- drivers/clk/socfpga.c | 86 +-- drivers/eeprom/at24.c | 38 ++ drivers/gpio/gpio-dw.c | 85 ++- drivers/i2c/algos/i2c-algo-bit.c | 44 +- drivers/i2c/busses/i2c-gpio.c | 10 + drivers/i2c/busses/i2c-imx.c | 12 +- drivers/i2c/busses/i2c-omap.c | 88 ++- drivers/i2c/i2c.c | 130 ++++ drivers/mci/mmci.c | 18 +- drivers/mfd/Kconfig | 11 + drivers/mfd/Makefile | 2 + drivers/mfd/da9053.c | 307 ++++++++++ drivers/mfd/da9063.c | 169 ++++++ drivers/mtd/devices/m25p80.c | 6 +- drivers/mtd/nand/nand_mrvl_nfc.c | 5 +- drivers/mtd/spi-nor/cadence-quadspi.c | 2 +- drivers/mtd/spi-nor/spi-nor.c | 100 +--- drivers/net/e1000.c | 2 +- drivers/of/of_path.c | 14 +- drivers/of/partition.c | 4 +- drivers/serial/serial_ns16550.c | 2 + drivers/spi/imx_spi.c | 53 +- drivers/usb/gadget/f_fastboot.c | 3 +- drivers/usb/host/ehci-hcd.c | 40 +- drivers/video/Kconfig | 2 + drivers/video/fb.c | 51 +- drivers/video/fbconsole.c | 18 +- drivers/video/imx-ipu-fb.c | 6 +- drivers/video/imx-ipu-v3/imx-hdmi.c | 380 +++++++----- drivers/video/imx-ipu-v3/imx-hdmi.h | 3 +- drivers/video/imx-ipu-v3/ipufb.c | 32 +- drivers/video/imx.c | 49 +- drivers/video/simple-panel.c | 3 +- drivers/watchdog/davinci_wdt.c | 1 + drivers/watchdog/im28wd.c | 1 + drivers/watchdog/imxwd.c | 35 +- drivers/watchdog/jz4740.c | 37 +- drivers/watchdog/wd_core.c | 70 ++- fs/devfs-core.c | 13 + include/asm-generic/gpio.h | 9 - include/common.h | 1 - include/console.h | 3 - include/dma.h | 1 + include/driver.h | 2 + include/fb.h | 3 + include/globalvar.h | 4 +- include/gpio.h | 23 +- include/gui/graphic_utils.h | 6 +- include/gui/gui.h | 6 +- include/i2c/i2c.h | 45 ++ include/linux/mtd/spi-nor.h | 4 +- include/param.h | 4 +- include/password.h | 22 +- include/reset_source.h | 18 +- include/restart.h | 21 + include/spi/imx-spi.h | 1 + include/video/backlight.h | 17 + include/watchdog.h | 16 +- lib/gui/graphic_utils.c | 49 +- lib/libfile.c | 6 +- lib/parameter.c | 12 +- net/dhcp.c | 2 +- 202 files changed, 2709 insertions(+), 2084 deletions(-) create mode 100644 Documentation/devicetree/bindings/mtd/m25p80.rst delete mode 100644 arch/arm/boards/zylonite/env/bin/init delete mode 100644 arch/arm/boards/zylonite/env/bin/mtd_env_override create mode 100644 arch/arm/boards/zylonite/env/boot/nand-ubi delete mode 100644 arch/arm/boards/zylonite/env/config create mode 100644 arch/arm/boards/zylonite/env/init/mtdparts-nand create mode 100644 arch/arm/boards/zylonite/env/nv/hostname create mode 100644 arch/arm/boards/zylonite/env/nv/linux.bootargs.base create mode 100644 arch/arm/boards/zylonite/env/nv/linux.bootargs.console delete mode 100644 arch/arm/dts/socfpga_cyclone5.dtsi delete mode 100644 arch/arm/include/asm/gpio.h delete mode 100644 arch/arm/mach-digic/core.c delete mode 100644 arch/arm/mach-ep93xx/include/mach/gpio.h delete mode 100644 arch/arm/mach-mxs/include/mach/gpio.h delete mode 100644 arch/arm/mach-samsung/include/mach/gpio.h delete mode 100644 arch/arm/mach-uemd/reset.c delete mode 100644 arch/mips/include/asm/gpio.h create mode 100644 arch/sandbox/board/restart.c delete mode 100644 arch/x86/mach-i386/reset.c create mode 100644 common/restart.c create mode 100644 drivers/mfd/da9053.c create mode 100644 drivers/mfd/da9063.c delete mode 100644 include/asm-generic/gpio.h create mode 100644 include/restart.h -- = Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox