* v2015.12.0
@ 2015-12-08 6:54 Sascha Hauer
0 siblings, 0 replies; only message in thread
From: Sascha Hauer @ 2015-12-08 6:54 UTC (permalink / raw)
To: Barebox List
Hi All,
We have a release for December. It contains a lot of nice cleanups and
fixes.
One nice thing is that with this release the multiimage generation has
become more consistent. With multiimage support the barebox-flash-image
link will now point to a non existing file indicating we have multiimage
support and additionally a list of generated images is created under
barebox-flash-images. This should help distributions (and humans) to
pick the correct file.
For everything else see below.
Have a nice christmas time
Sascha
----------------------------------------------------------------
Aleksey Kuleshov (3):
fbconsole: no need to copy extra line
fb: satisfy semantics for shadowfb's alloc/free
fb: alloc or free shadowfb whether fb enabled or disabled
Alexander Aring (2):
loadb: add missing brackets in help
checkpatch: fix left brace warning
Andrey Smirnov (10):
freescale-mx6-sabresd: Add CONFIG_DEBUG_LL support
memtest.c: Print iterations count if -i is 0
arm: Disable unaligned accesses
common/command.c: Replace magic number with appropriate constant
common/parser.c: Do not conflate error reporting disciplines
common/parser.c: Do not treat zero return code as error
ARM: Add support for semihosting
arm/cpu/start.c: Distil some common code in __start().
arm/cpu: Avoid multiple definitions of barebox_arm_entry
fs: smhfs: Fix return value of truncate()
Anton Bondarenko (4):
embedsky-e9: cleanup and reorder DTS nodes
net: phy: wait for link OK after successfull autonegotiation
embedsky-e9: enable barebox_update command for booter update
images: Embedsky E9: use image name like the rest of boards
Antony Pavlov (11):
commands: add clk_get_rate command
clock.h: include <types.h> under guard macro
commands: clk_dump: use COMMAND_SUCCESS instead of 0 return code
MIPS: ath79: add pbl_ar9331_ddr2_config macro
MIPS: ath79: add pbl_ar9331_uart_enable macro
MIPS: ath79: add debug_ll_ar9331_init macro
MIPS: ath79: add black-swift board support
MIPS: ath79: add black-swift_defconfig
MIPS: ath79: add pbl_ar9331_ddr1_config macro
MIPS: tplink-mr3020: add pbl low level init
MIPS: tplink-mr3020_defconfig: enable pbl; make image shorter
Enrico Jorns (2):
edit: handle write() call errors in save_file()
edit: return error when save_file failed
Eric Nelson (2):
imx6-mmdc: fix automatic power down enable in write level calibration
imx6-mmdc: restore RALAT/WALAT in MMDC0, not MMDC1
Jan Remmet (1):
net: eth: Remove ethaddr_param
Lucas Stach (5):
ARM: l2x0: correct indentation
ARM: l2x0: move outer cache flush on disable to user
ARM: imx6: use l2x0 header for register definitions
ARM: imx6: set shared attribute override bit in PL310
ARM: imx6: add OF fixup to delete nonexistent CPU cores
Marek Vasut (1):
imx6-mmdc: Fix MAPSR usage
Michael Grzeschik (1):
ARM: i.MX6: add Technexion Wandboard support
Oleksij Rempel (1):
MIPS: ath79: add pbl_ar9331_pll macro
Peter Mamonov (5):
input: usb_kbd: skip poll on -EAGAIN error
usb: core: return -EAGAIN on usb_* functions reentrance
ata: disk_ata_drive: remove obsolete check for ID validity
mips: c-r4k: detect secondary cache
mips: cpuinfo: report secondary cache configuration
Robert Jarzmik (2):
net: smc1111: fix ethernet mac setting
ARM: pxa: pxa2xx use PSPR for resume address
Sascha Hauer (39):
Revert "usb: ehci-hcd: use mdelay_non_interruptible()"
Revert "usb: ehci-hcd: detect re-entrance"
usb: ehci-hcd: Use regular mdelay()
fs: devfs: Allow mounting only on /dev/
fs: devfs: Allow mount path in cdev_open
filetype: Use cdev_open
fs: pass path directly to cdev_open
logo: Makefile: remove debug output
scripts/kwbimage: Move configfile opening to the function that reads it
scripts/kwbimage: Make BINARY files relative to config file
ARM: mvebu: Lenovo IX4 300D: Fix pblb generation
of_dump: Add option to print node names only
memtest: move request/release regions to common/
ARM: Eltec-hypercam: Add missing dcdofd in flash header
ARM: Allow compressed dtb binaries
ARM: i.MX6dl: dts: include arm/imx6dl.dtsi from board files
video: ipuv3: Silence VPL message
rework remap_range
memtest: split tests in separate functions
memtest: Make output more compact
memtest: Make comments single line when appropriate
memtest: move ctrlc check / progress showing into separate function
memtest: move error handling to end of function
memtest: By default only test biggest region
memtest: Make cached/uncached test configurable
Merge branch 'for-next/arm'
Merge branch 'for-next/imx'
Merge branch 'for-next/memtest'
Merge branch 'for-next/mips'
Merge branch 'for-next/misc'
Merge branch 'for-next/mvebu'
Merge branch 'for-next/net'
Merge branch 'for-next/usb'
ARM: calculate compressed dtb len correctly
pbl: console: Use console_putc to output the carriage return
ARM: Fix bug in remap_range
mtd: core: initialize *retlen in mtd_write()
Revert "memtest: move error handling to end of function"
Release v2015.12.0
Sebastian Hesselbarth (2):
clk: mvebu: Add corediv clock driver for Armada 370/XP
net: mvneta: add Armada XP compatible
Teresa Remmet (2):
dts: phyFLEX-AM335x: Disable second ethernet interface
ARM: am335x_defconfig: Enable SMSC phy driver
Trent Piepho (5):
net: eth: Refactor OF tree fixup of one node into new function
net: eth: Fixup OF tree with registered MAC addresses too
Make list of flash images and fix link all single image cases
mci: Print versions with micro levels correctly
omap socfpga: Switch in flash env loading to use different config
Uwe Kleine-König (1):
usb: mx25: fix bit position of "Host power mask"
Documentation/filesystems/smhfs.rst | 57 ++++
Makefile | 7 +-
arch/arm/Kconfig | 14 +
arch/arm/Makefile | 7 +
arch/arm/boards/Makefile | 1 +
.../flash-header-eltec-hipercam.imxcfg | 1 +
arch/arm/boards/embedsky-e9/board.c | 8 +
arch/arm/boards/freescale-mx6-sabresd/lowlevel.c | 22 ++
arch/arm/boards/globalscale-mirabox/kwbimage.cfg | 2 +-
arch/arm/boards/lenovo-ix4-300d/kwbimage.cfg | 2 +-
arch/arm/boards/lubbock/lowlevel.c | 2 +-
arch/arm/boards/mainstone/lowlevel.c | 2 +-
arch/arm/boards/marvell-armada-xp-gp/kwbimage.cfg | 2 +-
.../boards/plathome-openblocks-ax3/kwbimage.cfg | 2 +-
arch/arm/boards/technexion-wandboard/Makefile | 3 +
arch/arm/boards/technexion-wandboard/board.c | 78 +++++
.../boards/technexion-wandboard/env/boot/mmc2.1 | 3 +
.../technexion-wandboard/env/init/bootsource | 7 +
.../flash-header-technexion-wandboard.imxcfg | 3 +
arch/arm/boards/technexion-wandboard/lowlevel.c | 356 +++++++++++++++++++++
arch/arm/configs/am335x_defconfig | 2 +-
arch/arm/configs/imx_v7_defconfig | 1 +
arch/arm/cpu/Makefile | 4 +-
arch/arm/cpu/cache-l2x0.c | 6 +-
arch/arm/cpu/cpu.c | 4 +-
arch/arm/cpu/entry.c | 38 +++
arch/arm/cpu/entry.h | 18 ++
arch/arm/cpu/mmu.c | 42 ++-
arch/arm/cpu/start-pbl.c | 29 +-
arch/arm/cpu/start.c | 131 +++++---
arch/arm/cpu/uncompress.c | 16 +-
arch/arm/dts/Makefile | 1 +
arch/arm/dts/am335x-phytec-phyflex-som.dtsi | 5 +-
arch/arm/dts/imx6dl-cm-fx6.dts | 1 +
arch/arm/dts/imx6dl-dfi-fs700-m60-6s.dts | 1 +
arch/arm/dts/imx6dl-eltec-hipercam.dts | 1 +
arch/arm/dts/imx6dl-nitrogen6x.dts | 1 +
arch/arm/dts/imx6dl-phytec-pfla02.dtsi | 1 +
arch/arm/dts/imx6dl-sabrelite.dts | 1 +
arch/arm/dts/imx6dl-tqma6s.dtsi | 1 +
arch/arm/dts/imx6dl-wandboard.dts | 37 +++
arch/arm/dts/imx6dl.dtsi | 1 -
arch/arm/dts/imx6q-embedsky-e9.dtsi | 78 ++---
arch/arm/dts/imx6q-wandboard.dts | 37 +++
arch/arm/dts/imx6s-phytec-pfla02.dtsi | 1 +
arch/arm/dts/imx6s-riotboard.dts | 1 +
arch/arm/include/asm/barebox-arm.h | 9 +
arch/arm/include/asm/mmu.h | 23 +-
arch/arm/include/asm/semihosting.h | 19 ++
arch/arm/lib/Makefile | 1 +
arch/arm/lib/semihosting-trap.S | 28 ++
arch/arm/lib/semihosting.c | 227 +++++++++++++
arch/arm/mach-imx/Kconfig | 5 +
arch/arm/mach-imx/imx6-mmdc.c | 8 +-
arch/arm/mach-imx/imx6.c | 59 +++-
arch/arm/mach-omap/omap_generic.c | 10 +-
arch/arm/mach-socfpga/generic.c | 10 +-
arch/blackfin/include/asm/mmu.h | 14 +-
arch/mips/Makefile | 1 +
arch/mips/boards/black-swift/Makefile | 1 +
arch/mips/boards/black-swift/board.c | 27 ++
.../black-swift/include/board/board_pbl_start.h | 41 +++
.../tplink-mr3020/include/board/board_pbl_start.h | 6 +
arch/mips/configs/black-swift_defconfig | 46 +++
arch/mips/configs/tplink-mr3020_defconfig | 3 +
arch/mips/dts/black-swift.dts | 34 ++
arch/mips/include/asm/mmu.h | 14 +-
arch/mips/include/asm/pbl_macros.h | 32 ++
arch/mips/lib/c-r4k.c | 31 ++
arch/mips/lib/cpu-probe.c | 2 -
arch/mips/lib/cpuinfo.c | 11 +-
arch/mips/mach-ath79/Kconfig | 6 +
arch/mips/mach-ath79/include/mach/ar71xx_regs.h | 24 ++
arch/mips/mach-ath79/include/mach/debug_ll.h | 29 ++
arch/mips/mach-ath79/include/mach/pbl_macros.h | 182 +++++++++++
arch/nios2/include/asm/mmu.h | 14 +-
arch/openrisc/include/asm/mmu.h | 14 +-
arch/ppc/cpu-85xx/mmu.c | 26 +-
arch/ppc/include/asm/mmu.h | 24 +-
arch/sandbox/include/asm/mmu.h | 14 +-
arch/x86/include/asm/mmu.h | 14 +-
commands/clk.c | 59 +++-
commands/edit.c | 20 +-
commands/loadb.c | 4 +-
commands/memtest.c | 210 +++++-------
commands/of_dump.c | 21 +-
common/command.c | 2 +-
common/filetype.c | 4 +-
common/memtest.c | 236 +++++++++-----
common/parser.c | 18 +-
drivers/ata/disk_ata_drive.c | 17 -
drivers/clk/mvebu/Makefile | 4 +-
drivers/clk/mvebu/corediv.c | 262 +++++++++++++++
drivers/input/usb_kbd.c | 7 +-
drivers/mci/mci-core.c | 9 +-
drivers/mtd/core.c | 2 +
drivers/net/mvneta.c | 1 +
drivers/net/phy/phy.c | 13 +-
drivers/net/smc91111.c | 2 +-
drivers/usb/core/usb.c | 40 ++-
drivers/usb/host/ehci-hcd.c | 52 +--
drivers/usb/imx/imx-usb-misc.c | 2 +-
drivers/video/fb.c | 15 +-
drivers/video/fbconsole.c | 3 +-
drivers/video/imx-ipu-fb.c | 5 +-
drivers/video/imx-ipu-v3/ipufb.c | 2 +-
drivers/video/omap.c | 5 +-
drivers/video/stm.c | 5 +-
fs/Kconfig | 9 +
fs/Makefile | 1 +
fs/devfs-core.c | 6 +-
fs/devfs.c | 7 +
fs/fs.c | 9 +-
fs/smhfs.c | 178 +++++++++++
images/Makefile | 18 +-
images/Makefile.imx | 9 +-
images/Makefile.mvebu | 2 +-
include/clock.h | 3 +-
include/memtest.h | 8 +-
include/mmu.h | 41 +++
include/net.h | 1 -
include/usb/usb.h | 1 +
lib/logo/Makefile | 1 -
net/eth.c | 76 +++--
pbl/console.c | 2 +-
scripts/checkpatch.pl | 8 +-
scripts/gen-dtb-s | 19 ++
scripts/kwbimage.c | 51 +--
128 files changed, 2805 insertions(+), 712 deletions(-)
create mode 100644 Documentation/filesystems/smhfs.rst
create mode 100644 arch/arm/boards/technexion-wandboard/Makefile
create mode 100644 arch/arm/boards/technexion-wandboard/board.c
create mode 100644 arch/arm/boards/technexion-wandboard/env/boot/mmc2.1
create mode 100644 arch/arm/boards/technexion-wandboard/env/init/bootsource
create mode 100644 arch/arm/boards/technexion-wandboard/flash-header-technexion-wandboard.imxcfg
create mode 100644 arch/arm/boards/technexion-wandboard/lowlevel.c
create mode 100644 arch/arm/cpu/entry.c
create mode 100644 arch/arm/cpu/entry.h
create mode 100644 arch/arm/dts/imx6dl-wandboard.dts
create mode 100644 arch/arm/dts/imx6q-wandboard.dts
create mode 100644 arch/arm/include/asm/semihosting.h
create mode 100644 arch/arm/lib/semihosting-trap.S
create mode 100644 arch/arm/lib/semihosting.c
create mode 100644 arch/mips/boards/black-swift/Makefile
create mode 100644 arch/mips/boards/black-swift/board.c
create mode 100644 arch/mips/boards/black-swift/include/board/board_pbl_start.h
create mode 100644 arch/mips/configs/black-swift_defconfig
create mode 100644 arch/mips/dts/black-swift.dts
create mode 100644 arch/mips/mach-ath79/include/mach/pbl_macros.h
create mode 100644 drivers/clk/mvebu/corediv.c
create mode 100644 fs/smhfs.c
create mode 100644 include/mmu.h
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2015-12-08 6:54 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-12-08 6:54 v2015.12.0 Sascha Hauer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox