mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Stefan Christ <s.christ@phytec.de>
To: Sascha Hauer <s.hauer@pengutronix.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH 10/10] ARM: imx6dl: Add support for Phytec phyCORE-i.MX6 SOM
Date: Mon, 9 Nov 2015 09:50:08 +0100	[thread overview]
Message-ID: <20151109085008.GE2347@lws-christ> (raw)
In-Reply-To: <20151109064526.GT8526@pengutronix.de>

Hi,

> 
> Applied all except this one.
> 
> This patch misses something. Compilation fails with:
> 
> Error: /ptx/work/dude/WORK_A/sha/backup/barebox/barebox/arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi:38.1-8 Label or path ecspi1 not found
> Error: /ptx/work/dude/WORK_A/sha/backup/barebox/barebox/arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi:75.1-5 Label or path fec not found
> Error: /ptx/work/dude/WORK_A/sha/backup/barebox/barebox/arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi:81.1-6 Label or path gpmi not found
> Error: /ptx/work/dude/WORK_A/sha/backup/barebox/barebox/arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi:115.1-6 Label or path i2c3 not found
> Error: /ptx/work/dude/WORK_A/sha/backup/barebox/barebox/arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi:134.5-6 syntax error
> 
> Sascha

Ups. I'll send a v2.

Mit freundlichen Grüßen / Kind regards,
	Stefan Christ

On Mon, Nov 09, 2015 at 07:45:26AM +0100, Sascha Hauer wrote:
> On Fri, Nov 06, 2015 at 11:21:58AM +0100, Stefan Christ wrote:
> > From: Christian Hemp <c.hemp@phytec.de>
> > 
> > Add Phytec phyCORE-i.MX6 SOM.
> >      - imx6dl-phytec-phycore-som-nand
> >         - 256GB RAM on 1 Bank with 32Bit
> >         - 10/100MBit Ethernet
> >         - NAND
> >         - SD
> >         - UART
> > 
> > Signed-off-by: Stefan Christ <s.christ@phytec.de>
> > Signed-off-by: Christian Hemp <c.hemp@phytec.de>
> > ---
> 
> Applied all except this one.
> 
> This patch misses something. Compilation fails with:
> 
> Error: /ptx/work/dude/WORK_A/sha/backup/barebox/barebox/arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi:38.1-8 Label or path ecspi1 not found
> Error: /ptx/work/dude/WORK_A/sha/backup/barebox/barebox/arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi:75.1-5 Label or path fec not found
> Error: /ptx/work/dude/WORK_A/sha/backup/barebox/barebox/arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi:81.1-6 Label or path gpmi not found
> Error: /ptx/work/dude/WORK_A/sha/backup/barebox/barebox/arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi:115.1-6 Label or path i2c3 not found
> Error: /ptx/work/dude/WORK_A/sha/backup/barebox/barebox/arch/arm/dts/imx6qdl-phytec-phycore-som.dtsi:134.5-6 syntax error
> 
> Sascha
> 
> -- 
> Pengutronix e.K.                           |                             |
> Industrial Linux Solutions                 | http://www.pengutronix.de/  |
> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2015-11-09  8:50 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-11-06 10:21 [PATCH 00/10] Rework towards phytec-som-imx6 and new variants Stefan Christ
2015-11-06 10:21 ` [PATCH 01/10] ARM: imx6: phycard: use numeric suffix in device tree Stefan Christ
2015-11-06 10:21 ` [PATCH 02/10] boards: Add phytec-som-imx6 Stefan Christ
2015-11-06 10:21 ` [PATCH 03/10] ARM: phytec-som-imx6: set loadaddr to start of DDR memory Stefan Christ
2015-11-06 10:21 ` [PATCH 04/10] ARM: phytec-som-imx6: update environment Stefan Christ
2015-11-06 10:21 ` [PATCH 05/10] ARM: pfla02: append suffix 1bank Stefan Christ
2015-11-06 10:21 ` [PATCH 06/10] ARM: imx6q: pfla02: Add support for 512MiB RAM on one bank Stefan Christ
2015-11-06 10:21 ` [PATCH 07/10] ARM: imx6dl: pfla02: Add support for 128MB and 256MB RAM Stefan Christ
2015-11-06 10:21 ` [PATCH 08/10] ARM: imx6q: pfla02: add phyFLEX-i.MX6 DualLite 1GiB on one bank Stefan Christ
2015-11-06 10:21 ` [PATCH 09/10] ARM: imx6q: Add support for Phytec phyCORE-i.MX6 SOM Stefan Christ
2015-11-06 10:21 ` [PATCH 10/10] ARM: imx6dl: " Stefan Christ
2015-11-09  6:45   ` Sascha Hauer
2015-11-09  8:50     ` Stefan Christ [this message]
2015-11-09  6:49 ` [PATCH 00/10] Rework towards phytec-som-imx6 and new variants Sascha Hauer
2015-11-09 12:09   ` Stefan Christ
2015-11-10  8:36     ` Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20151109085008.GE2347@lws-christ \
    --to=s.christ@phytec.de \
    --cc=barebox@lists.infradead.org \
    --cc=s.hauer@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox