From: Sascha Hauer <s.hauer@pengutronix.de>
To: Trent Piepho <tpiepho@kymetacorp.com>
Cc: barebox <barebox@lists.infradead.org>
Subject: Re: [PATCH] omap socfpga: Switch in flash env loading to use different config
Date: Thu, 5 Nov 2015 09:03:34 +0100 [thread overview]
Message-ID: <20151105080334.GD8526@pengutronix.de> (raw)
In-Reply-To: <1446671421.4553.5.camel@rtred1test09.kymeta.local>
On Wed, Nov 04, 2015 at 09:10:20PM +0000, Trent Piepho wrote:
> On these systems, the base arch has code to load the in flash
> environment from a file located in a FAT filesystem. This was
> controlled by the config option DEFAULT_ENVIRONMENT. However, that
> option turns on compiling the env into the barebox binary itself, as a
> backup if the in flash env can't be loaded.
>
> Most other boards have in flash env support unconditionally. But omap
> and socfpga also have xloader configurations, which aren't supposed to
> have environment support, either in flash or compiled in. If the in
> flash env code were unconditional, then the xloaders would gain it.
>
> So the code depends on ENV_HANDLING, which is only set on those boards
> that are supposed to have an in flash env and not set on all the
> boards that aren't supposed to have it.
>
> If someone wanted to create a board that did have a saved env, but
> used an alternate to this generic omap/socfpga file in FAT method,
> then they'd probably want to create a new config option to control
> this code and have it not be enabled for their board.
>
> Signed-off-by: Trent Piepho <tpiepho@kymetacorp.com>
Applied, thanks
Sascha
> ---
>
> I tested all existing OMAP defconfigs, and omap_env_init's presence or
> absence is unchanged after this patch.
>
> arch/arm/mach-omap/omap_generic.c | 10 ++++++----
> arch/arm/mach-socfpga/generic.c | 10 ++++++----
> 2 files changed, 12 insertions(+), 8 deletions(-)
>
> diff --git a/arch/arm/mach-omap/omap_generic.c b/arch/arm/mach-omap/omap_generic.c
> index 165487c..071a1bf 100644
> --- a/arch/arm/mach-omap/omap_generic.c
> +++ b/arch/arm/mach-omap/omap_generic.c
> @@ -107,7 +107,8 @@ const char *omap_get_bootmmc_devname(void)
> return omap_bootmmc_dev;
> }
>
> -#if defined(CONFIG_DEFAULT_ENVIRONMENT)
> +#if defined(CONFIG_ENV_HANDLING)
> +#define ENV_PATH "/boot/barebox.env"
> static int omap_env_init(void)
> {
> struct stat s;
> @@ -132,18 +133,19 @@ static int omap_env_init(void)
> free(partname);
>
> if (ret) {
> - printf("no %s. using default env\n", diskdev);
> + pr_err("Failed to load environment: no device '%s'\n", diskdev);
> return 0;
> }
>
> mkdir("/boot", 0666);
> ret = mount(diskdev, "fat", "/boot", NULL);
> if (ret) {
> - printf("failed to mount %s\n", diskdev);
> + pr_err("Failed to load environment: mount %s failed (%d)\n", diskdev, ret);
> return 0;
> }
>
> - default_environment_path_set("/boot/barebox.env");
> + pr_debug("Loading default env from %s on device %s\n", ENV_PATH, diskdev);
> + default_environment_path_set(ENV_PATH);
>
> return 0;
> }
> diff --git a/arch/arm/mach-socfpga/generic.c b/arch/arm/mach-socfpga/generic.c
> index 6259354..234dc52 100644
> --- a/arch/arm/mach-socfpga/generic.c
> +++ b/arch/arm/mach-socfpga/generic.c
> @@ -76,7 +76,8 @@ static int socfpga_init(void)
> }
> core_initcall(socfpga_init);
>
> -#if defined(CONFIG_DEFAULT_ENVIRONMENT)
> +#if defined(CONFIG_ENV_HANDLING)
> +#define ENV_PATH "/boot/barebox.env"
> static int socfpga_env_init(void)
> {
> struct stat s;
> @@ -92,18 +93,19 @@ static int socfpga_env_init(void)
> ret = stat(partname, &s);
>
> if (ret) {
> - printf("no %s. using default env\n", diskdev);
> + pr_err("Failed to load environment: no device '%s'\n", diskdev);
> goto out_free;
> }
>
> mkdir("/boot", 0666);
> ret = mount(partname, "fat", "/boot", NULL);
> if (ret) {
> - printf("failed to mount %s\n", diskdev);
> + pr_err("Failed to load environment: mount %s failed (%d)\n", partname, ret);
> goto out_free;
> }
>
> - default_environment_path_set("/boot/barebox.env");
> + pr_debug("Loading default env from %s on device %s\n", ENV_PATH, diskdev);
> + default_environment_path_set(ENV_PATH);
>
> out_free:
> free(partname);
> --
> 1.8.3.1
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
prev parent reply other threads:[~2015-11-05 8:03 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-04 21:10 Trent Piepho
2015-11-05 8:03 ` Sascha Hauer [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20151105080334.GD8526@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=tpiepho@kymetacorp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox